LinuxForum.Fans
Тема

[Нерешаемо] Проблемы с AMD Radeon HD4650 в Debian Squeeze AMD64

Автор: XRevan86 112 сообщений 27412 просмотров
#69250

Writer
После того, что было я не скоро вернусь к fglrx (у меня ).

Поставил драйвер radeon опять. Теперь в играх есть изображение, но мерцает какие-то чёрные прямоугольники.

text
user@DebPC:~$ cat /var/log/Xorg.0.log | grep WW
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/cyrillic".
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0x00df00d0 is: 0x00df00d0
(WW) RADEON(0):   MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000

Эффекты есть частично, но в меню Kwin упрямо говорит, что эффекты не поддерживаются

#69253

попробуй в xorg.conf в разделе драйвера добавить опции
Option "AccelMethod" "XAA"
Option "XAANoOffscreenPixmaps"

#69261

Writer
Мерцание не прекратилось, Kwin всё также думает. Однако, нижняя панель стала прозрачной %).

text
user@DebPC:~$ cat /var/log/Xorg.0.log | grep WW
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/cyrillic".
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0x00df00d0 is: 0x00df00d0
(WW) RADEON(0):   MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000
(WW) RADEON(0): Option "XAANoOffscreenPixmaps" is not used
#69272

Включил эффекты Kwin: в ~/.kde/share/config/kwinrc выставил CheckIsSafe=true.

#69283
Darth Revan написал:
Теперь в играх есть изображение, но мерцает какие-то чёрные прямоугольники.

С radeon.modeset=0 загружаешься? Если композит выключить, моргание пропадает? Если да, то композит так работает c dri.
Выход kms+dri2, попробуй ядро 2.6.35 из experimental и грузись уже с modeset.

#69285

Rus
В строку ядра прописать radeon.modeset=0? Я уже получал Epic Fail с новым ядром :-D.

#69286

Darth Revan, radeon.modeset=1, можно и вообще ничего не прописывать по идее, оно автоматом должно

Прописывать надо radeon.modeset=0 если нужно отключить kms

#69290

Rus
Иксы не загрузились.

#69591

Осталась только одна проблема (что хорошо): при включённом композитном режимы идёт мерцание в нативных OpenGL-приложениях (в Wine всё работает). Собственно, это не сильно страшно, учитывая то, что вместо LinCity-NG я могу играть в SimCity 3000 (или SimCity 4), который явно лучше.

Update: SimCity 3000 не заработал =(. А SimCity 4 сложно достать.

#75706

Думал, что в fglrx 10.8 всё заработает. Результат тот же.

Особая магия: у моей подруги тоже ATI HD4600 Series. Полёт нормальный.

#84981

И так: поставил Kubuntu Lucid (через debootstrap, чтобы диск не марать) на два компьютера с AMD Radeon HD 4600 Series (один - сабж, другой - друга). Через Jockey поставил fglrx.
Результат: на видеокарте друга всё чудесно работает, а на сабже - нет. Теперь я точно уверен, что настроить fglrx для работы с сабжем нельзя.
Ну и конечно: если видеокарта - дерьмо (как мягче?), то и поддержка такая же: http://forums.amd.com/game/messageview.cfm?catid=260&threadid=140123&highlight_key=y
Ну и напоследок /var/log/Xorg.0.log:

text
[    24.935] 
X.Org X Server 1.9.0
Release Date: 2010-08-20
[    24.935] X Protocol Version 11, Revision 0
[    24.935] Build Operating System: Linux 2.6.24-28-xen x86_64 Ubuntu
[    24.935] Current Operating System: Linux DebPC 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 x86_64
[    24.936] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=dabb1f2e-21ad-4c3d-b1c9-2dfec18efb55 ro vga=795 splash quiet
[    24.936] Build Date: 30 September 2010  07:35:54PM
[    24.936] xorg-server 2:1.9.0+git20100930+server-1.9-branch.4d2542a1-0ubuntu0sarvatt2 (For technical support please see http://www.ubuntu.com/support) 
[    24.936] Current version of pixman: 0.19.5
[    24.936]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    24.936] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    24.936] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct  3 18:11:11 2010
[    24.936] (==) Using config file: "/etc/X11/xorg.conf"
[    24.936] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    24.936] (==) No Layout section.  Using the first Screen section.
[    24.936] (**) |-->Screen "Default Screen" (0)
[    24.936] (**) |   |-->Monitor "<default monitor>"
[    24.936] (==) No device specified for screen "Default Screen".
    Using the first device section listed.
[    24.937] (**) |   |-->Device "Default Device"
[    24.937] (==) No monitor specified for screen "Default Screen".
    Using a default monitor configuration.
[    24.937] (==) Automatically adding devices
[    24.937] (==) Automatically enabling devices
[    24.937] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    24.937]     Entry deleted from font path.
[    24.937] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
[    24.937] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    24.937] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    24.937] (II) Loader magic: 0x7d1580
[    24.937] (II) Module ABI versions:
[    24.937]     X.Org ANSI C Emulation: 0.4
[    24.937]     X.Org Video Driver: 8.0
[    24.937]     X.Org XInput driver : 11.0
[    24.937]     X.Org Server Extension : 4.0
[    24.937] (--) PCI:*(0:1:0:0) 1002:9498:1787:2009 rev 0, Mem @ 0xd0000000/268435456, 0xfbee0000/65536, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
[    24.947] (II) Open ACPI successful (/var/run/acpid.socket)
[    24.947] (II) "extmod" will be loaded by default.
[    24.948] (II) "dbe" will be loaded by default.
[    24.948] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    24.948] (II) "record" will be loaded by default.
[    24.948] (II) "dri" will be loaded by default.
[    24.948] (II) "dri2" will be loaded by default.
[    24.948] (II) LoadModule: "glx"
[    24.948] (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
[    24.948] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[    24.948]     compiled for 7.6.0, module version = 1.0.0
[    24.949] (II) Loading extension GLX
[    24.949] (II) LoadModule: "extmod"
[    24.957] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    24.957] (II) Module extmod: vendor="X.Org Foundation"
[    24.957]     compiled for 1.9.0, module version = 1.0.0
[    24.957]     Module class: X.Org Server Extension
[    24.957]     ABI class: X.Org Server Extension, version 4.0
[    24.957] (II) Loading extension MIT-SCREEN-SAVER
[    24.958] (II) Loading extension XFree86-VidModeExtension
[    24.958] (II) Loading extension XFree86-DGA
[    24.958] (II) Loading extension DPMS
[    24.958] (II) Loading extension XVideo
[    24.958] (II) Loading extension XVideo-MotionCompensation
[    24.958] (II) Loading extension X-Resource
[    24.958] (II) LoadModule: "dbe"
[    24.958] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    24.958] (II) Module dbe: vendor="X.Org Foundation"
[    24.958]     compiled for 1.9.0, module version = 1.0.0
[    24.958]     Module class: X.Org Server Extension
[    24.958]     ABI class: X.Org Server Extension, version 4.0
[    24.958] (II) Loading extension DOUBLE-BUFFER
[    24.958] (II) LoadModule: "record"
[    24.959] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    24.959] (II) Module record: vendor="X.Org Foundation"
[    24.959]     compiled for 1.9.0, module version = 1.13.0
[    24.959]     Module class: X.Org Server Extension
[    24.959]     ABI class: X.Org Server Extension, version 4.0
[    24.959] (II) Loading extension RECORD
[    24.959] (II) LoadModule: "dri"
[    24.959] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    24.959] (II) Module dri: vendor="X.Org Foundation"
[    24.962]     compiled for 1.9.0, module version = 1.0.0
[    24.962]     ABI class: X.Org Server Extension, version 4.0
[    24.962] (II) Loading extension XFree86-DRI
[    24.962] (II) LoadModule: "dri2"
[    24.962] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    24.962] (II) Module dri2: vendor="X.Org Foundation"
[    24.962]     compiled for 1.9.0, module version = 1.2.0
[    24.962]     ABI class: X.Org Server Extension, version 4.0
[    24.962] (II) Loading extension DRI2
[    24.962] (II) LoadModule: "fglrx"
[    24.962] (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
[    24.984] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    24.984]     compiled for 1.4.99.906, module version = 8.78.30
[    24.984]     Module class: X.Org Video Driver
[    24.985] (II) Loading sub module "fglrxdrm"
[    24.985] (II) LoadModule: "fglrxdrm"
[    24.985] (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
[    24.985] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    24.985]     compiled for 1.8.99.905, module version = 8.78.30
[    24.985] (II) ATI Proprietary Linux Driver Version Identifier:8.78.30
[    24.985] (II) ATI Proprietary Linux Driver Release Identifier: 8.78.3                               
[    24.985] (II) ATI Proprietary Linux Driver Build Date: Sep 20 2010 21:31:08
[    24.985] (++) using VT number 7

