Проблема с установкой драйвера nvidia

10.02.2017 00:25 #420093

Версия моей системы
[console]Linux debian 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08) x86_64 GNU/Linux[/console]
Я удалил драйвер nouveau и сейчас сижу с разрешения 1024x768, пытаюсь установить драйвер nvidia. Вот что показывает lspci -k
[console]VGA compatible controller: NVIDIA Corporation NV43 [GeForce 6600 GT] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 81cf[/console]
Захожу в текстовую консоль и ввожу service lightdm stop, после чего выполняю установку ./NVIDIA-Linux-x86_64-260.19.12.run. Вот лог с ошибкой

text

nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Fri Feb 10 00:05:32 2017
installer version: 260.19.12
PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
option status:
  license pre-accepted               : false
  update                             : false
  force update                       : false
  expert                             : false
  uninstall                          : false
  driver info                        : false
  precompiled interfaces             : true
  no ncurses color                   : false
  query latest version               : false
  no questions                       : false
  silent                             : false
  no recursion                       : false
  no backup                          : false
  kernel module only                 : false
  sanity                             : false
  add this kernel                    : false
  no runlevel check                  : false
  no network                         : false
  no ABI note                        : false
  no RPMs                            : false
  no kernel module                   : false
  force SELinux                      : default
  no X server check                  : false
  no cc version check                : false
  run distro scripts                 : true
  no nouveau check                   : false
  run nvidia-xconfig                 : false
  sigwinch work around               : true
  force tls                          : (not specified)
  force compat32 tls                 : (not specified)
  X install prefix                   : (not specified)
  X library install path             : (not specified)
  X module install path              : (not specified)
  OpenGL install prefix              : (not specified)
  OpenGL install libdir              : (not specified)
  compat32 install chroot            : (not specified)
  compat32 install prefix            : (not specified)
  compat32 install libdir            : (not specified)
  utility install prefix             : (not specified)
  utility install libdir             : (not specified)
  installer prefix                   : (not specified)
  doc install prefix                 : (not specified)
  kernel name                        : (not specified)
  kernel include path                : (not specified)
  kernel source path                 : (not specified)
  kernel output path                 : (not specified)
  kernel install path                : (not specified)
  precompiled kernel interfaces path : (not specified)
  precompiled kernel interfaces url  : (not specified)
  proc mount point                   : /proc
  ui                                 : (not specified)
  tmpdir                             : /tmp
  ftp mirror                         : ftp://download.nvidia.com
  RPM file list                      : (not specified)
  selinux chcon type                 : (not specified)
Using: nvidia-installer ncurses user interface
-> License accepted.
-> Installing NVIDIA driver version 260.19.12.
-> Performing CC sanity check with CC="cc".
-> Performing CC version check with CC="cc".
-> The CC version check failed:
   
   The compiler used to compile the kernel (gcc 4.8) does not exactly match the
   current compiler (gcc 4.9).  The Linux 2.6 kernel module loader rejects kern
   el modules built with a version of gcc that does not exactly match that of t
   he compiler used to build the running kernel.
   
   If you know what you are doing and want to ignore the gcc version check, sel
   ect "No" to continue installation.  Otherwise, select "Yes" to abort install
   ation, set the CC environment variable to the name of the compiler used to c
   ompile your kernel, and restart installation.  Abort now? (Answer: No)
-> Kernel source path: '/lib/modules/3.16.0-4-amd64/source'
-> Kernel output path: '/lib/modules/3.16.0-4-amd64/build'
ERROR: If you are using a Linux 2.4 kernel, please make sure
       you either have configured kernel sources matching your
       kernel or the correct set of kernel headers installed
       on your system.
       
       If you are using a Linux 2.6 kernel, please make sure
       you have configured kernel sources matching your kernel
       installed on your system. If you specified a separate
       output directory using either the "KBUILD_OUTPUT" or
       the "O" KBUILD parameter, make sure to specify this
       directory with the SYSOUT environment variable or with
       the equivalent nvidia-installer command line option.
       
       Depending on where and how the kernel sources (or the
       kernel headers) were installed, you may need to specify
       their location with the SYSSRC environment variable or
       the equivalent nvidia-installer command line option.
ERROR: Installation has failed.  Please see the file
       '/var/log/nvidia-installer.log' for details.  You may find suggestions
       on fixing installation problems in the README available on the Linux
       driver download page at www.nvidia.com.

Файлы headers у меня установлены
[console]ls -l /usr/src/
итого 63772
drwxr-xr-x 4 root root 4096 ноя 2 11:01 linux-headers-3.16.0-4-amd64
drwxr-xr-x 4 root root 4096 ноя 2 11:02 linux-headers-3.16.0-4-common[/console]
При попытке их компиляции выдаёт какие-то бредовые ошибки.
В прошлом логе он указывал что нет файла version.h в папке /lib/modules/3.16.0-4-amd64/build/include/linux/, папки linux не было и я создал её и закинул туда файл из linux-headers как посоветовали мне в интернете. Файл linux-headers-3.16.0-4-common/include/linux/version.h. Вот все файлы с именем version.h в папке
[console]admin$:/usr/src find . -iname version.h
./linux-source-2.6.32/arch/x86/math-emu/version.h
./linux-source-2.6.32/fs/btrfs/version.h
./linux-source-2.6.32/include/xen/interface/version.h
./linux-source-2.6.32/include/sound/version.h
./linux-source-2.6.32/include/linux/dvb/version.h
./linux-source-2.6.32/include/linux/version.h
./linux-source-2.6.32/drivers/net/cxgb3/version.h
./linux-headers-3.16.0-4-amd64/include/config/arch/want/compat/ipc/parse/version.h
./linux-headers-3.16.0-4-amd64/include/generated/uapi/linux/version.h
./linux-headers-3.16.0-4-amd64/include/linux/version.h
./linux-headers-3.16.0-4-common/include/xen/interface/version.h
./linux-headers-3.16.0-4-common/include/uapi/linux/dvb/version.h
./linux-headers-3.16.0-4-common/include/linux/version.h[/console]
Искал в гугле рабочее решение так и не нашёл. Помогите разобратся в проблеме

10.02.2017 00:52 #420095

"Linux-GEEK" написал:
The CC version check failed:

gcc и gcc-c++ установлены, да еще и той версии которой ядро собиралось? ЕМНИП, для ядер 3.хх это gcc-4xx...
Добавлено: 9th Feb 2017 11:52:33 pm

Linux-GEEK, Вот Тыц >>> (шоб без гемороя)

10.02.2017 22:50 #420126

Он до этого предупреждение выдавал что нужен gcc-4.8 а у меня gcc4.9.

"DiabloPC" написал:
Вот Тыц >>> (шоб без гемороя)

Теперь он хочет удалить много нужных мне пакетов
[console]Следующие НОВЫЕ пакеты будут установлены:
dkms{a} gcc-4.9-base:i386{a} glx-alternative-mesa{a} glx-alternative-nvidia{a}
glx-diversions{a} libc6:i386{a} libc6-i686:i386{a} libegl1-nvidia{a}
libgcc1:i386{a} libgl1-nvidia-glx{a} libgl1-nvidia-glx:i386{a}
libgl1-nvidia-glx-i386:i386{a} libgles1-nvidia{a} libgles2-nvidia{a} libjansson4{a}
libnvidia-eglcore{a} libnvidia-ml1{a} libx11-6:i386{a} libxau6:i386{a}
libxcb1:i386{a} libxdmcp6:i386{a} libxext6:i386{a} libxnvctrl0{a}
linux-headers-amd64{a} nvidia-alternative{a} nvidia-driver{a} nvidia-driver-bin{a}
nvidia-glx nvidia-installer-cleanup{a} nvidia-kernel-3.16.0-4-amd64
nvidia-kernel-common{a} nvidia-kernel-dkms nvidia-modprobe{a} nvidia-settings
nvidia-support{a} nvidia-vdpau-driver{a} nvidia-xconfig
xserver-xorg-video-nvidia{a}
Следующие пакеты будут обновлены:
libc6
1 пакетов обновлено, 38 установлено новых, 0 пакетов отмечено для удаления, и 180 пакетов не обновлено.
Необходимо получить 47,4 MB/48,6 MB архивов. После распаковки 215 MB будет занято.
Следующие пакеты имеют неудовлетворённые зависимости:
libc6-i386 : Зависит: libc6 (= 2.19-18+deb8u4) но устанавливается 2.19-18+deb8u7.
libc6-dev : Зависит: libc6 (= 2.19-18+deb8u4) но устанавливается 2.19-18+deb8u7.
libc6-x32 : Зависит: libc6 (= 2.19-18+deb8u4) но устанавливается 2.19-18+deb8u7.
Следующие действия разрешат зависимости:

Удалить следующие пакеты:
1) build-essential
2) comerr-dev
3) g++
4) g++-4.9
5) g++-4.9-multilib
6) g++-multilib
7) gcc-4.9-multilib
8) gcc-multilib
9) krb5-multidev
10) lib32asan1
11) lib32atomic1
12) lib32cilkrts5
13) lib32gcc-4.9-dev
14) lib32gcc1
15) lib32gomp1
16) lib32itm1
17) lib32ncurses5
18) lib32ncurses5-dev
19) lib32quadmath0
20) lib32readline-gplv2-dev
21) lib32readline5
22) lib32stdc++-4.9-dev
23) lib32stdc++6
24) lib32tinfo-dev
25) lib32tinfo5
26) lib32ubsan0
27) lib32z1
28) lib32z1-dev
29) libatk1.0-dev
30) libbluetooth-dev
31) libc6-dev
32) libc6-dev-i386
33) libc6-dev-x32
34) libc6-i386
35) libc6-x32
36) libcaca-dev
37) libcairo2-dev
38) libdirectfb-dev
39) libexpat1-dev
40) libfontconfig1-dev
41) libfreetype6-dev
42) libgdk-pixbuf2.0-dev
43) libgimp2.0-dev
44) libglib2.0-dev
45) libgtk2.0-dev
46) libgudev-1.0-dev
47) libjpeg-dev
48) libjpeg62-turbo-dev
49) libmysqlclient-dev
50) libncurses5-dev
51) libpango1.0-dev
52) libpcre3-dev
53) libpng12-dev
54) libpq-dev
55) libpulse-dev
56) libpython-dev
57) libpython2.7-dev
58) libsdl1.2-dev
59) libslang2-dev
60) libssl-dev
61) libstdc++-4.9-dev
62) libtool
63) libx32asan1
64) libx32atomic1
65) libx32cilkrts5
66) libx32gcc-4.9-dev
67) libx32gcc1
68) libx32gomp1
69) libx32itm1
70) libx32quadmath0
71) libx32stdc++-4.9-dev
72) libx32stdc++6
73) libx32ubsan0
74) libxft-dev
75) python-dev
76) python2.7-dev
77) zlib1g-dev

