Собственно сабж. Иксы падают молча через 5 сек после запуска chrome
Версия chrome последняя стабильная 32-х битная, скачаная с офсайта в .deb.
zabava@localhost:~$ uname -a
Linux localhost 2.6.32-5-686 #1 SMP Tue Jun 1 04:59:47 UTC 2010 i686 GNU/Linux
только хром? предполагаю что это мультимедия (флеш, хтмл5)
запускаем в окнсоли, смотрим что да как.
смотрим dmesg
смотрим логи иксов.
cat /var/log/Xorg.0.log
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.14-dsa-ia32 i686 Debian
Current Operating System: Linux localhost 2.6.32-5-686 #1 SMP Tue Jun 1 04:59:47 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=f112dbee-0de5-4d1c-9ed9-1d6f1265a24e ro quiet
Build Date: 03 June 2010 04:08:50PM
xorg-server 2:1.7.7-2 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 20 23:35:05 2010
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
Entry deleted from font path.
(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81eac60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 8
(--) PCI:*(0:0:2:0) 8086:2a42:17aa:20e4 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a43:17aa:20e4 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2400000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
(--) intel(0): Chipset: "GM45"
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output HDMI2 has no monitor section
(II) intel(0): Output DP2 has no monitor section
(II) intel(0): Output DP3 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: LEN Model: 4010 Serial#: 0
(II) intel(0): Year: 2007 Week: 1
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 16
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 71.1 MHz Image Size: 261 x 163 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 59.3 MHz Image Size: 261 x 163 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0): B121EW03 V6
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0030ae104000000000
(II) intel(0): 01110103801a1078ea87f594574f8c27
(II) intel(0): 27505400000001010101010101010101
(II) intel(0): 010101010101c61b00a0502017303020
(II) intel(0): 360005a310000018261700a050201730
(II) intel(0): 3020360005a3100000180000000f0081
(II) intel(0): 0a3c810a3214010006af1436000000fe
(II) intel(0): 004231323145573033205636200a00aa
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1280x800"x60.0 71.10 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(II) intel(0): Modeline "1280x800"x50.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): EDID for output HDMI1
(II) intel(0): EDID for output DP1
(II) intel(0): EDID for output HDMI2
(II) intel(0): EDID for output DP2
(II) intel(0): EDID for output DP3
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output HDMI2 disconnected
(II) intel(0): Output DP2 disconnected
(II) intel(0): Output DP3 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/udev: Adding input device Video Bus (/dev/input/event7)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/udev: Adding input device Lid Switch (/dev/input/event2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event3)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event3"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event6)
(**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event6"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found relative axes
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(II) TPPS/2 IBM TrackPoint: initialized for relative axes.
(II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event1)
(**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event1"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.10 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(II) intel(0): Modeline "1280x800"x0.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.10 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(II) intel(0): Modeline "1280x800"x0.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.10 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(II) intel(0): Modeline "1280x800"x0.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz)
dmesg
[ 0.291589] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.291591] system 00:02: ioport range 0x1180-0x11ff has been reserved
[ 0.291594] system 00:02: ioport range 0x800-0x80f has been reserved
[ 0.291597] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.291599] system 00:02: ioport range 0x1600-0x1641 has been reserved
[ 0.291602] system 00:02: ioport range 0x1600-0x161b has been reserved
[ 0.291605] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.291608] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.291611] system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.291614] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.291617] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.291619] system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
[ 0.291622] system 00:02: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.326335] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.326338] pci 0000:00:1c.0: IO window: 0x4000-0x4fff
[ 0.326344] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
[ 0.326349] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
[ 0.326357] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.326361] pci 0000:00:1c.1: IO window: 0x5000-0x5fff
[ 0.326366] pci 0000:00:1c.1: MEM window: 0xf2500000-0xf25fffff
