web камера genius facecam 300 и debian whezzy

[ 0.513888] system 00:02: [mem 0xff000000-0xffffffff] has been reserved
[ 0.513891] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.513971] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 0.513973] pnp 00:03: [io 0x0300-0x031f]
[ 0.513975] pnp 00:03: [io 0x0290-0x029f]
[ 0.513977] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 0.514012] system 00:03: [io 0x0300-0x031f] has been reserved
[ 0.514015] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.514017] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.514248] pnp 00:04: [io 0x0378-0x037f]
[ 0.514257] pnp 00:04: [irq 5]
[ 0.514259] pnp 00:04: [dma 3]
[ 0.514353] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.514362] pnp 00:05: [dma 4]
[ 0.514364] pnp 00:05: [io 0x0000-0x000f]
[ 0.514365] pnp 00:05: [io 0x0081-0x0083]
[ 0.514367] pnp 00:05: [io 0x0087]
[ 0.514369] pnp 00:05: [io 0x0089-0x008b]
[ 0.514370] pnp 00:05: [io 0x008f]
[ 0.514372] pnp 00:05: [io 0x00c0-0x00df]
[ 0.514392] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.514400] pnp 00:06: [io 0x0070-0x0071]
[ 0.514404] pnp 00:06: [irq 8]
[ 0.514423] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.514430] pnp 00:07: [io 0x0061]
[ 0.514449] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.514466] pnp 00:08: [io 0x0010-0x001f]
[ 0.514468] pnp 00:08: [io 0x0022-0x003f]
[ 0.514469] pnp 00:08: [io 0x0044-0x005f]
[ 0.514471] pnp 00:08: [io 0x0072-0x007f]
[ 0.514473] pnp 00:08: [io 0x0080]
[ 0.514474] pnp 00:08: [io 0x0084-0x0086]
[ 0.514476] pnp 00:08: [io 0x0088]
[ 0.514478] pnp 00:08: [io 0x008c-0x008e]
[ 0.514480] pnp 00:08: [io 0x0090-0x009f]
[ 0.514482] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.514483] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.514485] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.514527] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.514529] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.514536] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.514540] pnp 00:09: [irq 13]
[ 0.514560] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.514588] pnp 00:0a: [io 0x1770-0x1777]
[ 0.514624] system 00:0a: [io 0x1770-0x1777] has been reserved
[ 0.514626] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.514642] pnp 00:0b: [io 0x0060]
[ 0.514644] pnp 00:0b: [io 0x0064]
[ 0.514648] pnp 00:0b: [irq 1]
[ 0.514674] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.514844] pnp 00:0c: [io 0x03f8-0x03ff]
[ 0.514848] pnp 00:0c: [irq 4]
[ 0.514849] pnp 00:0c: [dma 0 disabled]
[ 0.514903] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.515162] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[ 0.515197] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.515202] pnp: PnP ACPI: found 14 devices
[ 0.515203] ACPI: ACPI bus type pnp unregistered
[ 0.515206] PnPBIOS: Disabled by ACPI PNP
[ 0.552463] PCI: max bus depth: 1 pci_try_num: 2
[ 0.552496] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.552500] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.552504] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe0fffff]
[ 0.552507] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
[ 0.552512] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[ 0.552515] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 0.552527] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.552537] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[ 0.552540] pci 0000:00:15.1: bridge window [io 0xc000-0xcfff]
[ 0.552547] pci 0000:00:15.1: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
[ 0.552571] pci 0000:00:02.0: setting latency timer to 64
[ 0.552589] pci 0000:00:15.0: setting latency timer to 64
[ 0.552598] pci 0000:00:15.1: setting latency timer to 64
[ 0.552602] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.552604] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.552606] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.552608] pci_bus 0000:00: resource 7 [io 0x1778-0xffff]
[ 0.552610] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.552612] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.552614] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
[ 0.552616] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.552618] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe0fffff]
[ 0.552620] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref]
[ 0.552622] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.552624] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
[ 0.552626] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
[ 0.552628] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
[ 0.552630] pci_bus 0000:02: resource 7 [io 0x1778-0xffff]
[ 0.552631] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.552633] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.552635] pci_bus 0000:02: resource 10 [mem 0xd0000000-0xffffffff]
[ 0.552638] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.552640] pci_bus 0000:04: resource 2 [mem 0xdc100000-0xdc1fffff 64bit pref]
[ 0.552808] NET: Registered protocol family 2
[ 0.552911] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.553212] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.553629] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.553844] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.553847] TCP reno registered
[ 0.553849] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.553858] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.553962] NET: Registered protocol family 1
[ 1.612486] pci 0000:01:00.0: Boot video device
[ 1.612515] PCI: CLS 64 bytes, default 64
[ 1.612572] Unpacking initramfs...