Оставить следующие зависимости неразрешёнными:
78) libgcc-4.8-dev рекомендует libc6-dev (>= 2.13-5)
79) gcc-4.8 рекомендует libc6-dev (>= 2.13-5)
80) dpkg-dev рекомендует build-essential
81) libgcc-4.9-dev рекомендует libc6-dev (>= 2.13-5)
82) gcc-4.9 рекомендует libc6-dev (>= 2.13-5)
83) gcc рекомендует libc6-dev | libc-dev
84) libltdl-dev рекомендует libtool
85) libpython2.7-dev рекомендует libc6-dev | libc-dev
86) python2.7-dev рекомендует libc6-dev | libc-dev
87) linux-source-2.6.32 рекомендует libc6-dev | libc-dev
88) libc6-dev-i386 рекомендует gcc-multilib

Принять данное решение? [Y/n/q/?]
[/console]

10.02.2017 22:53 #420127

"Linux-GEEK" написал:
Удалить следующие пакеты:
1) build-essential
2) comerr-dev
3) g++
4) g++-4.9
5) g++-4.9-multilib
6) g++-multilib

Хмммм, это что ж получается: 4.9 ему не нравится и оно хочет его снести, но при этом альтернативную версию не устанавливает %) ....

10.02.2017 22:58 #420128

"DiabloPC" написал:
Хмммм, это что ж получается: 4.9 ему не нравится и оно хочет его снести, но при этом альтернативную версию не устанавливает

Тогда щас придётся опять рисковать, а потом наверно вручную устанавливать gcc 4.8

10.02.2017 22:58 #420129

Зы
А почему

"Linux-GEEK" написал:
260.19.12

если для 6600 подходит 304.ххх???

10.02.2017 23:20 #420134

"DiabloPC" написал:
если для 6600 подходит 304.ххх???

Видеокарта старая и на сайте nvidia сказали что версия 260.19.12 подходит. Вот такую ошибку мне выдало.
[console]Настройка пакета

┌──────────────────────┤ Настраивается пакет libgl1-nvidia-glx ├──────────────────────┐
│ │
│ В системе обнаружена графическая карта, которая больше не поддерживается драйвером
│ NVIDIA (пакет nvidia-driver). Вы можете оставить пакет установленным (например,
│ для какой-то другой карты), но карта со следующим набором микросхем работать не
│ будет:
│
│ 05:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV43 [GeForce 6600
│ GT] [10de:0140] (rev a2)
│
│ Для указанной ранее карты требуется несвободный устаревший драйвер NVIDIA (пакет
│ nvidia-legacy-304xx-driver) или свободный драйвер Nouveau (пакет
│ xserver-xorg-video-nouveau).
Перед тем, как использовать драйвер Nouveau, вам нужно удалить настройку NVIDIA из
│ xorg.conf (и xorg.conf.d/).
│
│
│ <Ok>
│ │
└─────────────────────────────────────────────────────────────────────────────────────┘

[/console]
Значит сейчас буду ставить nvidia-legacy-304xx-driver

10.02.2017 23:23 #420136

"Linux-GEEK" написал:
на сайте nvidia сказали

Где тебе такое сказали то?? o_O

http://www.geforce.com/drivers

Выбери там свою карточку и посмотри предложеные версии

11.02.2017 00:19 #420145

"DiabloPC" написал:
Где тебе такое сказали то?

Какой-то сотрудник.

"DiabloPC" написал:
Выбери там свою карточку и посмотри предложеные версии

Установил nvidia-legacy-304xx-driver и он установился без проблем. Но после перезагрузки просто чёрный экран и доступна только текстовая консоль.
Вот lightdm.log

Показать

text

[+0.10s] DEBUG: Logging to /var/log/lightdm.logs/lightdm.log
[+0.10s] DEBUG: Starting Light Display Manager 1.10.3, UID=0 PID=920
[+0.10s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.10s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/01_debian.conf
[+0.10s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.10s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.10s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.10s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.10s] DEBUG: Registered seat module xlocal
[+0.10s] DEBUG: Registered seat module xremote
[+0.10s] DEBUG: Registered seat module unity
[+0.10s] DEBUG: Registered seat module surfaceflinger
[+0.11s] DEBUG: Loading seat Seat:0
[+0.11s] DEBUG: Seat 0: Starting
[+0.11s] DEBUG: Seat 0: Creating user session
[+0.11s] WARNING: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files
[+0.11s] DEBUG: Loading user config from /etc/lightdm/users.conf
[+0.18s] DEBUG: User admin added
[+0.39s] DEBUG: Seat 0: Creating display server of type x
[+0.39s] DEBUG: Could not run plymouth --ping: Failed to execute child process "plymouth" (No such file or directory)
[+0.39s] DEBUG: Using VT 7
[+0.39s] DEBUG: Seat 0: Starting local X display on VT 7
[+0.39s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm.logs/x-0.log
[+0.43s] DEBUG: DisplayServer x-0: Writing X server authority to /var/run/lightdm/root/:0
[+0.43s] DEBUG: DisplayServer x-0: Launching X Server
[+0.43s] DEBUG: Launching process 946: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.43s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0
[+0.43s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.43s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+7.13s] DEBUG: Process 946 exited with return value 1
[+7.13s] DEBUG: DisplayServer x-0: X server stopped
[+7.13s] DEBUG: Releasing VT 7
[+7.13s] DEBUG: DisplayServer x-0: Removing X server authority /var/run/lightdm/root/:0
[+7.13s] DEBUG: Seat 0: Display server stopped
[+7.13s] DEBUG: Seat 0: Stopping session
[+7.13s] DEBUG: Seat 0: Session stopped
[+7.13s] DEBUG: Seat 0: Stopping display server, no sessions require it
[+7.13s] DEBUG: Seat 0: Active display server stopped, starting greeter
[+7.13s] DEBUG: Seat 0: Creating greeter session
[+7.26s] DEBUG: Seat 0: Creating display server of type x
[+7.26s] DEBUG: Using VT 7
[+7.26s] DEBUG: Seat 0: Starting local X display on VT 7
[+7.26s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm.logs/x-0.log
[+7.26s] DEBUG: DisplayServer x-0: Writing X server authority to /var/run/lightdm/root/:0
[+7.26s] DEBUG: DisplayServer x-0: Launching X Server
[+7.26s] DEBUG: Launching process 994: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+7.26s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0
[+7.31s] DEBUG: Process 994 exited with return value 1
[+7.31s] DEBUG: DisplayServer x-0: X server stopped
[+7.31s] DEBUG: Releasing VT 7
[+7.31s] DEBUG: DisplayServer x-0: Removing X server authority /var/run/lightdm/root/:0
[+7.31s] DEBUG: Seat 0: Display server stopped
[+7.31s] DEBUG: Seat 0: Stopping; greeter display server failed to start
[+7.31s] DEBUG: Seat 0: Stopping
[+7.31s] DEBUG: Seat 0: Stopping session
[+7.31s] DEBUG: Seat 0: Session stopped
[+7.31s] DEBUG: Seat 0: Stopped
[+7.31s] DEBUG: Seat 0: Stopping session

Не может дисплей определить.
Вот x-0.log

Показать

text


X.Org X Server 1.16.4
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
Current Operating System: Linux debian 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08) x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=aa6e9ea5-145f-4cc9-ba28-cbe89e8704db ro
Build Date: 11 February 2015  12:32:02AM
xorg-server 2:1.16.4-1 (http://www.debian.org/support) 
Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 10 23:36:56 2017
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
vesa: Ignoring device with a bound kernel driver
(EE) 
Fatal server error:
(EE) no screens found(EE) 
(EE) 
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(EE) 
(EE) Server terminated with error (1). Closing log file.

lspci -k пишет что у видокарты драйвер nvidia. Потом создал файл xorg.conf но всё равно всё безуспешно. xrandr пишет что не найден монитор. Но теперь даже nouveau не включается, получилось восстановится только разрешение экрана максимально доступное 1024x768. Сейчас опять система без драйвера. Хотя стоит пакет xserver-xorg-video-nouveau и по инструкции с сайта debian всё должно работать. Сейчас наверно буду на другой дистрибутив переходить, debian очень глючит на моём компьютере

11.02.2017 00:32 #420146

"Linux-GEEK" написал:
Сейчас наверно буду на другой дистрибутив переходить

Тише ты, зачЭм гарячку пороть то?
Добавлено: 10th Feb 2017 11:26:31 pm

Вопервых - нуво в блэклист, во вторых в строку параметров ядра добавь nomodesetting

"Linux-GEEK" написал:
(==) Using system config directory "/usr/share/X11/xorg.conf.d
vesa: Ignoring device with a bound kernel driver"

в третьих создай нормальный xorg.conf
(вот в качестве примера openSUSE 13.2 NVIDIA )

ЗЫ
Логи и длинный вывод консоли пихай в спойлеры) предыдущее сообщение я поправил...
Добавлено: 10th Feb 2017 11:32:45 pm

"Linux-GEEK" написал:
debian очень глючит на моём компьютере

Дэб не глючит, глючат поспешные действия с ним.... С другим дистром может все пойти еще хуже, из тех, которыми мне доводилось пользоваться, как раз дэб бил самым устойчивым к разного рода косякам и в самых критических случаях возможностей исправления этих косяков было больше чем у ругих....