[ 0.326371] pci 0000:00:1c.1: PREFETCH window: 0x00000080400000-0x000000805fffff
[ 0.326379] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.326383] pci 0000:00:1c.2: IO window: 0x2000-0x2fff
[ 0.326388] pci 0000:00:1c.2: MEM window: 0xf2600000-0xf26fffff
[ 0.326393] pci 0000:00:1c.2: PREFETCH window: 0x80600000-0x807fffff
[ 0.326400] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.326404] pci 0000:00:1c.3: IO window: 0x3000-0x3fff
[ 0.326410] pci 0000:00:1c.3: MEM window: 0xf0000000-0xf1ffffff
[ 0.326414] pci 0000:00:1c.3: PREFETCH window: 0x000000f2a00000-0x000000f2afffff
[ 0.326422] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0d
[ 0.326423] pci 0000:00:1e.0: IO window: disabled
[ 0.326429] pci 0000:00:1e.0: MEM window: disabled
[ 0.326433] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.326450] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.326455] pci 0000:00:1c.0: setting latency timer to 64
[ 0.326466] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.326471] pci 0000:00:1c.1: setting latency timer to 64
[ 0.326481] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.326485] pci 0000:00:1c.2: setting latency timer to 64
[ 0.326496] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.326500] pci 0000:00:1c.3: setting latency timer to 64
[ 0.326508] pci 0000:00:1e.0: setting latency timer to 64
[ 0.326512] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.326514] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.326517] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff]
[ 0.326519] pci_bus 0000:02: resource 1 mem: [0x80000000-0x801fffff]
[ 0.326521] pci_bus 0000:02: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.326524] pci_bus 0000:03: resource 0 io: [0x5000-0x5fff]
[ 0.326526] pci_bus 0000:03: resource 1 mem: [0xf2500000-0xf25fffff]
[ 0.326528] pci_bus 0000:03: resource 2 pref mem [0x80400000-0x805fffff]
[ 0.326531] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff]
[ 0.326533] pci_bus 0000:04: resource 1 mem: [0xf2600000-0xf26fffff]
[ 0.326535] pci_bus 0000:04: resource 2 pref mem [0x80600000-0x807fffff]
[ 0.326537] pci_bus 0000:05: resource 0 io: [0x3000-0x3fff]
[ 0.326540] pci_bus 0000:05: resource 1 mem: [0xf0000000-0xf1ffffff]
[ 0.326542] pci_bus 0000:05: resource 2 pref mem [0xf2a00000-0xf2afffff]
[ 0.326544] pci_bus 0000:0d: resource 3 io: [0x00-0xffff]
[ 0.326546] pci_bus 0000:0d: resource 4 mem: [0x000000-0xffffffff]
[ 0.326568] NET: Registered protocol family 2
[ 0.326634] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.326861] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.327178] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.327322] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.327324] TCP reno registered
[ 0.327383] NET: Registered protocol family 1
[ 0.327395] pci 0000:00:02.0: Boot video device
[ 0.327568] Unpacking initramfs...
[ 0.534015] Freeing initrd memory: 8217k freed
[ 0.538229] Simple Boot Flag at 0x35 set to 0x1
[ 0.538500] audit: initializing netlink socket (disabled)
[ 0.538512] type=2000 audit(1279554229.535:1): initialized
[ 0.538691] highmem bounce pool size: 64 pages
[ 0.538695] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.539869] VFS: Disk quotas dquot_6.5.2
[ 0.539924] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.539988] msgmni has been set to 1724
[ 0.540148] alg: No test for stdrng (krng)
[ 0.540188] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.540191] io scheduler noop registered
[ 0.540193] io scheduler anticipatory registered
[ 0.540194] io scheduler deadline registered
[ 0.540223] io scheduler cfq registered (default)
[ 0.540357] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.540369] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.540511] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.540522] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.540665] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.540675] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.540817] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.540827] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.540975] isapnp: Scanning for PnP cards...
[ 0.895146] isapnp: No Plug & Play device found
[ 0.896257] Linux agpgart interface v0.103
[ 0.896318] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 0.897442] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 0.917663] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.917726] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.918064] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.926325] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.926332] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.926378] mice: PS/2 mouse device common for all mice
[ 0.926418] rtc_cmos 00:07: RTC can wake from S4
[ 0.926447] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.926475] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.926484] cpuidle: using governor ladder
[ 0.926485] cpuidle: using governor menu
[ 0.926489] No iBFT detected.
[ 0.926768] TCP cubic registered
[ 0.926887] NET: Registered protocol family 10
[ 0.927243] lo: Disabled Privacy Extensions
[ 0.927490] Mobile IPv6
[ 0.927492] NET: Registered protocol family 17
[ 0.927504] Using IPI No-Shortcut mode
[ 0.927557] PM: Resume from disk failed.
