LinuxForum.Fans
Тема

[Решено] Проблемы с KDE после обновления

Автор: drac753 24 сообщений 6747 просмотров 🔒 закрыта
25.06.2010 10:12 · отредактировано #54510

Собственно обновил полностью систему с помощью aptitude dist-upgrade , вроде прошло всё нормально единственно что после ввода пароля долго грузился рабочий стол и в итоге вместо него белый экран в врерху которого 6 больших красных крестиков. Подскажите в какую сторону копать? обновлялся из тестинга

25.06.2010 10:18 #54511
drac753 написал:
Собственно оновил полностью ситситему с помощью aptitude dist-upgrade , вроде прошло всё нормально единственно что после ввода пароля долго грузился рабочий стол и в итоге вместо него белый экран в врерху которого 6 больших красных крестиков. Подскажите в какую сторону копать? обновлялсе из тестинга

В тестинге нерабочий KDE. Попробуйте подключить sid и обновить из него KDE.

25.06.2010 10:23 · отредактировано #54512

не большое уточнение грузится рабочий стол без иконок вылетает сообщение ошибка kmail, после его закрытия белый экран с крестами

25.06.2010 10:43 #54517

навсякий случай вылаживаю kdm.log

text
*******************************************************************************
Note that your system uses syslog. All of kdm's internally generated messages
(i.e., not from libraries and external programs/scripts it uses) go to the
daemon.* syslog facility; check your syslog configuration to find out to which
file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
********************************************************************************

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.10-dsa-ia32 i686 Debian
Current Operating System: Linux debiantest 2.6.32-3-686 #1 SMP Thu Feb 25 06:14:20 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-686 root=UUID=3198e629-ab6a-426a-8980-5bd4f342d4af ro quiet
Build Date: 23 March 2010  10:07:02PM
xorg-server 2:1.7.6-1 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 11 07:57:19 2010
(==) Using config file: "/etc/X11/xorg.conf"
FATAL: Module fbcon not found.
SELinux: Disabled on system, not enabling in X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server


X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.10-dsa-ia32 i686 Debian
Current Operating System: Linux debiantest 2.6.32-3-686 #1 SMP Thu Feb 25 06:14:20 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-686 root=UUID=3198e629-ab6a-426a-8980-5bd4f342d4af ro quiet
Build Date: 23 March 2010  10:07:02PM
xorg-server 2:1.7.6-1 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu May 13 13:00:24 2010
(==) Using config file: "/etc/X11/xorg.conf"
FATAL: Module fbcon not found.
SELinux: Disabled on system, not enabling in X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server


X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.10-dsa-ia32 i686 Debian
Current Operating System: Linux debiantest 2.6.32-3-686 #1 SMP Thu Feb 25 06:14:20 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-686 root=UUID=3198e629-ab6a-426a-8980-5bd4f342d4af ro quiet
Build Date: 23 March 2010  10:07:02PM
xorg-server 2:1.7.6-1 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed May 19 16:19:01 2010
(==) Using config file: "/etc/X11/xorg.conf"
FATAL: Module fbcon not found.
SELinux: Disabled on system, not enabling in X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server


X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.10-dsa-ia32 i686 Debian
Current Operating System: Linux debiantest 2.6.32-3-686 #1 SMP Thu Feb 25 06:14:20 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-686 root=UUID=3198e629-ab6a-426a-8980-5bd4f342d4af ro quiet
Build Date: 23 March 2010  10:07:02PM
xorg-server 2:1.7.6-1 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed May 26 08:14:15 2010
(==) Using config file: "/etc/X11/xorg.conf"
FATAL: Module fbcon not found.
SELinux: Disabled on system, not enabling in X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server


X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.10-dsa-ia32 i686 Debian
Current Operating System: Linux debiantest 2.6.32-3-686 #1 SMP Thu Feb 25 06:14:20 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-686 root=UUID=3198e629-ab6a-426a-8980-5bd4f342d4af ro quiet
Build Date: 23 March 2010  10:07:02PM
xorg-server 2:1.7.6-1 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed May 26 13:42:46 2010
(==) Using config file: "/etc/X11/xorg.conf"
FATAL: Module fbcon not found.
SELinux: Disabled on system, not enabling in X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server


X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.10-dsa-ia32 i686 Debian
Current Operating System: Linux debiantest 2.6.32-3-686 #1 SMP Thu Feb 25 06:14:20 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-686 root=UUID=3198e629-ab6a-426a-8980-5bd4f342d4af ro quiet
Build Date: 23 March 2010  10:07:02PM
xorg-server 2:1.7.6-1 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed May 26 13:52:57 2010
(==) Using config file: "/etc/X11/xorg.conf"
FATAL: Module fbcon not found.
SELinux: Disabled on system, not enabling in X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server