11.02.2017 00:44 · отредактировано #420149

"DiabloPC" написал:
ише ты, зачЭм гарячку пороть то?

Уже 10 дней как хочу сменить, ищу дистрибутив с наименьшими багами

"DiabloPC" написал:
в третьих создай нормальный xorg.conf

Вот мой старый xorg.conf

Показать

text

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 340.46  (buildd@brahms)  Tue Oct  7 08:00:32 UTC 2014
Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection
Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection
Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA corporation"
EndSection
Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

"DiabloPC" написал:
и в самых критических случаях возможностей исправления этих косяков было больше чем у ругих....

Меня больше всего выводят постоянные ошибки сегментирования, не дают нормально скомплимировать код. Памяти 1024 МБ слишком мало для debian.

"DiabloPC" написал:
nomodesetting

Сейчас перезагружу и ещё раз попробую

11.02.2017 00:49 #420150

"Linux-GEEK" написал:
Памяти 1024 МБ слишком мало для debian.

Мало не для debian, а для поставленых задач.... А от дистра здесь мало что зависит...

"Linux-GEEK" написал:
постоянные ошибки сегментирования

Это где они у тебя возникают?... С железом точно все норально?...

"Linux-GEEK" написал:
Вот мой старый xorg.conf

Да он его банально не видит, оно ж пытается тащить конфиг из /usr/share/X11/xorg.conf.d, хотя в первую очередь должно тащить /etc/X11/xorg.conf, затем /etc/X11/xorg.conf.d/ и только потом /usr/share/X11/xorg.conf.d

11.02.2017 01:11 · отредактировано #420154

"DiabloPC" написал:
С железом точно все норально?...

Железо хорошее и проверенное временем. Возникают когда пытаюсь скомплимировать что-нибудь тяжёлое , например ядро. Приходится по тысяче раз вводить make.

"DiabloPC" написал:
Да он его банально не видит

Конфиг всегда по этому пути /etc/X11/xorg.conf. Когда удаляю его и перезапускаю lightdm всё возвращается на свои места.
Я нашёл причину в логах

Показать

text

[   209.912] 
X.Org X Server 1.16.4
Release Date: 2014-12-20
[   209.912] X Protocol Version 11, Revision 0
[   209.912] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[   209.912] Current Operating System: Linux debian 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08) x86_64
[   209.912] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=aa6e9ea5-145f-4cc9-ba28-cbe89e8704db ro
[   209.912] Build Date: 11 February 2015  12:32:02AM
[   209.912] xorg-server 2:1.16.4-1 (http://www.debian.org/support) 
[   209.912] Current version of pixman: 0.32.6
[   209.912]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   209.912] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   209.912] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 11 00:52:15 2017
[   209.912] (==) Using config file: "/etc/X11/xorg.conf"
[   209.912] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   209.912] (==) ServerLayout "Layout0"
[   209.912] (**) |-->Screen "Screen0" (0)
[   209.912] (**) |   |-->Monitor "Monitor0"
[   209.913] (**) |   |-->Device "Device0"
[   209.913] (**) |-->Input Device "Keyboard0"
[   209.913] (**) |-->Input Device "Mouse0"
[   209.913] (==) Automatically adding devices
[   209.913] (==) Automatically enabling devices
[   209.913] (==) Automatically adding GPU devices
[   209.913] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   209.913]     Entry deleted from font path.
[   209.913] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[   209.913] (==) ModulePath set to "/usr/lib/xorg/modules"
[   209.913] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   209.913] (WW) Disabling Keyboard0
[   209.913] (WW) Disabling Mouse0
[   209.913] (II) Loader magic: 0x7f29ab16ed80
[   209.913] (II) Module ABI versions:
[   209.913]     X.Org ANSI C Emulation: 0.4
[   209.913]     X.Org Video Driver: 18.0
[   209.913]     X.Org XInput driver : 21.0
[   209.913]     X.Org Server Extension : 8.0
[   209.913] (II) xfree86: Adding drm device (/dev/dri/card0)
[   209.914] (--) PCI:*(0:5:0:0) 10de:0140:1043:81cf rev 162, Mem @ 0xf4000000/67108864, 0xd0000000/268435456, 0xfa000000/16777216, BIOS @ 0x????????/131072
[   209.914] (II) LoadModule: "glx"
[   209.914] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   209.916] (II) Module glx: vendor="X.Org Foundation"
[   209.916]     compiled for 1.16.4, module version = 1.0.0
[   209.916]     ABI class: X.Org Server Extension, version 8.0
[   209.916] (==) AIGLX enabled
[   209.916] (II) LoadModule: "nvidia"
[   209.916] (WW) Warning, couldn't open module nvidia
[   209.916] (II) UnloadModule: "nvidia"
[   209.916] (II) Unloading nvidia
[   209.916] (EE) Failed to load module "nvidia" (module does not exist, 0)
[   209.917] (EE) No drivers available.
[   209.917] (EE) 
Fatal server error:
[   209.917] (EE) no screens found(EE) 
[   209.917] (EE) 
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
[   209.917] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   209.917] (EE)