[ 1.830902] Freeing initrd memory: 10488k freed
[ 1.834111] perf: AMD IBS detected (0x000000ff)
[ 1.834414] audit: initializing netlink socket (disabled)
[ 1.834426] type=2000 audit(1403464708.828:1): initialized
[ 1.846435] highmem bounce pool size: 64 pages
[ 1.846441] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.847685] VFS: Disk quotas dquot_6.5.2
[ 1.847732] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.847813] msgmni has been set to 1626
[ 1.848120] alg: No test for stdrng (krng)
[ 1.848170] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.848174] io scheduler noop registered
[ 1.848176] io scheduler deadline registered
[ 1.848197] io scheduler cfq registered (default)
[ 1.848279] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.848324] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.848385] pcieport 0000:00:15.0: setting latency timer to 64
[ 1.848431] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X
[ 1.848493] pcieport 0000:00:15.1: setting latency timer to 64
[ 1.848538] pcieport 0000:00:15.1: irq 42 for MSI/MSI-X
[ 1.848619] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.848621] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.848623] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 1.848626] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.848642] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.848646] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.848662] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 1.848664] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.848668] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 1.848681] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.848696] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.848697] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.848942] ERST: Table is not found!
[ 1.848943] GHES: HEST is not enabled!
[ 1.848954] isapnp: Scanning for PnP cards...
[ 2.202879] isapnp: No Plug & Play device found
[ 2.203025] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.223379] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.244694] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.264822] Linux agpgart interface v0.103
[ 2.265005] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.265007] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.265384] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.265612] mousedev: PS/2 mouse device common for all mice
[ 2.265655] rtc_cmos 00:06: RTC can wake from S4
[ 2.265838] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.265864] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.265884] cpuidle: using governor ladder
[ 2.265886] cpuidle: using governor menu
[ 2.266106] TCP cubic registered
[ 2.266200] NET: Registered protocol family 10
[ 2.266655] Mobile IPv6
[ 2.266657] NET: Registered protocol family 17
[ 2.266661] Registering the dns_resolver key type
[ 2.266680] Using IPI No-Shortcut mode
[ 2.266969] PM: Hibernation image not present or could not be loaded.
[ 2.266983] registered taskstats version 1
[ 2.267541] rtc_cmos 00:06: setting system clock to 2014-06-22 19:18:30 UTC (1403464710)
[ 2.267604] Initializing network drop monitor service
[ 2.267710] Freeing unused kernel memory: 420k freed
[ 2.267842] Write protecting the kernel text: 2856k
[ 2.267872] Write protecting the kernel read-only data: 1084k
[ 2.267874] NX-protecting the kernel data: 3288k
[ 2.278417] udevd[59]: starting version 175
[ 2.282626] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.295550] SCSI subsystem initialized
[ 2.297416] usbcore: registered new interface driver usbfs
[ 2.297439] usbcore: registered new interface driver hub
[ 2.307414] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.307476] r8169 0000:04:00.0: setting latency timer to 64
[ 2.307555] r8169 0000:04:00.0: irq 43 for MSI/MSI-X
[ 2.307979] r8169 0000:04:00.0: eth0: RTL8168evl/8111evl at 0xf83f6000, c8:60:00:d0:ec:ee, XID 0c900800 IRQ 43
[ 2.307982] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.309834] libata version 3.00 loaded.
[ 2.310317] usbcore: registered new device driver usb
[ 2.310765] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.313508] scsi0 : pata_atiixp
[ 2.316408] scsi1 : pata_atiixp
[ 2.316538] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 2.316541] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 2.316626] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.316652] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.316661] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.316687] QUIRK: Enable AMD PLL fix
[ 2.316698] ehci_hcd 0000:00:12.2: debug port 1
[ 2.316721] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe109000
[ 2.332417] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.332483] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.332491] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.332497] usb usb1: Product: EHCI Host Controller
[ 2.332503] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 2.332508] usb usb1: SerialNumber: 0000:00:12.2
[ 2.333047] hub 1-0:1.0: USB hub found
[ 2.333053] hub 1-0:1.0: 5 ports detected
[ 2.333159] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.333166] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.333173] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.333192] ehci_hcd 0000:00:13.2: debug port 1
[ 2.333205] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe107000
[ 2.344368] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.344455] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.344463] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.344470] usb usb2: Product: EHCI Host Controller
[ 2.344475] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 2.344481] usb usb2: SerialNumber: 0000:00:13.2
[ 2.344643] hub 2-0:1.0: USB hub found
[ 2.344646] hub 2-0:1.0: 5 ports detected
[ 2.344748] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 2.344756] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 2.344762] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.344783] ehci_hcd 0000:00:16.2: debug port 1
[ 2.344797] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe104000
[ 2.344997] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.356382] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.356442] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.356450] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.356457] usb usb3: Product: EHCI Host Controller