[ 0.927561] registered taskstats version 1
[ 0.928067] rtc_cmos 00:07: setting system clock to 2010-07-19 15:43:50 UTC (1279554230)
[ 0.928138] Initalizing network drop monitor service
[ 0.928156] Freeing unused kernel memory: 372k freed
[ 0.928299] Write protecting the kernel text: 2492k
[ 0.928318] Write protecting the kernel read-only data: 916k
[ 0.933073] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.941079] udev: starting version 158
[ 1.033080] usbcore: registered new interface driver usbfs
[ 1.033123] usbcore: registered new interface driver hub
[ 1.033166] usbcore: registered new device driver usb
[ 1.048909] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.049128] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 1.049153] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.049155] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.049289] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 1.049298] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.049313] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.049317] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.049332] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.049358] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.053249] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.053263] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf2926c00
[ 1.054497] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.054517] SCSI subsystem initialized
[ 1.054874] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.054880] ACPI: Thermal Zone [THM0] (43 C)
[ 1.056446] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.056453] ACPI: Thermal Zone [THM1] (43 C)
[ 1.060512] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.060531] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.060533] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.060536] usb usb1: Product: EHCI Host Controller
[ 1.060538] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.060540] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.060643] usb usb1: configuration #1 chosen from 1 choice
[ 1.060697] hub 1-0:1.0: USB hub found
[ 1.060704] hub 1-0:1.0: 6 ports detected
[ 1.060776] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.060785] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.060890] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 1.071167] libata version 3.00 loaded.
[ 1.172432] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:16:10:7d:55
[ 1.172435] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.172460] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff
[ 1.172744] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 1.172909] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 1.172916] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.172923] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.172926] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.172936] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 1.172970] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 1.173003] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.173005] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.173008] usb usb2: Product: UHCI Host Controller
[ 1.173009] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.173011] usb usb2: SerialNumber: 0000:00:1a.0
[ 1.173069] usb usb2: configuration #1 chosen from 1 choice
[ 1.173093] hub 2-0:1.0: USB hub found
[ 1.173099] hub 2-0:1.0: 2 ports detected
[ 1.173292] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.173429] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.173438] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.173452] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.173455] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.173463] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 1.173487] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.177371] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.177382] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2927000
[ 1.192507] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.192520] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.192522] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.192524] usb usb3: Product: EHCI Host Controller
[ 1.192526] usb usb3: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.192528] usb usb3: SerialNumber: 0000:00:1d.7
[ 1.192582] usb usb3: configuration #1 chosen from 1 choice
[ 1.192606] hub 3-0:1.0: USB hub found
[ 1.192612] hub 3-0:1.0: 6 ports detected
[ 1.192658] ahci 0000:00:1f.2: version 3.0
[ 1.192671] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.192708] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 1.192742] ahci: SSS flag set, parallel bus scan disabled
[ 1.192767] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.192771] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs
[ 1.192776] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.192925] scsi0 : ahci
[ 1.193002] scsi1 : ahci
[ 1.193161] scsi2 : ahci
[ 1.193215] scsi3 : ahci
[ 1.193643] ata1: SATA max UDMA/133 abar m2048@0xf2926000 port 0xf2926100 irq 29
[ 1.193646] ata2: SATA max UDMA/133 abar m2048@0xf2926000 port 0xf2926180 irq 29
[ 1.193648] ata3: DUMMY
[ 1.193650] ata4: DUMMY
[ 1.193679] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.193685] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.193688] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.193696] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.193728] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 1.193758] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.193761] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.193763] usb usb4: Product: UHCI Host Controller
[ 1.193765] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.193767] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.193818] usb usb4: configuration #1 chosen from 1 choice
[ 1.193843] hub 4-0:1.0: USB hub found
[ 1.193851] hub 4-0:1.0: 2 ports detected
[ 1.194048] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 1.194200] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 1.194205] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.194211] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.194214] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.194221] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.194252] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[ 1.194283] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.194285] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.194287] usb usb5: Product: UHCI Host Controller