Failed to load module "nvidia" - он его даже загрузить не может.
Вот ещё лог

Показать

text

[   393.959] 
X.Org X Server 1.16.4
Release Date: 2014-12-20
[   393.959] X Protocol Version 11, Revision 0
[   393.959] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[   393.959] Current Operating System: Linux debian 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08) x86_64
[   393.959] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=aa6e9ea5-145f-4cc9-ba28-cbe89e8704db ro
[   393.959] Build Date: 11 February 2015  12:32:02AM
[   393.959] xorg-server 2:1.16.4-1 (http://www.debian.org/support) 
[   393.959] Current version of pixman: 0.32.6
[   393.960]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   393.960] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   393.961] (==) Log file: "/var/log/Xorg.1.log", Time: Fri Feb 10 23:25:05 2017
[   393.961] (II) Loader magic: 0x7fdaa2ea1d80
[   393.961] (II) Module ABI versions:
[   393.961]     X.Org ANSI C Emulation: 0.4
[   393.961]     X.Org Video Driver: 18.0
[   393.961]     X.Org XInput driver : 21.0
[   393.961]     X.Org Server Extension : 8.0
[   393.962] (--) PCI:*(0:5:0:0) 10de:0140:1043:81cf rev 162, Mem @ 0xf4000000/67108864, 0xd0000000/268435456, 0xfa000000/16777216, BIOS @ 0x????????/131072
[   393.962] List of video drivers:
[   393.962]     trident
[   393.962]     intel
[   393.962]     vmware
[   393.963]     neomagic
[   393.963]     mga
[   393.963]     sisusb
[   393.963]     qxl
[   393.963]     savage
[   393.963]     nvidia
[   393.963]     siliconmotion
[   393.963]     openchrome
[   393.963]     r128
[   393.964]     mach64
[   393.964]     tdfx
[   393.964]     cirrus
[   393.964]     radeon
[   393.964]     nouveau
[   393.964]     ati
[   393.965]     vesa
[   393.965]     fbdev
[   393.965]     modesetting
[   393.965] (II) LoadModule: "trident"
[   393.965] (II) Loading /usr/lib/xorg/modules/drivers/trident_drv.so
[   393.965] (II) Module trident: vendor="X.Org Foundation"
[   393.965]     compiled for 1.15.99.904, module version = 1.3.6
[   393.965]     Module class: X.Org Video Driver
[   393.965]     ABI class: X.Org Video Driver, version 18.0
[   393.965] (II) LoadModule: "intel"
[   393.965] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   393.966] (II) Module intel: vendor="X.Org Foundation"
[   393.966]     compiled for 1.15.99.904, module version = 2.21.15
[   393.966]     Module class: X.Org Video Driver
[   393.966]     ABI class: X.Org Video Driver, version 18.0
[   393.966] (II) LoadModule: "vmware"
[   393.972] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[   393.985] (II) Module vmware: vendor="X.Org Foundation"
[   393.985]     compiled for 1.16.4, module version = 13.0.2
[   393.985]     Module class: X.Org Video Driver
[   393.985]     ABI class: X.Org Video Driver, version 18.0
[   393.985] (II) LoadModule: "neomagic"
[   393.986] (II) Loading /usr/lib/xorg/modules/drivers/neomagic_drv.so
[   393.986] (II) Module neomagic: vendor="X.Org Foundation"
[   393.986]     compiled for 1.15.99.904, module version = 1.2.8
[   393.986]     Module class: X.Org Video Driver
[   393.986]     ABI class: X.Org Video Driver, version 18.0
[   393.986] (II) LoadModule: "mga"
[   393.986] (II) Loading /usr/lib/xorg/modules/drivers/mga_drv.so
[   393.986] (II) Module mga: vendor="X.Org Foundation"
[   393.986]     compiled for 1.15.99.904, module version = 1.6.3
[   393.986]     Module class: X.Org Video Driver
[   393.986]     ABI class: X.Org Video Driver, version 18.0
[   393.986] (II) LoadModule: "sisusb"
[   393.986] (II) Loading /usr/lib/xorg/modules/drivers/sisusb_drv.so
[   393.986] (II) Module sisusb: vendor="X.Org Foundation"
[   393.986]     compiled for 1.15.99.904, module version = 0.9.6
[   393.986]     Module class: X.Org Video Driver
[   393.986]     ABI class: X.Org Video Driver, version 18.0
[   393.986] (II) LoadModule: "qxl"
[   393.986] (II) Loading /usr/lib/xorg/modules/drivers/qxl_drv.so
[   393.987] (II) Module qxl: vendor="X.Org Foundation"
[   393.987]     compiled for 1.15.99.904, module version = 0.1.1
[   393.987]     Module class: X.Org Video Driver
[   393.987]     ABI class: X.Org Video Driver, version 18.0
[   393.987] (II) LoadModule: "savage"
[   393.987] (II) Loading /usr/lib/xorg/modules/drivers/savage_drv.so
[   393.987] (II) Module savage: vendor="X.Org Foundation"
[   393.987]     compiled for 1.15.99.904, module version = 2.3.7
[   393.987]     Module class: X.Org Video Driver
[   393.987]     ABI class: X.Org Video Driver, version 18.0
[   393.987] (II) LoadModule: "nvidia"
[   393.987] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   393.988] (II) Module nvidia: vendor="NVIDIA Corporation"
[   393.988]     compiled for 4.0.2, module version = 1.0.0
[   393.988]     Module class: X.Org Video Driver
[   393.988] (II) LoadModule: "siliconmotion"
[   393.988] (II) Loading /usr/lib/xorg/modules/drivers/siliconmotion_drv.so
[   393.988] (II) Module siliconmotion: vendor="X.Org Foundation"
[   393.988]     compiled for 1.15.99.904, module version = 1.7.7
[   393.988]     Module class: X.Org Video Driver
[   393.988]     ABI class: X.Org Video Driver, version 18.0
[   393.988] (II) LoadModule: "openchrome"
[   393.989] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
[   393.989] (II) Module openchrome: vendor="http://openchrome.org/"
[   393.989]     compiled for 1.15.99.904, module version = 0.3.3
[   393.989]     Module class: X.Org Video Driver
[   393.989]     ABI class: X.Org Video Driver, version 18.0
[   393.989] (II) LoadModule: "r128"
[   393.989] (II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
[   393.989] (II) Module r128: vendor="X.Org Foundation"
[   393.989]     compiled for 1.15.99.904, module version = 6.9.2
[   393.989]     Module class: X.Org Video Driver
[   393.989]     ABI class: X.Org Video Driver, version 18.0
[   393.989] (II) LoadModule: "mach64"
[   393.989] (II) Loading /usr/lib/xorg/modules/drivers/mach64_drv.so
[   393.989] (II) Module mach64: vendor="X.Org Foundation"
[   393.989]     compiled for 1.16.1, module version = 6.9.4
[   393.989]     Module class: X.Org Video Driver
[   393.989]     ABI class: X.Org Video Driver, version 18.0
[   393.989] (II) LoadModule: "tdfx"
[   393.990] (II) Loading /usr/lib/xorg/modules/drivers/tdfx_drv.so
[   393.990] (II) Module tdfx: vendor="X.Org Foundation"
[   393.990]     compiled for 1.15.99.904, module version = 1.4.5
[   393.990]     Module class: X.Org Video Driver
[   393.990]     ABI class: X.Org Video Driver, version 18.0
[   393.990] (II) LoadModule: "cirrus"
[   393.990] (II) Loading /usr/lib/xorg/modules/drivers/cirrus_drv.so
[   393.990] (II) Module cirrus: vendor="X.Org Foundation"
[   393.990]     compiled for 1.15.99.904, module version = 1.5.2
[   393.990]     Module class: X.Org Video Driver
[   393.990]     ABI class: X.Org Video Driver, version 18.0
[   393.990] (II) LoadModule: "radeon"
[   393.990] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[   393.990] (II) Module radeon: vendor="X.Org Foundation"
[   393.990]     compiled for 1.16.1, module version = 7.5.0
[   393.990]     Module class: X.Org Video Driver
[   393.990]     ABI class: X.Org Video Driver, version 18.0
[   393.990] (II) LoadModule: "nouveau"
[   393.991] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[   393.991] (II) Module nouveau: vendor="X.Org Foundation"
[   393.991]     compiled for 1.16.0, module version = 1.0.11
[   393.991]     Module class: X.Org Video Driver
[   393.991]     ABI class: X.Org Video Driver, version 18.0
[   393.991] (II) LoadModule: "ati"
[   393.991] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[   393.991] (II) Module ati: vendor="X.Org Foundation"
[   393.991]     compiled for 1.16.1, module version = 7.5.0
[   393.991]     Module class: X.Org Video Driver
[   393.991]     ABI class: X.Org Video Driver, version 18.0
[   393.991] (II) LoadModule: "vesa"
[   393.991] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   393.991] (II) Module vesa: vendor="X.Org Foundation"
[   393.991]     compiled for 1.15.99.904, module version = 2.3.3
[   393.991]     Module class: X.Org Video Driver
[   393.991]     ABI class: X.Org Video Driver, version 18.0
[   393.991] (II) LoadModule: "fbdev"
[   393.992] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   393.992] (II) Module fbdev: vendor="X.Org Foundation"
[   393.992]     compiled for 1.15.99.904, module version = 0.4.4
[   393.992]     Module class: X.Org Video Driver
[   393.992]     ABI class: X.Org Video Driver, version 18.0
[   393.992] (II) LoadModule: "modesetting"
[   393.992] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   393.992] (II) Module modesetting: vendor="X.Org Foundation"
[   393.992]     compiled for 1.16.4, module version = 0.9.0
[   393.992]     Module class: X.Org Video Driver
[   393.992]     ABI class: X.Org Video Driver, version 18.0
[   393.992] (WW) Falling back to old probe method for trident
[   393.992] (WW) Falling back to old probe method for neomagic
[   393.992] (WW) Falling back to old probe method for sisusb
[   393.992] (II) NVIDIA dlloader X Driver  340.101  Thu Dec  1 14:50:13 PST 2016
[   393.992] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   393.992] (WW) Falling back to old probe method for siliconmotion
[   393.992] (WW) Falling back to old probe method for cirrus
[   393.992] (II) Loading sub module "cirrus_laguna"
[   393.992] (II) LoadModule: "cirrus_laguna"
[   393.992] (II) Loading /usr/lib/xorg/modules/drivers/cirrus_laguna.so
[   393.992] (II) Module cirrus_laguna: vendor="X.Org Foundation"
[   393.992]     compiled for 1.15.99.904, module version = 1.0.0
[   393.992]     ABI class: X.Org Video Driver, version 18.0
[   393.992] (II) Loading sub module "cirrus_alpine"
[   393.993] (II) LoadModule: "cirrus_alpine"
[   393.993] (II) Loading /usr/lib/xorg/modules/drivers/cirrus_alpine.so
[   393.993] (II) Module cirrus_alpine: vendor="X.Org Foundation"
[   393.993]     compiled for 1.15.99.904, module version = 1.0.0
[   393.993]     ABI class: X.Org Video Driver, version 18.0
[   393.993] (II) NOUVEAU driver Date:   Thu Aug 28 03:57:48 2014 +0200
[   393.993] (II) NOUVEAU driver for NVIDIA chipset families :
[   393.993]     RIVA TNT        (NV04)
[   393.993]     RIVA TNT2       (NV05)
[   393.993]     GeForce 256     (NV10)
[   393.993]     GeForce 2       (NV11, NV15)
[   393.993]     GeForce 4MX     (NV17, NV18)
[   393.993]     GeForce 3       (NV20)
[   393.993]     GeForce 4Ti     (NV25, NV28)
[   393.993]     GeForce FX      (NV3x)
[   393.993]     GeForce 6       (NV4x)
[   393.993]     GeForce 7       (G7x)
[   393.993]     GeForce 8       (G8x)
[   393.993]     GeForce GTX 200 (NVA0)
[   393.993]     GeForce GTX 400 (NVC0)
[   393.993] (II) VESA: driver for VESA chipsets: vesa
[   393.993] (II) FBDEV: driver for framebuffer: fbdev
[   393.993] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   393.994] (++) Using config file: "/root/xorg.conf.new"
[   393.994] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   393.994] (==) ServerLayout "X.org Configured"
[   393.994] (**) |-->Screen "Screen0" (0)
[   393.994] (**) |   |-->Monitor "Monitor0"
[   393.995] (**) |   |-->Device "Card0"
[   393.995] (**) |-->Input Device "Mouse0"
[   393.995] (**) |-->Input Device "Keyboard0"
[   393.995] (==) Automatically adding devices
[   393.995] (==) Automatically enabling devices
[   393.995] (==) Automatically adding GPU devices
[   393.995] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   393.995]     Entry deleted from font path.
[   393.995] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   393.995]     Entry deleted from font path.
[   393.995] (**) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins,
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[   393.995] (**) ModulePath set to "/usr/lib/xorg/modules"
[   393.995] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   393.995] (WW) Disabling Mouse0
[   393.995] (WW) Disabling Keyboard0
[   393.995] (II) Loading sub module "fb"
[   393.995] (II) LoadModule: "fb"
[   393.995] (II) Loading /usr/lib/xorg/modules/libfb.so
[   393.995] (II) Module fb: vendor="X.Org Foundation"
[   393.995]     compiled for 1.16.4, module version = 1.0.0
[   393.995]     ABI class: X.Org ANSI C Emulation, version 0.4
[   393.995] (WW) Unresolved symbol: fbGetGCPrivateKey
[   393.995] (II) Loading sub module "wfb"
[   393.995] (II) LoadModule: "wfb"
[   393.995] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   393.995] (II) Module wfb: vendor="X.Org Foundation"
[   393.995]     compiled for 1.16.4, module version = 1.0.0
[   393.995]     ABI class: X.Org ANSI C Emulation, version 0.4
[   393.996] (II) Loading sub module "ramdac"
[   393.996] (II) LoadModule: "ramdac"
[   393.996] (II) Module "ramdac" already built-in
[   393.996] (WW) NVIDIA(0): The NVIDIA GeForce 6600 GT GPU installed in this system is
[   393.996] (WW) NVIDIA(0):     supported through the NVIDIA 304.xx Legacy drivers. Please
[   393.996] (WW) NVIDIA(0):     visit http://www.nvidia.com/object/unix.html for more
[   393.996] (WW) NVIDIA(0):     information.  The 340.101 NVIDIA driver will ignore this
[   393.996] (WW) NVIDIA(0):     GPU.  Continuing probe... 
[   393.996] Number of created screens does not match number of detected devices.
  Configuration failed.