[ 25.006] (WW) Falling back to old probe method for fglrx [ 25.012] (II) Loading PCS database from /etc/ati/amdpcsdb [ 25.012] (--) Assigning device section with no busID to primary device [ 25.012] (--) Chipset Supported AMD Graphics Processor (0x9498) found [ 25.012] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 25.013] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 25.013] (II) AMD Video driver is signed [ 25.013] (II) fglrx(0): pEnt->device->identifier=0x240b480 [ 25.013] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin [ 25.013] (II) Loading sub module "vgahw" [ 25.013] (II) LoadModule: "vgahw" [ 25.014] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 25.014] (II) Module vgahw: vendor="X.Org Foundation" [ 25.014] compiled for 1.9.0, module version = 0.1.0 [ 25.014] ABI class: X.Org Video Driver, version 8.0 [ 25.014] (II) fglrx(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 [ 25.014] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 25.014] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 25.014] (==) fglrx(0): Default visual is TrueColor [ 25.014] (==) fglrx(0): RGB weight 888 [ 25.014] (II) fglrx(0): Using 8 bits per RGB [ 25.014] (==) fglrx(0): Buffer Tiling is ON [ 25.014] (II) Loading sub module "fglrxdrm" [ 25.014] (II) LoadModule: "fglrxdrm" [ 25.014] (II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so [ 25.016] ukiDynamicMajor: found major device number 251 [ 25.016] ukiDynamicMajor: found major device number 251 [ 25.016] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 25.016] ukiOpenDevice: node name is /dev/ati/card0 [ 25.016] ukiOpenDevice: open result is 12, (OK) [ 25.016] ukiOpenByBusid: ukiOpenMinor returns 12 [ 25.016] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 25.017] (==) fglrx(0): NoAccel = NO [ 25.017] (==) fglrx(0): ATI 2D Acceleration Architecture enabled [ 25.017] (--) fglrx(0): Chipset: "ATI Radeon HD 4600 Series " (Chipset = 0x9498) [ 25.017] (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x2009) [ 25.017] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI [ 25.017] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 [ 25.017] (--) fglrx(0): MMIO registers at 0xfbee0000 [ 25.017] (--) fglrx(0): I/O port at 0x0000ee00 [ 25.017] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 25.018] (II) fglrx(0): AC Adapter is used [ 25.025] (II) fglrx(0): Primary V_BIOS segment is: 0xc000 [ 25.025] (II) Loading sub module "vbe" [ 25.025] (II) LoadModule: "vbe" [ 25.026] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 25.026] (II) Module vbe: vendor="X.Org Foundation" [ 25.026] compiled for 1.9.0, module version = 1.1.0 [ 25.026] ABI class: X.Org Video Driver, version 8.0 [ 25.026] (II) fglrx(0): VESA BIOS detected [ 25.026] (II) fglrx(0): VESA VBE Version 3.0 [ 25.026] (II) fglrx(0): VESA VBE Total Mem: 16384 kB [ 25.026] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS [ 25.026] (II) fglrx(0): VESA VBE OEM Software Rev: 11.22 [ 25.026] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. [ 25.026] (II) fglrx(0): VESA VBE OEM Product: BSK3G07-10R-01 [ 25.026] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 [ 25.061] (II) fglrx(0): ATI Video BIOS revision 9 or later detected [ 25.061] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR2 [ 25.061] (II) fglrx(0): PCIE card detected [ 25.061] (--) fglrx(0): Using per-process page tables (PPPT) as GART. [ 25.061] (WW) fglrx(0): board is an unknown third party board, chipset is supported [ 25.063] (II) fglrx(0): Using adapter: 1:0.0. [ 25.087] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000) [ 25.093] (II) fglrx(0): Interrupt handler installed at IRQ 42. [ 25.093] (II) fglrx(0): RandR 1.2 support is enabled! [ 25.093] (II) fglrx(0): RandR 1.2 rotation support is enabled! [ 25.093] (==) fglrx(0): Center Mode is disabled [ 25.093] (II) Loading sub module "fb" [ 25.093] (II) LoadModule: "fb" [ 25.093] (II) Loading /usr/lib/xorg/modules/libfb.so [ 