[ 1.194289] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.194291] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.194339] usb usb5: configuration #1 chosen from 1 choice
[ 1.194364] hub 5-0:1.0: USB hub found
[ 1.194369] hub 5-0:1.0: 2 ports detected
[ 1.194569] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.194719] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.194724] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.194730] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.194733] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.194742] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.194773] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 1.194803] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.194805] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.194807] usb usb6: Product: UHCI Host Controller
[ 1.194809] usb usb6: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.194811] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.194859] usb usb6: configuration #1 chosen from 1 choice
[ 1.194886] hub 6-0:1.0: USB hub found
[ 1.194891] hub 6-0:1.0: 2 ports detected
[ 1.194932] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.194937] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.194941] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.194947] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.194978] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[ 1.195007] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.195009] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.195011] usb usb7: Product: UHCI Host Controller
[ 1.195013] usb usb7: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.195015] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.195063] usb usb7: configuration #1 chosen from 1 choice
[ 1.195088] hub 7-0:1.0: USB hub found
[ 1.195095] hub 7-0:1.0: 2 ports detected
[ 1.195137] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.195143] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.195146] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.195152] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.195182] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 1.195213] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.195215] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.195218] usb usb8: Product: UHCI Host Controller
[ 1.195219] usb usb8: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.195221] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.195268] usb usb8: configuration #1 chosen from 1 choice
[ 1.195293] hub 8-0:1.0: USB hub found
[ 1.195298] hub 8-0:1.0: 2 ports detected
[ 1.512020] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.513078] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.513081] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.513274] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.513277] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.514281] ata1.00: ATA-8: HITACHI HTS543216L9SA00, FB2ZC43C, max UDMA/133
[ 1.514283] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.515500] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.515503] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.515695] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.515698] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.516729] ata1.00: configured for UDMA/133
[ 1.534255] ata1.00: configured for UDMA/133
[ 1.534258] ata1: EH complete
[ 1.534338] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54321 FB2Z PQ: 0 ANSI: 5
[ 1.636007] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 1.808815] usb 4-1: New USB device found, idVendor=08ff, idProduct=2810
[ 1.808818] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.808820] usb 4-1: Product: Fingerprint Sensor
[ 1.808873] usb 4-1: configuration #1 chosen from 1 choice
[ 1.852016] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.873203] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.873245] sd 0:0:0:0: [sda] Write Protect is off
[ 1.873248] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.873266] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.873373] sda: sda1 sda2 < sda5 sda6 >
[ 1.915835] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.238174] PM: Starting manual resume from disk
[ 2.238177] PM: Resume from partition 8:6
[ 2.238178] PM: Checking hibernation image.
[ 2.249027] PM: Error -22 checking image file
[ 2.249028] PM: Resume from disk failed.
[ 2.285585] kjournald starting. Commit interval 5 seconds
[ 2.285591] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.249466] udev: starting version 158
[ 4.613431] Non-volatile memory driver v1.3
[ 4.670552] thinkpad_acpi: ThinkPad ACPI Extras v0.23
[ 4.670555] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 4.670556] thinkpad_acpi: ThinkPad BIOS 6DET33WW (1.10 ), EC 7XHT21WW-1.03
[ 4.670558] thinkpad_acpi: Lenovo ThinkPad X200, model 74553WG
[ 4.670813] thinkpad_acpi: radio switch found; radios are disabled
[ 4.670961] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 4.670964] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 4.674496] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 4.674941] Registered led device: tpacpi::thinklight
[ 4.674964] Registered led device: tpacpi::power
[ 4.674976] Registered led device: tpacpi::standby
[ 4.674987] Registered led device: tpacpi::thinkvantage
[ 4.676903] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 4.677182] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input1
[ 4.797347] ACPI: WMI: Mapper loaded
[ 4.901465] ACPI: Battery Slot [BAT0] (battery present)
[ 4.982890] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 4.983110] ACPI: Lid Switch [LID]
[ 4.983157] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 4.983185] ACPI: Sleep Button [SLPB]
[ 4.983235] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.983256] ACPI: Power Button [PWRF]
[ 5.154238] ACPI: AC Adapter [AC] (on-line)
[ 5.154721] ACPI: SSDT 7cb10c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 5.155286] ACPI: SSDT 7c8e6020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 5.157687] Monitor-Mwait will be used to enter C-1 state