X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.10-dsa-ia32 i686 Debian
Current Operating System: Linux debiantest 2.6.32-3-686 #1 SMP Thu Feb 25 06:14:20 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-686 root=UUID=3198e629-ab6a-426a-8980-5bd4f342d4af ro quiet
Build Date: 23 March 2010  10:07:02PM
xorg-server 2:1.7.6-1 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri May 28 10:39:11 2010
(==) Using config file: "/etc/X11/xorg.conf"
FATAL: Module fbcon not found.
SELinux: Disabled on system, not enabling in X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server


X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.10-dsa-ia32 i686 Debian
Current Operating System: Linux debiantest 2.6.32-3-686 #1 SMP Thu Feb 25 06:14:20 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-686 root=UUID=3198e629-ab6a-426a-8980-5bd4f342d4af ro quiet
Build Date: 23 March 2010  10:07:02PM
xorg-server 2:1.7.6-1 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May 31 11:04:27 2010
(==) Using config file: "/etc/X11/xorg.conf"
FATAL: Module fbcon not found.
SELinux: Disabled on system, not enabling in X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server


X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.10-dsa-ia32 i686 Debian
Current Operating System: Linux debiantest 2.6.32-3-686 #1 SMP Thu Feb 25 06:14:20 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-686 root=UUID=3198e629-ab6a-426a-8980-5bd4f342d4af ro quiet
Build Date: 23 March 2010  10:07:02PM
xorg-server 2:1.7.6-1 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 25 08:08:03 2010
(==) Using config file: "/etc/X11/xorg.conf"
FATAL: Module fbcon not found.
SELinux: Disabled on system, not enabling in X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server


X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.14-dsa-ia32 i686 Debian
Current Operating System: Linux debiantest 2.6.32-5-686 #1 SMP Tue Jun 1 04:59:47 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=UUID=3198e629-ab6a-426a-8980-5bd4f342d4af ro quiet
Build Date: 03 June 2010  04:08:50PM
xorg-server 2:1.7.7-2 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 25 09:40:08 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
FATAL: Module fbcon not found.
SELinux: Disabled on system, not enabling in X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server


X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.14-dsa-ia32 i686 Debian
Current Operating System: Linux debiantest 2.6.32-3-686 #1 SMP Thu Feb 25 06:14:20 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-686 root=UUID=3198e629-ab6a-426a-8980-5bd4f342d4af ro quiet
Build Date: 03 June 2010  04:08:50PM
xorg-server 2:1.7.7-2 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 25 10:14:12 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) intel(0): [drm] Failed to open DRM device for : No such file or directory
(EE) intel(0): Failed to become DRM master.
(EE) intel(0): Failed to initialize kernel memory manager
SELinux: Disabled on system, not enabling in X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
error setting MTRR (base = 0xc0000000, size = 0x10000000, type = 1) Inappropriate ioctl for device (25)


X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.14-dsa-ia32 i686 Debian
Current Operating System: Linux debiantest 2.6.32-3-686 #1 SMP Thu Feb 25 06:14:20 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-686 root=UUID=3198e629-ab6a-426a-8980-5bd4f342d4af ro quiet
Build Date: 03 June 2010  04:08:50PM
xorg-server 2:1.7.7-2 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 25 10:21:26 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) intel(0): [drm] Failed to open DRM device for : No such file or directory
(EE) intel(0): Failed to become DRM master.
(EE) intel(0): Failed to initialize kernel memory manager
SELinux: Disabled on system, not enabling in X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
error setting MTRR (base = 0xc0000000, size = 0x10000000, type = 1) Inappropriate ioctl for device (25)


X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.14-dsa-ia32 i686 Debian
Current Operating System: Linux debiantest 2.6.32-5-686 #1 SMP Tue Jun 1 04:59:47 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=UUID=3198e629-ab6a-426a-8980-5bd4f342d4af ro quiet
Build Date: 03 June 2010  04:08:50PM
xorg-server 2:1.7.7-2 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 25 10:34:07 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
FATAL: Module fbcon not found.
SELinux: Disabled on system, not enabling in X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
25.06.2010 10:51 #54520

ну и xorg.conf на всякий случай

text
Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/usr/share/fonts/X11/cyrillic"
    FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/Type1"
    FontPath     "/usr/share/fonts/X11/100dpi"
    FontPath     "/usr/share/fonts/X11/75dpi"
    FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath     "built-ins"
EndSection


Section "Module"
    Load  "glx"
    Load  "dri"
    Load  "dri2"
    Load  "dbe"
    Load  "extmod"
    Load  "record"
EndSection


Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection


Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection


Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
     Modeline "1024x768_60.00"  64.11  1024 1080 1184 1344  768 769 772 795  -HSync +Vsync
     
EndSection


Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "ColorKey"               # <i>
        #Option     "CacheLines"             # <i>
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "DRI"                    # [<bool>]
        #Option     "NoDDC"                  # [<bool>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "XvMCSurfaces"           # <i>
        #Option     "PageFlip"               # [<bool>]
    Identifier  "Card0"
    Driver      "intel"
    VendorName  "Intel Corporation"
    BoardName   "82G33/G31 Express Integrated Graphics Controller"
    BusID       "PCI:0:2:0"
EndSection


Section "Extensions" 
    Option "Composite" "Enable"
EndSection


Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection
25.06.2010 12:04 #54533