25.094] (II) Module fb: vendor="X.Org Foundation" [ 25.094] compiled for 1.9.0, module version = 1.0.0 [ 25.094] ABI class: X.Org ANSI C Emulation, version 0.4 [ 25.094] (==) fglrx(0): Active stereo disabled [ 25.094] (II) Loading sub module "ddc" [ 25.094] (II) LoadModule: "ddc" [ 25.094] (II) Module "ddc" already built-in [ 25.526] (II) fglrx(0): Finished Initialize PPLIB! [ 25.529] (II) fglrx(0): Output DFP1 has no monitor section [ 25.529] (II) fglrx(0): Output DFP2 has no monitor section [ 25.529] (II) fglrx(0): Output CRT1 has no monitor section [ 25.529] (II) fglrx(0): Output CRT2 has no monitor section [ 25.529] (II) Loading sub module "ddc" [ 25.529] (II) LoadModule: "ddc" [ 25.529] (II) Module "ddc" already built-in [ 25.529] (II) fglrx(0): Connected Display0: DFP1 [ 25.529] (II) fglrx(0): Display0 EDID data --------------------------- [ 25.529] (II) fglrx(0): Manufacturer: ACR Model: ad73 Serial#: 1897929398 [ 25.529] (II) fglrx(0): Year: 2007 Week: 12 [ 25.529] (II) fglrx(0): EDID Version: 1.3 [ 25.529] (II) fglrx(0): Digital Display Input [ 25.529] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30 [ 25.529] (II) fglrx(0): Gamma: 2.07 [ 25.529] (II) fglrx(0): DPMS capabilities: Off [ 25.529] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 25.529] (II) fglrx(0): First detailed timing is preferred mode [ 25.529] (II) fglrx(0): redX: 0.634 redY: 0.354 greenX: 0.286 greenY: 0.620 [ 25.529] (II) fglrx(0): blueX: 0.138 blueY: 0.076 whiteX: 0.312 whiteY: 0.328 [ 25.529] (II) fglrx(0): Supported established timings: [ 25.529] (II) fglrx(0): 720x400@70Hz [ 25.529] (II) fglrx(0): 640x480@60Hz [ 25.529] (II) fglrx(0): 640x480@67Hz [ 25.529] (II) fglrx(0): 640x480@72Hz [ 25.529] (II) fglrx(0): 640x480@75Hz [ 25.529] (II) fglrx(0): 800x600@56Hz [ 25.529] (II) fglrx(0): 800x600@60Hz [ 25.529] (II) fglrx(0): 800x600@72Hz [ 25.529] (II) fglrx(0): 800x600@75Hz [ 25.529] (II) fglrx(0): 832x624@75Hz [ 25.529] (II) fglrx(0): 1024x768@60Hz [ 25.529] (II) fglrx(0): 1024x768@70Hz [ 25.529] (II) fglrx(0): 1024x768@75Hz [ 25.529] (II) fglrx(0): 1280x1024@75Hz [ 25.529] (II) fglrx(0): Manufacturer's mask: 0 [ 25.529] (II) fglrx(0): Supported standard timings: [ 25.529] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737 [ 25.529] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 25.529] (II) fglrx(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 25.529] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 60 vid: 16497 [ 25.529] (II) fglrx(0): #4: hsize: 1024 vsize 768 refresh: 75 vid: 20321 [ 25.529] (II) fglrx(0): #5: hsize: 1024 vsize 768 refresh: 60 vid: 16481 [ 25.529] (II) fglrx(0): #6: hsize: 800 vsize 600 refresh: 75 vid: 20293 [ 25.529] (II) fglrx(0): #7: hsize: 800 vsize 600 refresh: 60 vid: 16453 [ 25.529] (II) fglrx(0): Supported detailed timing: [ 25.529] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm [ 25.529] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 25.529] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 25.529] (II) fglrx(0): Serial No: L73083094247 [ 25.529] (II) fglrx(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz [ 25.529] (II) fglrx(0): Monitor name: Acer AL1917 [ 25.529] (II) fglrx(0): EDID (in hex): [ 25.529] (II) fglrx(0): 00ffffffffffff00047273adb61a2071 [ 25.529] (II) fglrx(0): 0c11010380261e6b2a6760a25a499e23 [ 25.529] (II) fglrx(0): 135054bfef00818f8180714f7140614f [ 25.529] (II) fglrx(0): 6140454f4540302a009851002a403070 [ 25.529] (II) fglrx(0): 1300782d1100001e000000ff004c3733 [ 25.529] (II) fglrx(0): 3038333039343234370a000000fd0037 [ 25.529] (II) fglrx(0): 4b1e530e000a202020202020000000fc [ 25.529] (II) fglrx(0): 004163657220414c313931370a2000c7 [ 25.529] (II) fglrx(0): End of Display0 EDID data -------------------- [ 25.637] (II) fglrx(0): EDID vendor "ACR", prod id 44403 [ 25.637] (II) fglrx(0): Using EDID range info for horizontal sync [ 25.637] (II) fglrx(0): Using EDID range info for vertical refresh [ 25.637] (II) fglrx(0): Printing