[ 5.157707] Monitor-Mwait will be used to enter C-2 state
[ 5.157724] Monitor-Mwait will be used to enter C-3 state
[ 5.157730] Marking TSC unstable due to TSC halts in idle
[ 5.157755] Switching to clocksource hpet
[ 5.157826] processor LNXCPU:00: registered as cooling_device0
[ 5.158493] ACPI: SSDT 7cb0fca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 5.158845] ACPI: SSDT 7cb0ff20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 5.160289] processor LNXCPU:01: registered as cooling_device1
[ 5.325832] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.760647] cfg80211: Using static regulatory domain info
[ 5.760649] cfg80211: Regulatory domain: US
[ 5.760651] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.760654] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 5.760656] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.760658] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.760661] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.760663] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.760665] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 5.760850] cfg80211: Calling CRDA for country: US
[ 5.812480] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 5.830300] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6
[ 5.967139] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.450598] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 6.450601] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 6.450653] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.450662] iwlagn 0000:03:00.0: setting latency timer to 64
[ 6.450688] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 6.487022] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 6.487095] iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X
[ 6.543313] [drm] Initialized drm 1.1.0 20060810
[ 6.636110] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.715648] i915 0000:00:02.0: power state changed by ACPI to D0
[ 6.715684] i915 0000:00:02.0: power state changed by ACPI to D0
[ 6.715691] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.715694] i915 0000:00:02.0: setting latency timer to 64
[ 6.725679] i915 0000:00:02.0: irq 31 for MSI/MSI-X
[ 6.725686] [drm] set up 31M of stolen space
[ 7.576650] Console: switching to colour frame buffer device 160x50
[ 7.580609] fb0: inteldrmfb frame buffer device
[ 7.580610] registered panic notifier
[ 7.584890] acpi device:01: registered as cooling_device2
[ 7.585187] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 7.585227] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 7.585261] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.585293] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.585316] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.659529] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.659598] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.659644] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.659694] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.494126] Adding 1015800k swap on /dev/sda6. Priority:-1 extents:1 across:1015800k
[ 8.837550] EXT3 FS on sda1, internal journal
[ 8.962481] loop: module loaded
[ 9.901447] kjournald starting. Commit interval 5 seconds
[ 9.901918] EXT3 FS on sda5, internal journal
[ 9.901923] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.140984] fuse init (API version 7.13)
[ 13.425362] Bluetooth: Core ver 2.15
[ 13.425396] NET: Registered protocol family 31
[ 13.425397] Bluetooth: HCI device and connection manager initialized
[ 13.425400] Bluetooth: HCI socket layer initialized
[ 13.489043] Bluetooth: L2CAP ver 2.14
[ 13.489047] Bluetooth: L2CAP socket layer initialized
[ 14.091249] Bluetooth: RFCOMM TTY layer initialized
[ 14.091253] Bluetooth: RFCOMM socket layer initialized
[ 14.091255] Bluetooth: RFCOMM ver 1.11
[ 14.346160] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.346163] Bluetooth: BNEP filters: protocol multicast
[ 14.544544] Bridge firewalling registered
[ 14.994502] Bluetooth: SCO (Voice Link) ver 0.6
[ 14.994508] Bluetooth: SCO socket layer initialized
[ 16.069133] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 16.124203] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 16.124764] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.458746] CPU0 attaching NULL sched-domain.
[ 32.458756] CPU1 attaching NULL sched-domain.
[ 32.504225] CPU0 attaching sched-domain:
[ 32.504233] domain 0: span 0-1 level MC
[ 32.504240] groups: 0 1
[ 32.504251] CPU1 attaching sched-domain:
[ 32.504256] domain 0: span 0-1 level MC
[ 32.504261] groups: 1 0
[ 70.100927] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 70.100935] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 70.101439] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 74.760772] e1000e: eth0 NIC Link is Down
[ 76.464943] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 76.464951] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 80.388104] eth0: no IPv6 routers present
[ 116.750566] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[15814.836061] usb 3-2: new high speed USB device using ehci_hcd and address 2
[15814.981174] usb 3-2: New USB device found, idVendor=0bb4, idProduct=0ff9
[15814.981182] usb 3-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[15814.981189] usb 3-2: Product: Android Phone
[15814.981193] usb 3-2: Manufacturer: HTC
[15814.981198] usb 3-2: SerialNumber: HT99JL904784
[15814.981404] usb 3-2: configuration #1 chosen from 1 choice
[15815.037589] Initializing USB Mass Storage driver...
[15815.037790] scsi4 : SCSI emulation for USB Mass Storage devices
[15815.037965] usbcore: registered new interface driver usb-storage
[15815.037972] USB Mass Storage support registered.
[15815.039084] usb-storage: device found at 2
[15815.039089] usb-storage: waiting for device to settle before scanning
[15820.037269] usb-storage: device scan complete
[15820.039238] scsi 4:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2
[15820.049529] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[42244.324501] usb 3-2: USB disconnect, address 2
zabava@localhost:~$ google-chrome
Убито
как то так
zabavart, это dmesg после загрузки системы, нужет же после попытки запуска хрома.
и ещё, пробуем
rm -Rvf ~/.config/google-chrome/Спасибо, помогло:
rm -Rvf ~/.config/google-chrome/