В остальных логах никаких ошибок связанных с nvidia нету.
Вот что даёт команда modprobe nvidia
[console]modprobe nvidia
insmod /lib/modules/3.16.0-4-amd64/nvidia/nvidia-current.ko NVreg_DeviceFileUID=0 NVreg_DeviceFileGID=44 NVreg_DeviceFileMode=0660[/console]

11.02.2017 01:16 #420156

Linux-GEEK, а что говорит
[console=root]modinfo /lib/modules/3.16.0-4-amd64/nvidia/nvidia-current.ko[/console]?

11.02.2017 01:20 #420158

А что в dmesg?

11.02.2017 01:37 #420166

"DiabloPC" написал:
modinfo /lib/modules/3.16.0-4-amd64/nvidia/nvidia-current.ko

Пишет что версия 340.101 хотя я уже её удалил.
[console]filename: /lib/modules/3.16.0-4-amd64/nvidia/nvidia-current.ko
alias: char-major-195-*
version: 340.101
supported: external
license: NVIDIA
alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
alias: pci:v000010DEd*sv*sd*bc03sc02i00*
alias: pci:v000010DEd*sv*sd*bc03sc00i00*
depends: drm,i2c-core
vermagic: 3.16.0-4-amd64 SMP mod_unload modversions
parm: NVreg_Mobile:int
parm: NVreg_ResmanDebugLevel:int
parm: NVreg_RmLogonRC:int
parm: NVreg_ModifyDeviceFiles:int
parm: NVreg_DeviceFileUID:int
parm: NVreg_DeviceFileGID:int
parm: NVreg_DeviceFileMode:int
parm: NVreg_RemapLimit:int
parm: NVreg_UpdateMemoryTypes:int
parm: NVreg_InitializeSystemMemoryAllocations:int
parm: NVreg_UsePageAttributeTable:int
parm: NVreg_MapRegistersEarly:int
parm: NVreg_RegisterForACPIEvents:int
parm: NVreg_CheckPCIConfigSpace:int
parm: NVreg_EnablePCIeGen3:int
parm: NVreg_EnableMSI:int
parm: NVreg_MemoryPoolSize:int
parm: NVreg_RegistryDwords:charp
parm: NVreg_RmMsg:charp
parm: NVreg_AssignGpus:charp[/console]

11.02.2017 01:37 #420167

"Linux-GEEK" написал:
Пишет что версия 340.101 хотя я уже её удалил.

Значит не удалил

11.02.2017 01:39 #420168

"yars" написал:
А что в dmesg?