DDC gathered Modelines: [ 25.637] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 25.637] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 25.637] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 25.637] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 25.637] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 25.637] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 25.637] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 25.637] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 25.637] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 25.637] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 25.637] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 25.637] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 25.637] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 25.637] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 25.637] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 25.638] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 25.638] (II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) [ 25.638] (II) fglrx(0): Output DFP1 connected [ 25.638] (II) fglrx(0): Output DFP2 disconnected [ 25.638] (II) fglrx(0): Output CRT1 disconnected [ 25.638] (II) fglrx(0): Output CRT2 disconnected [ 25.638] (II) fglrx(0): Using exact sizes for initial modes [ 25.638] (II) fglrx(0): Output DFP1 using initial mode 1280x1024 [ 25.638] (II) fglrx(0): Display dimensions: (380, 300) mm [ 25.638] (II) fglrx(0): DPI set to (86, 86) [ 25.638] (II) fglrx(0): Adapter ATI Radeon HD 4600 Series has 2 configurable heads and 1 displays connected. [ 25.638] (==) fglrx(0): PseudoColor visuals disabled [ 25.638] (II) Loading sub module "ramdac" [ 25.638] (II) LoadModule: "ramdac" [ 25.638] (II) Module "ramdac" already built-in [ 25.638] (==) fglrx(0): NoDRI = NO [ 25.638] (==) fglrx(0): Capabilities: 0x00000000 [ 25.638] (==) fglrx(0): CapabilitiesEx: 0x00000000 [ 25.638] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" [ 25.638] (==) fglrx(0): UseFastTLS=0 [ 25.638] (==) fglrx(0): BlockSignalsOnLock=1 [ 25.638] (--) Depth 24 pixmap format is 32 bpp [ 25.638] (II) Loading extension ATIFGLRXDRI [ 25.638] (II) fglrx(0): doing swlDriScreenInit [ 25.638] (II) fglrx(0): swlDriScreenInit for fglrx driver [ 25.638] ukiDynamicMajor: found major device number 251 [ 25.638] ukiDynamicMajor: found major device number 251 [ 25.638] ukiDynamicMajor: found major device number 251 [ 25.638] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 25.638] ukiOpenDevice: node name is /dev/ati/card0 [ 25.639] ukiOpenDevice: open result is 17, (OK) [ 25.639] ukiOpenByBusid: ukiOpenMinor returns 17 [ 25.639] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 25.639] (II) fglrx(0): [uki] DRM interface version 1.0 [ 25.639] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" [ 25.639] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 [ 25.639] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fd3e77ea000 [ 25.639] (II) fglrx(0): [uki] framebuffer handle = 0x3000 [ 25.639] (II) fglrx(0): [uki] added 1 reserved context for kernel [ 25.639] (II) fglrx(0): swlDriScreenInit done [ 25.639] (II) fglrx(0): Kernel Module Version Information: [ 25.639] (II) fglrx(0): Name: fglrx [ 25.639] (II) fglrx(0): Version: 8.78.30 [ 25.639] (II) fglrx(0): Date: Sep 20 2010 [ 25.639] (II) fglrx(0): Desc: ATI FireGL DRM kernel module [ 25.639] (II) fglrx(0): Kernel Module version matches driver. [ 25.639] (II) fglrx(0): Kernel Module Build Time Information: [ 25.639] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.35-22-generic [ 25.639] (II) fglrx(0): Build-Kernel MODVERSIONS: yes [ 25.639] (II) fglrx(0): Build-Kernel __SMP__: yes [ 25.639] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 [ 25.639] (II) fglrx(0): [uki] register handle = 0x00004000 [ 25.657] (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints [ 25.657] (II) fglrx(0): DRI initialization successfull [ 