была такаяже проблема при попытке обновить кеды с тестинка, только кидало сразу в консоль. советую обновить отсюда:

text
deb http://www.debian-desktop.org/pub/linux/debian/kde43 lenny-backports main contrib non-free
deb-src http://www.debian-desktop.org/pub/linux/debian/kde43 lenny-backports main contrib non-free

с этих репов завелся сразу
ЗЫ в одной из прикрепленных тем есть эти ссылки

25.06.2010 14:38 #54551
drac753 написал:
Тоесть в репозитариях коментирую всё, заношу туда
deb http://www.debian-desktop.org/pub/linux/debian/kde43 lenny-backports main contrib non-free
deb-src http://www.debian-desktop.org/pub/linux/debian/kde43 lenny-backports main contrib non-free
и для обновления aptitude upgrade kde-full ?

У Вас установлен Squeeze?
Если да, то совет неуместен. Вышеназванные репозитории для Lenny (стабильного релиза).
Лучше подключите sid (unstable) и обновите KDE оттуда.

25.06.2010 14:46 #54553

У мнея squeeze кеды - все работает, правда с нуля ставил.

25.06.2010 14:50 #54555
Rus написал:
У мнея squeeze кеды - все работает, правда с нуля ставил.

Да их недавно сломали. В рассылках, на днях, обсуждение было.

25.06.2010 15:10 #54567
Rus написал:
[quote=durc]Да их недавно сломали. В рассылках, на днях, обсуждение было.

http://packages.debian.org/search?suite=all&section=all&arch=any&searchon=names&keywords=kdebase пакеты вроде одинаковых версий, может уже перенесли из unstable в testing[/quote]
Вы смотрите в сторону kdebase, а, насколько я помню, речь шла о пакетах с plasma.
Сам КДЕ не пользуюсь, поэтому толком не запоминал. Но помню точно что обновление пакетов из sid'a помогло.

P.s. Да и речь шла именно о белом экране. А это как раз дело плазмы.

25.06.2010 15:20 #54573

Ясно. Спасибо.

25.06.2010 15:43 · отредактировано #54584

Гм насколько я понял всё будет выглядеть примерно так

1)В сорс лист указываем унстайбл репозитарий остальные коментим
deb http://ftp.ru.debian.org/debian/ unstable main contrib non-free
2)выполняем aptitude update
затем aptitude upgrade kde-full
После чего уменя кеды обновятся из testing до unstable
а не возникнет потом проблем с установкой других тестинговых пакетов?
если ошибся поправьте

25.06.2010 15:46 #54587
drac753 написал:
Гм насколько я понял всё будет выглядеть примерно так

1)так в сорс лист указываем унстайбл репозитарий остальные коментим
deb http://ftp.ru.debian.org/debian/ unstable main contrib non-free
2)выполняем aptitude update
затем aptitude upgrade kde-ful

если ошибся поправьте

Все так, только комментить остальные необязательно.
И aptitude upgrade kde-full в том случае, если у Вас именно полный КДЕ установлен.

Проблем с установкой других пакетов не будет. После обновления КДЕ просто закомментируйте строку с нестабильной веткой. и ещё разок
aptitude update

25.06.2010 15:56 #54595

Все так, только комментить остальные необязательно.
И aptitude upgrade kde-full в том случае, если у Вас именно полный КДЕ установлен.

а не возникнет проблем если в одном соурс листе будут ссылки сразу на тестинг и унстайбл версии дистрибутива ?

25.06.2010 15:58 #54598

Проблем с установкой других пакетов не будет. После обновления КДЕ просто закомментируйте строку с нестабильной веткой. и ещё разок
aptitude update

понял спасибо

25.06.2010 15:59 #54600
drac753 написал:
а не возникнет проблем если в одном соурс листе будут ссылки сразу на тестинг и  унстайбл версии дистрибутива ?

если не указать особо, то по умолчанию будет ставиться с sid'a, т.к. там более старшая версия. проблемы всегда могут возникнуть конечно же.

25.06.2010 16:02 #54602
drac753 написал:
Все так, только комментить остальные необязательно.
И aptitude upgrade kde-full в том случае, если у Вас именно полный КДЕ установлен.

а не возникнет проблем если в одном соурс листе будут ссылки сразу на тестинг и унстайбл версии дистрибутива ?

Нет проблем никаких не будет.
Кстати, почему бы не пойти самым простым путём?
Запустите synaptic и сделайте всё в нём.
Обновите сведения о пакетах.
В Разделах выбираете Рабочий стол КДЕ.
Сортируете, что бы сначала шли новые и установленные и отмечаете именно те пакеты КДЕ которые у Вас уже установлены. Их и обновляете.

26.06.2010 10:29 #54744
durc написал:
[quote=Rus]У мнея squeeze кеды - все работает, правда с нуля ставил.

Да их недавно сломали. В рассылках, на днях, обсуждение было.[/quote]
Да не нидавно я уже около месяца сижу на гноме.

Войдите или зарегистрируйтесь, чтобы ответить.