Показать

[console][ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=aa6e9ea5-145f-4cc9-ba28-cbe89e8704db ro
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003fff3000-0x000000003fffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 0.2 present.
[ 0.000000] DMI: /NF-CK804, BIOS 6.00 PG 03/06/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f3af0-0x000f3aff] mapped at [ffff8800000f3af0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3fc00000-0x3fdfffff]
[ 0.000000] [mem 0x3fc00000-0x3fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x3c000000-0x3fbfffff]
[ 0.000000] [mem 0x3c000000-0x3fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x3bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x3fe00000-0x3ffeffff]
[ 0.000000] [mem 0x3fe00000-0x3ffeffff] page 4k
[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37400000-0x379f7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7CA0 000014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 0x000000003FFF3040 000034 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x000000003FFF30C0 000074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 0x000000003FFF3180 00633D (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x000000003FFF0000 000040
[ 0.000000] ACPI: SRAT 0x000000003FFF95C0 000090 (v01 AMD HAMMER 00000001 AMD 00000001)
[ 0.000000] ACPI: MCFG 0x000000003FFF96C0 00003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 0x000000003FFF9500 000072 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x3fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x3ffeffff] -> [mem 0x00000000-0x3ffeffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3ffeffff]
[ 0.000000] NODE_DATA [mem 0x3ffeb000-0x3ffeffff]
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x3ffeffff]
[ 0.000000] On node 0 totalpages: 262028
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3528 pages used for memmap
[ 0.000000] DMA32 zone: 258032 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88003fc00000 s80896 r8192 d21504 u1048576
[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258423
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=aa6e9ea5-145f-4cc9-ba28-cbe89e8704db ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x4050000000-0x4051ffffff] (32MB)
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 1015852K/1048112K available (5222K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 32260K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2200.170 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.008052] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.34 BogoMIPS (lpj=8800680)
[ 0.008127] pid_max: default: 32768 minimum: 301
[ 0.008175] ACPI: Core revision 20140424
[ 0.016060] ACPI: All ACPI Tables successfully acquired
[ 0.016185] Security Framework initialized
[ 0.016234] AppArmor: AppArmor disabled by boot time parameter
[ 0.016273] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.016424] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.017047] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.017379] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.017423] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.017784] Initializing cgroup subsys memory
[ 0.017827] Initializing cgroup subsys devices
[ 0.017873] Initializing cgroup subsys freezer
[ 0.017912] Initializing cgroup subsys net_cls
[ 0.017954] Initializing cgroup subsys blkio
[ 0.017995] Initializing cgroup subsys perf_event
[ 0.018033] Initializing cgroup subsys net_prio
[ 0.018098] tseg: 0000000000
[ 0.018107] mce: CPU supports 5 MCE banks
[ 0.018156] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[ 0.027227] ftrace: allocating 21683 entries in 85 pages
[ 0.032486] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.072809] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (fam: 0f, model: 2f, stepping: 02)
[ 0.076000] Performance Events: AMD PMU driver.
[ 0.076000] ... version: 0
[ 0.076000] ... bit width: 48
[ 0.076000] ... generic registers: 4
[ 0.076000] ... value mask: 0000ffffffffffff
[ 0.076000] ... max period: 00007fffffffffff
[ 0.076000] ... fixed-purpose events: 0
[ 0.076000] ... event mask: 000000000000000f
[ 0.076000] x86: Booted up 1 node, 1 CPUs
[ 0.076000] smpboot: Total of 1 processors activated (4400.34 BogoMIPS)
[ 0.076000] devtmpfs: initialized
[ 0.080255] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080489] PM: Registering ACPI NVS region [mem 0x3fff0000-0x3fff2fff] (12288 bytes)
[ 0.082020] pinctrl core: initialized pinctrl subsystem
[ 0.082158] NET: Registered protocol family 16
[ 0.082351] cpuidle: using governor ladder
[ 0.082389] cpuidle: using governor menu
[ 0.082429] node 0 link 0: io port [6000, ffff]
[ 0.082433] TOM: 0000000040000000 aka 1024M
[ 0.082470] node 0 link 0: mmio [a0000, bffff]
[ 0.082473] node 0 link 0: mmio [feb00000, fec0ffff]
[ 0.082475] node 0 link 0: mmio [40000000, dfffffff]
[ 0.082477] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.082479] node 0 link 0: mmio [e0000000, e05fffff]
[ 0.082482] bus: [bus 00-05] on node 0 link 0
[ 0.082484] bus: 00 [io 0x0000-0xffff]
[ 0.082485] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.082487] bus: 00 [mem 0xfe030000-0xfcffffffff]
[ 0.082489] bus: 00 [mem 0x40000000-0xefffffff]
[ 0.082490] bus: 00 [mem 0xf0000000-0xfe02ffff]
[ 0.082541] ACPI: bus type PCI registered
[ 0.082578] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.082706] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.082759] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.083397] PCI: Using configuration type 1 for base access
[ 0.084677] ACPI: Added _OSI(Module Device)
[ 0.084716] ACPI: Added _OSI(Processor Device)
[ 0.084752] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.084789] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.090474] ACPI: Interpreter enabled
[ 0.090521] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.090627] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.090663] ACPI: Using IOAPIC for interrupt routing
[ 0.090731] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.098156] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[ 0.098205] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.098260] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.099775] PCI host bridge to bus 0000:00
[ 0.099814] pci_bus 0000:00: root bus resource [bus 00-05]
[ 0.099852] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.099891] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.099930] pci_bus 0000:00: root bus resource [io 0x6000-0xffff]
[ 0.099969] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.100004] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.100044] pci_bus 0000:00: root bus resource [mem 0x40000000-0xdfffffff]
[ 0.100083] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfe02ffff]
[ 0.100123] pci_bus 0000:00: root bus resource [mem 0xfeb00000-0xfebfffff]
[ 0.100174] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[ 0.100365] pci 0000:00:01.0: [10de:0050] type 00 class 0x060100
[ 0.100385] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.100553] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[ 0.100561] pci 0000:00:01.1: reg 0x10: [io 0xfc00-0xfc1f]
[ 0.100572] pci 0000:00:01.1: reg 0x20: [io 0xf800-0xf83f]
[ 0.100577] pci 0000:00:01.1: reg 0x24: [io 0xf400-0xf43f]
[ 0.100591] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.100735] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[ 0.100742] pci 0000:00:02.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff]
[ 0.100767] pci 0000:00:02.0: supports D1 D2
[ 0.100769] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.100863] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.100948] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[ 0.100957] pci 0000:00:02.1: reg 0x10: [mem 0xfeb00000-0xfeb000ff]
[ 0.100986] pci 0000:00:02.1: supports D1 D2
[ 0.100988] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101094] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.101183] pci 0000:00:04.0: [10de:0059] type 00 class 0x040100
[ 0.101191] pci 0000:00:04.0: reg 0x10: [io 0xf000-0xf0ff]
[ 0.101195] pci 0000:00:04.0: reg 0x14: [io 0xec00-0xecff]
[ 0.101200] pci 0000:00:04.0: reg 0x18: [mem 0xfe02d000-0xfe02dfff]
[ 0.101220] pci 0000:00:04.0: supports D1 D2
[ 0.101349] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[ 0.101365] pci 0000:00:06.0: reg 0x20: [io 0xe000-0xe00f]
[ 0.101373] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.101413] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.101452] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.101492] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.101666] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[ 0.101673] pci 0000:00:07.0: reg 0x10: [io 0x09f0-0x09f7]
[ 0.101678] pci 0000:00:07.0: reg 0x14: [io 0x0bf0-0x0bf3]
[ 0.101682] pci 0000:00:07.0: reg 0x18: [io 0x0970-0x0977]
[ 0.101686] pci 0000:00:07.0: reg 0x1c: [io 0x0b70-0x0b73]
[ 0.101691] pci 0000:00:07.0: reg 0x20: [io 0xcc00-0xcc0f]
[ 0.101695] pci 0000:00:07.0: reg 0x24: [mem 0xfe02b000-0xfe02bfff]
[ 0.101833] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[ 0.101841] pci 0000:00:08.0: reg 0x10: [io 0x09e0-0x09e7]
[ 0.101845] pci 0000:00:08.0: reg 0x14: [io 0x0be0-0x0be3]
[ 0.101849] pci 0000:00:08.0: reg 0x18: [io 0x0960-0x0967]
[ 0.101854] pci 0000:00:08.0: reg 0x1c: [io 0x0b60-0x0b63]
[ 0.101858] pci 0000:00:08.0: reg 0x20: [io 0xb800-0xb80f]
[ 0.101863] pci 0000:00:08.0: reg 0x24: [mem 0xfe02a000-0xfe02afff]
[ 0.101998] pci 0000:00:09.0: [10de:005c] type 01 class 0x060401
[ 0.102099] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.102182] pci 0000:00:0a.0: [10de:0057] type 00 class 0x068000
[ 0.102190] pci 0000:00:0a.0: reg 0x10: [mem 0xfe029000-0xfe029fff]
[ 0.102194] pci 0000:00:0a.0: reg 0x14: [io 0xb400-0xb407]
[ 0.102217] pci 0000:00:0a.0: supports D1 D2
[ 0.102219] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102312] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.102396] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[ 0.102424] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102520] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.102604] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[ 0.102631] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102725] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.102810] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[ 0.102837] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102932] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.103016] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[ 0.103043] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.103137] pci 0000:00:0e.0: System wakeup disabled by ACPI
[ 0.103226] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.103364] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.103497] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.103643] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.103826] pci 0000:01:00.0: [104c:8023] type 00 class 0x0c0010
[ 0.103838] pci 0000:01:00.0: reg 0x10: [mem 0xfdeff000-0xfdeff7ff]
[ 0.103845] pci 0000:01:00.0: reg 0x14: [mem 0xfdef8000-0xfdefbfff]
[ 0.103886] pci 0000:01:00.0: supports D1 D2
[ 0.103888] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.103958] pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.104004] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.104007] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.104010] pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff pref]
[ 0.104013] pci 0000:00:09.0: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.104015] pci 0000:00:09.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.104019] pci 0000:00:09.0: bridge window [io 0x6000-0xffff] (subtractive decode)
[ 0.104022] pci 0000:00:09.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.104024] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.104027] pci 0000:00:09.0: bridge window [mem 0x40000000-0xdfffffff] (subtractive decode)
[ 0.104029] pci 0000:00:09.0: bridge window [mem 0xf0000000-0xfe02ffff] (subtractive decode)
[ 0.104031] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfebfffff] (subtractive decode)
[ 0.104086] pci 0000:02:00.0: [1095:3132] type 00 class 0x018000
[ 0.104112] pci 0000:02:00.0: reg 0x10: [mem 0xfddff000-0xfddff07f 64bit]
[ 0.104129] pci 0000:02:00.0: reg 0x18: [mem 0xfddf8000-0xfddfbfff 64bit]
[ 0.104141] pci 0000:02:00.0: reg 0x20: [io 0x9c00-0x9c7f]
[ 0.104162] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.104221] pci 0000:02:00.0: supports D1 D2
[ 0.104272] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.104332] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 0.104371] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.104374] pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.104378] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.104412] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 0.104451] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 0.104454] pci 0000:00:0c.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.104457] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.104505] pci 0000:04:00.0: [11ab:4362] type 00 class 0x020000
[ 0.104522] pci 0000:04:00.0: reg 0x10: [mem 0xfd9fc000-0xfd9fffff 64bit]
[ 0.104531] pci 0000:04:00.0: reg 0x18: [io 0x7c00-0x7cff]
[ 0.104557] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.104601] pci 0000:04:00.0: supports D1 D2
[ 0.104603] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.104655] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.104712] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 0.106131] pci 0000:00:0d.0: bridge window [io 0x7000-0x7fff]
[ 0.106134] pci 0000:00:0d.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.106137] pci 0000:00:0d.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.106179] pci 0000:05:00.0: [10de:0140] type 00 class 0x030000
[ 0.106188] pci 0000:05:00.0: reg 0x10: [mem 0xf4000000-0xf7ffffff]
[ 0.106196] pci 0000:05:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.106204] pci 0000:05:00.0: reg 0x1c: [mem 0xfa000000-0xfaffffff 64bit]
[ 0.106214] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.106281] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.106336] pci 0000:00:0e.0: PCI bridge to [bus 05]
[ 0.106375] pci 0000:00:0e.0: bridge window [io 0x6000-0x6fff]
[ 0.106377] pci 0000:00:0e.0: bridge window [mem 0xf4000000-0xfbffffff]
[ 0.106381] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.106394] pci_bus 0000:00: on NUMA node 0