25.657] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010a8000 [ 25.658] (II) fglrx(0): FBMM initialized for area (0,0)-(1664,2624) [ 25.658] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1664,1664) (front color buffer - assumption) [ 25.658] (II) fglrx(0): Largest offscreen area available: 1664 x 960 [ 25.658] (==) fglrx(0): Backing store disabled [ 25.658] (II) Loading extension FGLRXEXTENSION [ 25.658] (==) fglrx(0): DPMS enabled [ 25.658] (II) fglrx(0): Initialized in-driver Xinerama extension [ 25.658] (**) fglrx(0): Textured Video is enabled. [ 25.658] (II) LoadModule: "glesx" [ 25.658] (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so [ 25.659] (II) Module glesx: vendor="X.Org Foundation" [ 25.659] compiled for 1.8.99.905, module version = 1.0.0 [ 25.659] (II) Loading extension GLESX [ 25.659] (II) fglrx(0): GLESX enableFlags = 528 [ 25.659] (II) fglrx(0): GLESX is enabled [ 25.659] (II) fglrx(0): Acceleration enabled [ 25.659] (II) LoadModule: "amdxmm" [ 25.660] (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so [ 25.660] (II) Module amdxmm: vendor="X.Org Foundation" [ 25.660] compiled for 1.8.99.905, module version = 1.0.0 [ 25.660] (II) Loading extension AMDXVOPL [ 25.661] (II) fglrx(0): UVD2 feature is available [ 25.663] (II) fglrx(0): Enable composite support successfully [ 25.663] (II) fglrx(0): X context handle = 0x1 [ 25.663] (II) fglrx(0): [DRI] installation complete [ 25.663] (==) fglrx(0): Silken mouse enabled [ 25.663] (==) fglrx(0): Using HW cursor of display infrastructure! [ 25.663] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. [ 25.721] (--) RandR disabled [ 25.721] (II) Initializing built-in extension Generic Event Extension [ 25.721] (II) Initializing built-in extension SHAPE [ 25.721] (II) Initializing built-in extension MIT-SHM [ 25.721] (II) Initializing built-in extension XInputExtension [ 25.721] (II) Initializing built-in extension XTEST [ 25.721] (II) Initializing built-in extension BIG-REQUESTS [ 25.721] (II) Initializing built-in extension SYNC [ 25.721] (II) Initializing built-in extension XKEYBOARD [ 25.721] (II) Initializing built-in extension XC-MISC [ 25.721] (II) Initializing built-in extension SECURITY [ 25.721] (II) Initializing built-in extension XINERAMA [ 25.721] (II) Initializing built-in extension XFIXES [ 25.721] (II) Initializing built-in extension RENDER [ 25.721] (II) Initializing built-in extension RANDR [ 25.721] (II) Initializing built-in extension COMPOSITE [ 25.721] (II) Initializing built-in extension DAMAGE [ 25.721] (II) Initializing built-in extension GESTURE [ 25.742] ukiDynamicMajor: found major device number 251 [ 25.742] ukiDynamicMajor: found major device number 251 [ 25.742] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 25.742] ukiOpenDevice: node name is /dev/ati/card0 [ 25.742] ukiOpenDevice: open result is 18, (OK) [ 25.742] ukiOpenByBusid: ukiOpenMinor returns 18 [ 25.742] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 25.824] (II) AIGLX: Loaded and initialized /usr/lib64/dri/fglrx_dri.so [ 25.824] (II) GLX: Initialized DRI GL provider for screen 0 [ 25.824] (II) fglrx(0): Enable the clock gating! [ 25.824] (II) fglrx(0): Setting screen physical size to 338 x 270 [ 25.846] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 25.855] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 25.855] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 25.855] (II) LoadModule: "evdev" [ 25.855] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 25.856] (II) Module evdev: vendor="X.Org Foundation" [ 25.856] compiled for 1.9.0, module version = 2.5.0 [ 25.856] Module class: X.Org XInput Driver [ 25.856] ABI class: X.Org XInput driver, version 11.0 [ 25.856] (**) Power Button: always reports core events [ 25.856] (**) Power Button: Device: "/dev/input/event1" [ 25.856] (--) Power Button: Found keys [ 25.856] (II) Power Button: Configuring as keyboard [ 25.856] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 