Доброго всем дня,
Купили сервер HP ML150G6, пытаюсь установить на него debian 5.0.5, но после установки не стартуют X - черный экран.
Видеокарта там как я понял Matrox mga g200e, пробовал драйвер vesa, но ни какого толку.
Ставил на обычный PC, делал все тоже самое. Сразу все поднялось.
Пытался Xorg -configure и запускать с /root/xorg.conf.new , но тоже безрезультатно.
в логе ругается на
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from li
st!
Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueTyp
e, removing from list!
(WW) MGA(0): xf86UnMapVidMem: cannot find region for [0xb6aca000,0x7f0000]
FreeFontPath: FPE "/usr/share/fonts/X11/misc" refcount is 2, should be 1; fixing
xorg.cong.new
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/etc/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "xtrap"
Load "GLcore"
Load "dbe"
Load "dri"
Load "glx"
Load "record"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 280 210 # mm
Identifier "Monitor0"
VendorName "VSC"
ModelName "G655"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 120.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "PciRetry" # [<bool>]
#Option "SyncOnGreen" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "Overlay" # [<str>]
#Option "MGASDRAM" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "ColorKey" # <i>
#Option "SetMclk" # <freq>
#Option "OverclockMem" # [<bool>]
#Option "VideoKey" # <i>
#Option "Rotate" # [<str>]
#Option "TexturedVideo" # [<bool>]
#Option "Crtc2Half" # [<bool>]
#Option "Crtc2Ram" # <i>
#Option "Int10" # [<bool>]
#Option "AGPMode" # <i>
#Option "AGPSize" # <i>
#Option "DigitalScreen1" # [<bool>]
#Option "DigitalScreen2" # [<bool>]
#Option "TV" # [<bool>]
#Option "TVStandard" # [<str>]
#Option "CableType" # [<str>]
#Option "NoHal" # [<bool>]
#Option "SwappedHead" # [<bool>]
#Option "DRI" # [<bool>]
#Option "MergedFB" # [<bool>]
#Option "Monitor2HSync" # [<str>]
#Option "Monitor2VRefresh" # [<str>]
#Option "Monitor2Position" # [<str>]
#Option "MetaModes" # [<str>]
#Option "OldDmaInit" # [<bool>]
#Option "ForcePciDma" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "KVM" # [<bool>]
Identifier "Card0"
Driver "mga"
VendorName "Matrox Graphics, Inc."
BoardName "MGA G200e [Pilot] ServerEngines (SEP1)"
BusID "PCI:3:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
(END)
Подскажите пожалуйста куда копать.