[ 0.106541] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.106939] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.107283] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.107626] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.107968] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.108372] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.108714] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.109110] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.109454] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.109805] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.110149] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.110492] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.110837] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.111239] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.111592] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.111944] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.112376] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.112597] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.112817] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.113038] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.113225] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.113432] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 0.113722] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.114012] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 0.114302] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 0.114592] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.114881] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.115170] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 0.115460] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.115756] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 0.116073] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 0.116368] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.117185] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.117435] vgaarb: setting as boot device: PCI:0000:05:00.0
[ 0.117475] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.117524] vgaarb: loaded
[ 0.117558] vgaarb: bridge control possible 0000:05:00.0
[ 0.117679] PCI: Using ACPI for IRQ routing
[ 0.122783] PCI: pci_cache_line_size set to 64 bytes
[ 0.122825] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.122828] e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
[ 0.123023] Switched to clocksource refined-jiffies
[ 0.130438] pnp: PnP ACPI init
[ 0.130491] ACPI: bus type PNP registered
[ 0.130726] system 00:00: [io 0x1000-0x107f] has been reserved
[ 0.130766] system 00:00: [io 0x1080-0x10ff] has been reserved
[ 0.130805] system 00:00: [io 0x1400-0x147f] has been reserved
[ 0.130844] system 00:00: [io 0x1480-0x14ff] has been reserved
[ 0.130883] system 00:00: [io 0x1800-0x187f] has been reserved
[ 0.130921] system 00:00: [io 0x1880-0x18ff] has been reserved
[ 0.130962] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.131553] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.131593] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.131632] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.131671] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.131725] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.131852] pnp 00:03: [dma 2]
[ 0.131893] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.132130] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.132370] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.132710] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.132859] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.132901] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133086] system 00:08: [mem 0x000cf000-0x000cffff] has been reserved
[ 0.133127] system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.133168] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.133208] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.133248] system 00:08: [mem 0x3fff0000-0x3fffffff] could not be reserved
[ 0.133288] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.133328] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.133368] system 00:08: [mem 0x00100000-0x3ffeffff] could not be reserved
[ 0.133409] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.133449] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.133489] system 00:08: [mem 0xfefff000-0xfeffffff] has been reserved
[ 0.133529] system 00:08: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.133568] system 00:08: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.133608] system 00:08: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.133648] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.133659] pnp: PnP ACPI: found 9 devices
[ 0.133694] ACPI: bus type PNP unregistered
[ 0.140155] Switched to clocksource acpi_pm
[ 0.140228] pci 0000:00:09.0: PCI bridge to [bus 01]
[ 0.140268] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.140308] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.140348] pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff pref]
[ 0.140403] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd7ffff pref]
[ 0.140453] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 0.140491] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.140530] pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.140571] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.140622] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 0.140659] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 0.140699] pci 0000:00:0c.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.140739] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.140791] pci 0000:04:00.0: BAR 6: assigned [mem 0xfd900000-0xfd91ffff pref]
[ 0.140841] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 0.140878] pci 0000:00:0d.0: bridge window [io 0x7000-0x7fff]
[ 0.140918] pci 0000:00:0d.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.140958] pci 0000:00:0d.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.141010] pci 0000:05:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref]
[ 0.141060] pci 0000:00:0e.0: PCI bridge to [bus 05]
[ 0.141097] pci 0000:00:0e.0: bridge window [io 0x6000-0x6fff]
[ 0.141136] pci 0000:00:0e.0: bridge window [mem 0xf4000000-0xfbffffff]
[ 0.141176] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.141228] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.141231] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.141233] pci_bus 0000:00: resource 6 [io 0x6000-0xffff]
[ 0.141235] pci_bus 0000:00: resource 7 [io 0x03b0-0x03df]
[ 0.141237] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.141240] pci_bus 0000:00: resource 9 [mem 0x40000000-0xdfffffff]
[ 0.141242] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfe02ffff]
[ 0.141244] pci_bus 0000:00: resource 11 [mem 0xfeb00000-0xfebfffff]
[ 0.141247] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.141249] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.141251] pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref]
[ 0.141254] pci_bus 0000:01: resource 4 [io 0x0000-0x03af]
[ 0.141256] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7]
[ 0.141258] pci_bus 0000:01: resource 6 [io 0x6000-0xffff]
[ 0.141260] pci_bus 0000:01: resource 7 [io 0x03b0-0x03df]
[ 0.141262] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.141265] pci_bus 0000:01: resource 9 [mem 0x40000000-0xdfffffff]
[ 0.141267] pci_bus 0000:01: resource 10 [mem 0xf0000000-0xfe02ffff]
[ 0.141269] pci_bus 0000:01: resource 11 [mem 0xfeb00000-0xfebfffff]
[ 0.141272] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.141274] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.141277] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.141279] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
[ 0.141281] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.141284] pci_bus 0000:03: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.141286] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
[ 0.141288] pci_bus 0000:04: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 0.141291] pci_bus 0000:04: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.141293] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff]
[ 0.141295] pci_bus 0000:05: resource 1 [mem 0xf4000000-0xfbffffff]
[ 0.141298] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.141339] NET: Registered protocol family 2
[ 0.141670] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.141766] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.141866] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.141971] TCP: reno registered
[ 0.142010] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.142059] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.142164] NET: Registered protocol family 1
[ 0.142500] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.212284] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.212457] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.212498] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 0.212541] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.212580] pci 0000:00:0b.0: Linking AER extended capability
[ 0.212648] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.212689] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 0.212731] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.212769] pci 0000:00:0c.0: Linking AER extended capability
[ 0.212840] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.212881] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 0.212923] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.212961] pci 0000:00:0d.0: Linking AER extended capability
[ 0.213035] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.213075] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 0.213118] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.213156] pci 0000:00:0e.0: Linking AER extended capability
[ 0.213216] pci 0000:05:00.0: Video device with shadowed ROM
[ 0.213219] PCI: CLS 32 bytes, default 64
[ 0.213298] Unpacking initramfs...
[ 0.358463] Freeing initrd memory: 6112K (ffff880037400000 - ffff8800379f8000)
[ 0.358949] microcode: AMD CPU family 0xf not supported
[ 0.359340] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.359415] audit: initializing netlink subsys (disabled)
[ 0.359482] audit: type=2000 audit(1486763325.355:1): initialized
[ 0.359899] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.359961] zbud: loaded
[ 0.360183] VFS: Disk quotas dquot_6.5.2
[ 0.360232] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.360346] msgmni has been set to 1996
[ 0.360712] alg: No test for stdrng (krng)
[ 0.360769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.360861] io scheduler noop registered
[ 0.360899] io scheduler deadline registered
[ 0.360967] io scheduler cfq registered (default)
[ 0.361122] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 0.361182] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 0.361231] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 0.361280] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[ 0.361358] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.361419] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.361528] GHES: HEST is not enabled!
[ 0.361651] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.381989] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.402351] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.402726] Linux agpgart interface v0.103
[ 0.402867] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.405380] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.405422] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.405605] mousedev: PS/2 mouse device common for all mice
[ 0.405706] rtc_cmos 00:02: RTC can wake from S4
[ 0.405876] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.405937] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram
[ 0.405991] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.406345] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 0.406384] AMD IOMMUv2 functionality not available on this system
[ 0.406538] TCP: cubic registered
[ 0.406600] NET: Registered protocol family 10
[ 0.406895] mip6: Mobile IPv6
[ 0.406933] NET: Registered protocol family 17
[ 0.406976] mpls_gso: MPLS GSO support
[ 0.407292] registered taskstats version 1
[ 0.407745] rtc_cmos 00:02: setting system clock to 2017-02-10 21:48:45 UTC (1486763325)
[ 0.407858] PM: Hibernation image not present or could not be loaded.
[ 0.409394] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 0.410830] Write protecting the kernel read-only data: 8192k
[ 0.411547] Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
[ 0.412301] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
[ 0.428191] systemd-udevd[55]: starting version 215
[ 0.428656] random: systemd-udevd urandom read with 1 bits of entropy available
[ 0.446262] ACPI Warning: SystemIO range 0x000000000000F800-0x000000000000F83F conflicts with OpRegion 0x000000000000F800-0x000000000000F805 (\SM00) (20140424/utaddress-254)
[ 0.446382] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.446475] i2c i2c-0: nForce2 SMBus adapter at 0xf400
[ 0.450442] ACPI: bus type USB registered
[ 0.450513] usbcore: registered new interface driver usbfs
[ 0.450561] usbcore: registered new interface driver hub
[ 0.458804] SCSI subsystem initialized
[ 0.466500] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.466559] ACPI: Power Button [PWRB]
[ 0.466685] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.466735] ACPI: Power Button [PWRF]
[ 0.470259] usbcore: registered new device driver usb
[ 0.470962] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.471186] ehci-pci: EHCI PCI platform driver
[ 0.471392] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 0.471436] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.471496] ehci-pci 0000:00:02.1: debug port 1
[ 0.471557] ehci-pci 0000:00:02.1: cache line size of 32 is not supported
[ 0.471580] ehci-pci 0000:00:02.1: irq 22, io mem 0xfeb00000
[ 0.472508] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.474432] ACPI: Fan [FAN] (on)
[ 0.476650] parport_pc 00:06: reported by Plug and Play ACPI
[ 0.476738] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 0.478915] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.478959] ACPI: Thermal Zone [THRM] (46 C)
[ 0.480065] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.480179] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.480220] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.480269] usb usb1: Product: EHCI Host Controller
[ 0.480306] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 0.480345] usb usb1: SerialNumber: 0000:00:02.1
[ 0.480529] hub 1-0:1.0: USB hub found
[ 0.480571] hub 1-0:1.0: 10 ports detected
[ 0.481120] ohci-pci: OHCI PCI platform driver
[ 0.481314] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 0.481358] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.481447] ohci-pci 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 0.486655] libata version 3.00 loaded.
[ 0.499826] FDC 0 is a post-1991 82077