25.856] (**) Option "xkb_rules" "evdev" [ 25.856] (**) Option "xkb_model" "pc105" [ 25.856] (**) Option "xkb_layout" "us" [ 25.857] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 25.857] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 25.857] (**) Power Button: always reports core events [ 25.857] (**) Power Button: Device: "/dev/input/event0" [ 25.857] (--) Power Button: Found keys [ 25.857] (II) Power Button: Configuring as keyboard [ 25.857] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 25.857] (**) Option "xkb_rules" "evdev" [ 25.857] (**) Option "xkb_model" "pc105" [ 25.857] (**) Option "xkb_layout" "us" [ 25.863] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2) [ 25.863] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 25.864] (**) AT Translated Set 2 keyboard: always reports core events [ 25.864] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2" [ 25.864] (--) AT Translated Set 2 keyboard: Found keys [ 25.864] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 25.864] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 25.864] (**) Option "xkb_rules" "evdev" [ 25.864] (**) Option "xkb_model" "pc105" [ 25.864] (**) Option "xkb_layout" "us" [ 25.864] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event3) [ 25.864] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall" [ 25.864] (**) ImPS/2 Logitech Wheel Mouse: always reports core events [ 25.864] (**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event3" [ 25.864] (--) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons [ 25.864] (--) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s) [ 25.864] (--) ImPS/2 Logitech Wheel Mouse: Found relative axes [ 25.864] (--) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes [ 25.864] (II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse [ 25.864] (**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5 [ 25.864] (**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 25.864] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE) [ 25.864] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1 [ 25.864] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0 [ 25.864] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000 [ 25.864] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4 [ 25.864] (II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes. [ 25.865] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0) [ 25.865] (II) No input driver/identifier specified (ignoring) [ 25.886] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments [ 56.579] (II) Power Button: Close [ 56.579] (II) UnloadModule: "evdev" [ 56.579] (II) Power Button: Close [ 56.579] (II) UnloadModule: "evdev" [ 56.579] (II) AT Translated Set 2 keyboard: Close [ 56.579] (II) UnloadModule: "evdev" [ 56.579] (II) ImPS/2 Logitech Wheel Mouse: Close [ 56.579] (II) UnloadModule: "evdev" [ 56.582] (II) fglrx(0): Shutdown CMMQS [ 56.582] (II) fglrx(0): [uki] removed 1 reserved context for kernel [ 56.582] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0x7fd3e77ea000 [ 56.613] (II) fglrx(0): Interrupt handler Shutdown. [ 56.872] ddxSigGiveUp: Closing log

P.S. А вот и сабж: http://www.hisdigital.com/ru/product2-469.shtml

#86640

После установки squeeze, не запускаются иксы.
Лог Xorg'а:

(WW) RADEON(0): LVDS Info:
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0x7fff7000 is: 0x7fff7000
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x00000000

Xorg.conf:


Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru"
Option "XkbVariant" ","
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Device0"
Driver "radeon"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
# 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz
Modeline "1280x800_60.00" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Device0"
DefaultDepth 24
EndSection

Карточка ATI Radeon Express x1250
Есть ли какие нибудь решения этой проблемы?

Войдите или зарегистрируйтесь, чтобы ответить.