Помогите с USB-принтером Samsung ML-1250

Тогда выполняем от рута:
[console]
/etc/init.d/cups restart
[/console]
и сразу после этого
[console]
dmesg | tail -n 50
[/console]

[ 8456.901064] Buffer I/O error on device hda, logical block 4
[ 8456.901066] Buffer I/O error on device hda, logical block 5
[ 8456.901068] Buffer I/O error on device hda, logical block 6
[ 8456.901071] Buffer I/O error on device hda, logical block 7
[ 8456.902722] ide-cd: hda: tray open
[ 8456.905050] end_request: I/O error, dev hda, sector 0
[ 8456.905053] Buffer I/O error on device hda, logical block 0
[ 8456.905056] Buffer I/O error on device hda, logical block 1
[ 8458.310600] ide-cd: hda: tray open
[ 8458.312963] end_request: I/O error, dev hda, sector 0
[ 8458.314638] ide-cd: hda: tray open
[ 8458.316943] end_request: I/O error, dev hda, sector 0
[ 8459.098902] ide-cd: hda: tray open
[ 8459.100970] end_request: I/O error, dev hda, sector 0
[ 8459.102647] ide-cd: hda: tray open
[ 8459.104939] end_request: I/O error, dev hda, sector 0
[ 8475.206602] ide-cd: hda: tray open
[ 8475.208966] end_request: I/O error, dev hda, sector 0
[ 8475.208970] __ratelimit: 20 callbacks suppressed
[ 8475.208974] Buffer I/O error on device hda, logical block 0
[ 8475.208977] Buffer I/O error on device hda, logical block 1
[ 8475.208982] Buffer I/O error on device hda, logical block 2
[ 8475.208984] Buffer I/O error on device hda, logical block 3
[ 8475.208987] Buffer I/O error on device hda, logical block 4
[ 8475.208990] Buffer I/O error on device hda, logical block 5
[ 8475.208992] Buffer I/O error on device hda, logical block 6
[ 8475.208995] Buffer I/O error on device hda, logical block 7
[ 8475.210641] ide-cd: hda: tray open
[ 8475.213026] end_request: I/O error, dev hda, sector 0
[ 8475.213029] Buffer I/O error on device hda, logical block 0
[ 8475.213032] Buffer I/O error on device hda, logical block 1
[10791.596908] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[10791.597155] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[10793.085621] wlan0: deauthenticating by local choice (reason=3)
[10809.468050] eth0: no IPv6 routers present
[10823.368119] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[10940.719875] [drm:drm_wait_vblank] *ERROR* failed to acquire vblank counter, -22
[10940.727771] [drm:drm_wait_vblank] *ERROR* failed to acquire vblank counter, -22
[11177.897564] sky2 eth0: Link is down.
[11180.154324] wlan0: authenticate with AP 00:19:cb:58:a7:eb
[11180.155740] wlan0: authenticated
[11180.155744] wlan0: associate with AP 00:19:cb:58:a7:eb
[11180.170395] wlan0: RX AssocResp from 00:19:cb:58:a7:eb (capab=0x411 status=0 aid=1)
[11180.170400] wlan0: associated
[11180.170966] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[11194.828050] wlan0: no IPv6 routers present
[14028.002727] atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
[14028.002731] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[14028.071869] atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
[14028.071873] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.

Чтобы посмотреть запущенных демонов
sudo aptitude install chkconfig
sudo chkonfig --list

И будет видно состояние cups.