[ 0.508735] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 0.538063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.538107] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.538156] usb usb2: Product: OHCI PCI host controller
[ 0.538194] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[ 0.538232] usb usb2: SerialNumber: 0000:00:02.0
[ 0.538433] hub 2-0:1.0: USB hub found
[ 0.538477] hub 2-0:1.0: 10 ports detected
[ 0.539002] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
[ 0.564053] firewire_ohci 0000:01:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 0.576327] EDAC MC: Ver: 3.0.0
[ 0.580410] MCE: In-kernel MCE decoding enabled.
[ 0.580719] AMD64 EDAC driver v3.4.0
[ 0.792019] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.860023] snd_intel8x0 0000:00:04.0: intel8x0_measure_ac97_clock: measured 54729 usecs (2688 samples)
[ 0.860078] snd_intel8x0 0000:00:04.0: clocking to 46911
[ 0.861651] pata_amd 0000:00:06.0: version 0.4.1
[ 0.872030] scsi0 : pata_amd
[ 0.872179] scsi1 : pata_amd
[ 0.872261] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
[ 0.872301] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
[ 0.872389] sata_nv 0000:00:07.0: version 3.5
[ 0.872651] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 0.876084] scsi2 : sata_nv
[ 0.880041] scsi3 : sata_nv
[ 0.880126] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 20
[ 0.880166] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 20
[ 0.880466] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 0.884041] scsi4 : sata_nv
[ 0.884173] scsi5 : sata_nv
[ 0.884256] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 23
[ 0.884296] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 23
[ 0.884375] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.884653] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 0.924894] usb 1-1: New USB device found, idVendor=0bb4, idProduct=0004
[ 0.924937] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 0.924977] usb 1-1: Product: MT65xx Android Phone
[ 0.925014] usb 1-1: Manufacturer: MediaTek
[ 0.925050] usb 1-1: SerialNumber: 0123456789ABCDEF
[ 1.044290] ata1.01: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
[ 1.044338] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc00000) ACPI=0x701f (600:60:0x1c)
[ 1.060216] ata1.01: configured for UDMA/33
[ 1.061868] scsi 0:0:1:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
[ 1.066907] firewire_core 0000:01:00.0: created device fw0: GUID 00016c20001a300a, S400
[ 1.196017] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.348025] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.356287] ata3.00: ATA-7: Hitachi HDS721680PLA380, P21OABEA, max UDMA/133
[ 1.356328] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.372267] ata3.00: configured for UDMA/133
[ 1.372403] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72168 ABEA PQ: 0 ANSI: 5
[ 1.408503] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:15:58:34:06:4b
[ 1.408558] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 1.408806] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.409573] EDAC amd64: DRAM ECC enabled.
[ 1.409615] EDAC amd64: K8 revE or earlier detected (node 0).
[ 1.409693] EDAC amd64: CS0: Double data rate SDRAM
[ 1.409729] EDAC amd64: CS2: Double data rate SDRAM
[ 1.409890] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 1.409979] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 1.411086] sata_sil24 0000:02:00.0: version 1.1
[ 1.411288] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 1.413144] sky2: driver version 1.30
[ 1.413373] sky2 0000:04:00.0: Yukon-2 EC chip revision 2
[ 1.413451] sky2 0000:04:00.0: irq 44 for MSI/MSI-X
[ 1.413694] sky2 0000:04:00.0 eth1: addr 00:15:58:34:06:4a
[ 1.418219] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 1.418784] scsi6 : sata_sil24
[ 1.425456] scsi7 : sata_sil24
[ 1.425577] ata7: SATA max UDMA/100 host m128@0xfddff000 port 0xfddf8000 irq 17
[ 1.425628] ata8: SATA max UDMA/100 host m128@0xfddff000 port 0xfddfa000 irq 17
[ 1.459794] ppdev: user-space parallel port driver
[ 1.469360] usbcore: registered new interface driver cdc_ether
[ 1.469719] usb 2-2: new low-speed USB device number 2 using ohci-pci
[ 1.471972] rndis_host 1-1:1.0 usb0: register 'rndis_host' at usb-0000:00:02.1-1, RNDIS device, 82:84:de:40:da:e6
[ 1.472109] usbcore: registered new interface driver rndis_host
[ 1.681045] usb 2-2: New USB device found, idVendor=09da, idProduct=c10a
[ 1.681091] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.681131] usb 2-2: Product: USB Mouse
[ 1.681167] usb 2-2: Manufacturer: A4Tech
[ 1.684023] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.860022] usb 2-7: new low-speed USB device number 3 using ohci-pci
[ 1.996021] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.076039] usb 2-7: New USB device found, idVendor=045e, idProduct=0750
[ 2.076079] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.076118] usb 2-7: Product: Wired Keyboard 600
[ 2.076155] usb 2-7: Manufacturer: Microsoft
[ 2.081465] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.104396] usbcore: registered new interface driver usbhid
[ 2.104439] usbhid: USB HID core driver
[ 2.105484] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/0003:09DA:C10A.0001/input/input6
[ 2.105708] hid-generic 0003:09DA:C10A.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:02.0-2/input0
[ 2.106060] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/0003:045E:0750.0002/input/input7
[ 2.106190] hid-generic 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:02.0-7/input0
[ 2.109209] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.1/0003:045E:0750.0003/input/input8
[ 2.109363] hid-generic 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:02.0-7/input1
[ 3.504037] ata7: SATA link down (SStatus 0 SControl 0)
[ 5.584037] ata8: SATA link down (SStatus 0 SControl 0)
[ 5.597301] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 5.597348] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.597529] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 5.597719] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 5.597835] sd 2:0:0:0: [sda] Write Protect is off
[ 5.597873] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.597903] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.599558] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 5.599815] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.671914] sda: sda1 sda2 sda3 < sda5 > sda4
[ 5.672585] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.305792] RPC: Registered named UNIX socket transport module.
[ 6.305846] RPC: Registered udp transport module.
[ 6.307262] RPC: Registered tcp transport module.
[ 6.307299] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.328058] cfg80211: Calling CRDA to update world regulatory domain
[ 6.343831] [drm] Initialized drm 1.1.0 20060810
[ 6.390280] FS-Cache: Loaded
[ 6.393687] fuse init (API version 7.23)
[ 6.415021] lp0: using parport0 (interrupt-driven).
[ 6.420457] wmi: Mapper loaded
[ 6.427986] FS-Cache: Netfs 'nfs' registered for caching
[ 6.435291] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 6.507289] PM: Starting manual resume from disk
[ 6.507345] PM: Hibernation image partition 8:4 present
[ 6.507347] PM: Looking for hibernation image.
[ 6.530272] PM: Image not found (code -22)
[ 6.530274] PM: Hibernation image not present or could not be loaded.
[ 6.745448] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 7.307978] random: nonblocking pool is initialized
[ 7.388704] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 7.388929] systemd[1]: Detected architecture 'x86-64'.
[ 7.462984] systemd[1]: Set hostname to <debian>.
[ 9.168505] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 9.168668] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 9.168739] systemd[1]: Starting Remote File Systems (Pre).
[ 9.169023] systemd[1]: Reached target Remote File Systems (Pre).
[ 9.169104] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 9.169440] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.169510] systemd[1]: Starting Encrypted Volumes.
[ 9.169730] systemd[1]: Reached target Encrypted Volumes.
[ 9.169787] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 9.169872] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 9.169941] systemd[1]: Expecting device dev-disk-by\x2duuid-535e6278\x2d107e\x2d4e6c\x2db06a\x2d5fb2a8a1bded.device...
[ 9.170136] systemd[1]: Expecting device dev-sda1.device...
[ 9.170311] systemd[1]: Starting Root Slice.
[ 9.170547] systemd[1]: Created slice Root Slice.
[ 9.170599] systemd[1]: Starting User and Session Slice.
[ 9.170856] systemd[1]: Created slice User and Session Slice.
[ 9.170909] systemd[1]: Starting Delayed Shutdown Socket.
[ 9.171160] systemd[1]: Listening on Delayed Shutdown Socket.
[ 9.171213] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 9.171463] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 9.171517] systemd[1]: Starting Journal Socket (/dev/log).
[ 9.171763] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.171820] systemd[1]: Starting udev Control Socket.
[ 9.172089] systemd[1]: Listening on udev Control Socket.
[ 9.172144] systemd[1]: Starting udev Kernel Socket.
[ 9.172377] systemd[1]: Listening on udev Kernel Socket.
[ 9.172437] systemd[1]: Starting Journal Socket.
[ 9.172679] systemd[1]: Listening on Journal Socket.
[ 9.172750] systemd[1]: Starting System Slice.
[ 9.173002] systemd[1]: Created slice System Slice.
[ 9.173060] systemd[1]: Started File System Check on Root Device.
[ 9.173111] systemd[1]: Starting system-getty.slice.
[ 9.173380] systemd[1]: Created slice system-getty.slice.
[ 9.173450] systemd[1]: Starting Increase datagram queue length...
[ 9.174257] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.175153] systemd[1]: Starting udev Coldplug all Devices...
[ 9.176263] systemd[1]: Mounting Debug File System...
[ 9.247820] systemd[1]: Starting Load Kernel Modules...
[ 9.249178] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 9.250172] systemd[1]: Mounting Huge Pages File System...
[ 9.267626] systemd[1]: Started Set Up Additional Binary Formats.
[ 9.267726] systemd[1]: Starting Slices.
[ 9.267990] systemd[1]: Reached target Slices.
[ 9.509393] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 9.509888] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 9.569821] systemd[1]: Started Increase datagram queue length.
[ 9.570050] systemd[1]: Starting Syslog Socket.
[ 9.570318] systemd[1]: Listening on Syslog Socket.
[ 9.570382] systemd[1]: Starting Journal Service...
[ 9.571510] systemd[1]: Started Journal Service.
[ 10.616515] systemd-udevd[350]: starting version 215
[ 13.180572] powernow_k8: [Firmware Bug]: No PSB or ACPI _PSS objects
[ 13.180617] powernow_k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
[ 13.271259] EXT4-fs (sda5): re-mounted. Opts: sb=884736,errors=remount-ro
[ 14.988637] Adding 2148348k swap on /dev/sda4. Priority:-1 extents:1 across:2148348k FS
[ 15.038154] nvidia: module license 'NVIDIA' taints kernel.
[ 15.038200] Disabling lock debugging due to kernel taint
[ 15.063778] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 15.063852] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 15.064872] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:05:00.0 on minor 0
[ 15.064935] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.134 Fri Dec 9 11:30:02 PST 2016
[ 16.928103] systemd-journald[338]: Received request to flush runtime journal from PID 1
[ 22.801743] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 22.988230] NFSD: starting 90-second grace period (net ffffffff818ba200)
[ 28.266904] forcedeth 0000:00:0a.0 eth0: no link during initialization
[ 28.269406] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.275414] sky2 0000:04:00.0 eth1: enabling interface
[ 28.276671] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 196.611102] usb 1-1: USB disconnect, device number 2
[ 196.613376] rndis_host 1-1:1.0 usb0: unregister 'rndis_host' usb-0000:00:02.1-1, RNDIS device
[ 915.077284] [drm] Module unloaded
[ 982.104030] usb 1-1: new high-speed USB device number 5 using ehci-pci
[ 982.236894] usb 1-1: New USB device found, idVendor=0bb4, idProduct=0c03
[ 982.236900] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 982.236903] usb 1-1: Product: MT65xx Android Phone
[ 982.236905] usb 1-1: Manufacturer: MediaTek
[ 982.236907] usb 1-1: SerialNumber: 0123456789ABCDEF
[ 982.248989] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 982.256595] scsi8 : usb-storage 1-1:1.0
[ 982.256729] usbcore: registered new interface driver usb-storage
[ 982.626070] usb 1-1: USB disconnect, device number 5
[ 982.964030] usb 1-1: new high-speed USB device number 6 using ehci-pci
[ 983.096894] usb 1-1: New USB device found, idVendor=0bb4, idProduct=0004
[ 983.096900] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 983.096903] usb 1-1: Product: MT65xx Android Phone
[ 983.096905] usb 1-1: Manufacturer: MediaTek
[ 983.096907] usb 1-1: SerialNumber: 0123456789ABCDEF
[ 983.101443] rndis_host 1-1:1.0 usb0: register 'rndis_host' at usb-0000:00:02.1-1, RNDIS device, 52:b6:4c:5b:44:be
[ 1588.822076] NVRM: The NVIDIA GeForce 6600 GT GPU installed in this system is
NVRM: supported through the NVIDIA 304.xx Legacy drivers. Please
NVRM: visit http://www.nvidia.com/object/unix.html for more
NVRM: information. The 340.101 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
[ 1588.822091] NVRM: No NVIDIA graphics adapter found!
[ 1594.152705] NVRM: The NVIDIA GeForce 6600 GT GPU installed in this system is
NVRM: supported through the NVIDIA 304.xx Legacy drivers. Please
NVRM: visit http://www.nvidia.com/object/unix.html for more
NVRM: information. The 340.101 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
[ 1594.152719] NVRM: No NVIDIA graphics adapter found!
[/console]

Добавлено: 11.02.2017 01:39:53

"DiabloPC" написал:
Значит не удалил

Удалял с aptitude remove. Если знаете как удалить её без остатка тогда напишите.

11.02.2017 01:41 #420170

"Linux-GEEK" написал:
[ 1594.152705] NVRM: The NVIDIA GeForce 6600 GT GPU installed in this system is
NVRM: supported through the NVIDIA 304.xx Legacy drivers. Please
NVRM: visit http://www.nvidia.com/object/unix.html for more
NVRM: information. The 340.101 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
[ 1594.152719] NVRM: No NVIDIA graphics adapter found!

ну тут, как по мне, понятно все
Добавлено: 11th Feb 2017 12:41:28 am

"Linux-GEEK" написал:
Удалял с aptitude remove

[console]apt-get purge[/console]

11.02.2017 01:59 #420171

"DiabloPC" написал:
apt-get purge

[console]apt-get purge
Ни одного пакета не будет установлено, обновлено или удалено.
0 пакетов обновлено, 0 установлено новых, 0 пакетов отмечено для удаления, и 163 пакетов не обновлено.
Необходимо получить 0 B архивов. После распаковки 0 B будет занято.[/console]
*DONT_KNOW* Не хочет он сам их удалять *WALL*