maxim@localhost:~$ sudo chkconfig --list
acpi-support 0:off 1:off 2:on 3:on 4:on 5:on 6:off
acpid 0:off 1:off 2:on 3:on 4:on 5:on 6:off
anacron 0:off 1:off 2:on 3:on 4:on 5:on 6:off
apmd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
atd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
avahi-daemon 0:off 1:off 2:on 3:on 4:on 5:on 6:off
bluetooth 0:off 1:off 2:on 3:on 4:on 5:on 6:off
bootlogd 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
bootmisc.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
checkfs.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
checkroot.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
console-screen.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
cpufrequtils 0:off 1:off 2:on 3:on 4:on 5:on 6:off
cron 0:off 1:off 2:on 3:on 4:on 5:on 6:off
cups 0:off 1:off 2:on 3:on 4:on 5:on 6:off S:on
dbus 0:off 1:off 2:on 3:on 4:on 5:on 6:off
dhcdbd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
exim4 0:off 1:off 2:on 3:on 4:on 5:on 6:off
gdm 0:off 1:off 2:on 3:on 4:on 5:on 6:off
glibc.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
hal 0:off 1:off 2:on 3:on 4:on 5:on 6:off
hdparm 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
hibernate 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
hostname.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
hwclock.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
hwclockfirst.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
ifupdown 0:on 1:off 2:off 3:off 4:off 5:off 6:off S:on
ifupdown-clean 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
keymap.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
killprocs 0:off 1:on 2:off 3:off 4:off 5:off 6:off
loadcpufreq 0:off 1:off 2:on 3:on 4:on 5:on 6:off
lpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
module-init-tools 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
mountall-bootclean.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
mountall.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
mountdevsubfs.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
mountkernfs.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
mountnfs-bootclean.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
mountnfs.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
mountoverflowtmp 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
mtab.sh 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
network-manager 0:off 1:off 2:on 3:on 4:on 5:on 6:off
network-manager-dispatcher 0:off 1:off 2:on 3:on 4:on 5:on 6:off
networking 0:on 1:off 2:off 3:off 4:off 5:off 6:off S:on
openbsd-inetd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
openvpn 0:off 1:off 2:on 3:on 4:on 5:on 6:off
pcmciautils 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
portmap 0:on 1:off 2:off 3:off 4:off 5:off 6:off S:on
procps 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
rc.local 0:off 1:off 2:on 3:on 4:on 5:on 6:off
rcS 0:off 1:off 2:off 3:off 4:off 5:off 6:off
resolvconf 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
rmnologin 0:off 1:off 2:on 3:on 4:on 5:on 6:off
rsync 0:off 1:off 2:on 3:on 4:on 5:on 6:off
rsyslog 0:off 1:off 2:on 3:on 4:on 5:on 6:off
saned 0:off 1:off 2:on 3:on 4:on 5:on 6:off
sendsigs 0:on 1:off 2:off 3:off 4:off 5:off 6:off
stop-bootlogd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
stop-bootlogd-single 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
sudo 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
udev 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
udev-mtab 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on
umountfs 0:on 1:off 2:off 3:off 4:off 5:off 6:off
umountnfs.sh 0:on 1:off 2:off 3:off 4:off 5:off 6:off
umountroot 0:on 1:off 2:off 3:off 4:off 5:off 6:off
urandom 0:on 1:off 2:off 3:off 4:off 5:off 6:off S:on
vbesave 0:off 1:off 2:on 3:on 4:on 5:on 6:off
wpa-ifupdown 0:on 1:off 2:off 3:off 4:off 5:off 6:off
x11-common 0:off 1:off 2:off 3:off 4:off 5:off 6:off S:on

Add bookmark написал:

maxim@localhost:~$ sudo chkconfig --list
cups 0:off 1:off 2:on 3:on 4:on 5:on 6:off S:on

То бишь с cups все в порядке ....
Осталось только с дровишками разобраться, у убунты своя ставилка дров... :) типа для блондинок...

А с чем не в порядке?

Add bookmark написал:

[ 8456.901064] Buffer I/O error on device hda, logical block 4
[ 8456.901066] Buffer I/O error on device hda, logical block 5
[ 8456.901068] Buffer I/O error on device hda, logical block 6
[ 8456.901071] Buffer I/O error on device hda, logical block 7
[ 8456.902722] ide-cd: hda: tray open
[ 8456.905050] end_request: I/O error, dev hda, sector 0
[ 8456.905053] Buffer I/O error on device hda, logical block 0
[ 8456.905056] Buffer I/O error on device hda, logical block 1

А с винтом все нормально? - похоже не очень...

А чего с винтом?

Add bookmark написал:

А чего с винтом?

Я не телепат, но I/O error на винте - не гуд ... :) Дрова -то на принтер поставил?
http://driver.ru/?file_cid=906197998864e9ffdfa8c49b717

Похоже они...

Не пашет.