[ 2.356463] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 2.356468] usb usb3: SerialNumber: 0000:00:16.2
[ 2.356672] hub 3-0:1.0: USB hub found
[ 2.356678] hub 3-0:1.0: 4 ports detected
[ 2.356878] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.356900] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 2.356928] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe10a000
[ 2.416358] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.416362] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.416364] usb usb4: Product: OHCI Host Controller
[ 2.416366] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 2.416367] usb usb4: SerialNumber: 0000:00:12.0
[ 2.416634] hub 4-0:1.0: USB hub found
[ 2.416642] hub 4-0:1.0: 5 ports detected
[ 2.416734] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.416742] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.416758] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe108000
[ 2.476348] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.476351] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.476354] usb usb5: Product: OHCI Host Controller
[ 2.476355] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 2.476357] usb usb5: SerialNumber: 0000:00:13.0
[ 2.476631] hub 5-0:1.0: USB hub found
[ 2.476639] hub 5-0:1.0: 5 ports detected
[ 2.476730] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.476738] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 2.476753] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe106000
[ 2.536352] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.536355] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.536357] usb usb6: Product: OHCI Host Controller
[ 2.536359] usb usb6: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 2.536360] usb usb6: SerialNumber: 0000:00:14.5
[ 2.536619] hub 6-0:1.0: USB hub found
[ 2.536626] hub 6-0:1.0: 2 ports detected
[ 2.536722] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 2.536730] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 2.536748] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe105000
[ 2.596350] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.596354] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.596356] usb usb7: Product: OHCI Host Controller
[ 2.596357] usb usb7: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 2.596359] usb usb7: SerialNumber: 0000:00:16.0
[ 2.596621] hub 7-0:1.0: USB hub found
[ 2.596629] hub 7-0:1.0: 4 ports detected
[ 2.596822] ahci 0000:00:11.0: version 3.0
[ 2.596951] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.596954] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
[ 2.598115] scsi2 : ahci
[ 2.598183] scsi3 : ahci
[ 2.598244] scsi4 : ahci
[ 2.598337] scsi5 : ahci
[ 2.598561] ata3: SATA max UDMA/133 abar m2048@0xfe10b000 port 0xfe10b100 irq 19
[ 2.598564] ata4: SATA max UDMA/133 abar m2048@0xfe10b000 port 0xfe10b180 irq 19
[ 2.598567] ata5: SATA max UDMA/133 abar m2048@0xfe10b000 port 0xfe10b200 irq 19
[ 2.598570] ata6: SATA max UDMA/133 abar m2048@0xfe10b000 port 0xfe10b280 irq 19
[ 2.644406] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.781822] usb 1-1: New USB device found, idVendor=1a40, idProduct=0201
[ 2.781833] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.781840] usb 1-1: Product: USB 2.0 Hub [MTT]
[ 2.782203] hub 1-1:1.0: USB hub found
[ 2.782332] hub 1-1:1.0: 7 ports detected
[ 2.832374] Refined TSC clocksource calibration: 2796.520 MHz.
[ 2.832389] Switching to clocksource tsc
[ 2.892062] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[ 2.916431] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.032041] usb 1-2: New USB device found, idVendor=04b8, idProduct=011c
[ 3.032051] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.032058] usb 1-2: Product: EPSON Scanner
[ 3.032063] usb 1-2: Manufacturer: EPSON
[ 3.088368] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.088418] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.088468] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.089580] ata3.00: ATA-8: Hitachi HDS721050CLA362, JP2OA50E, max UDMA/133
[ 3.089584] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.089761] ata6.00: ATA-8: ST1000DM003-1CH162, CC46, max UDMA/133
[ 3.089769] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.090503] ata3.00: configured for UDMA/133
[ 3.090619] ata6.00: configured for UDMA/133
[ 3.090726] ata4.00: ATAPI: ATAPI iHAS122 C, XL05, max UDMA/100
[ 3.090783] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
[ 3.091612] ata4.00: configured for UDMA/100
[ 3.093837] scsi 3:0:0:0: CD-ROM ATAPI iHAS122 C XL05 PQ: 0 ANSI: 5
[ 3.094484] scsi 5:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC46 PQ: 0 ANSI: 5
[ 3.097766] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.097798] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.097802] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 3.097846] sd 2:0:0:0: [sda] Write Protect is off
[ 3.097848] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.097926] sd 5:0:0:0: [sdb] Write Protect is off
[ 3.097930] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.097935] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.097956] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.101358] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.101368] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.101603] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.105423] sda: sda1 sda2 sda3
[ 3.106339] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.114393] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.114506] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 3.114559] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 3.128506] sdb: sdb2 < sdb5 > sdb3 sdb4
[ 3.129429] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 3.352120] usb 5-1: new low-speed USB device number 2 using ohci_hcd
[ 3.520735] usb 5-1: New USB device found, idVendor=04b4, idProduct=0033
[ 3.520746] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.531706] input: HID 04b4:0033 as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input1
[ 3.532048] generic-usb 0003:04B4:0033.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b4:0033] on usb-0000:00:13.0-1/input0
[ 3.532073] usbcore: registered new interface driver usbhid
[ 3.532074] usbhid: USB HID core driver
[ 3.593316] usb 1-1.1: new full-speed USB device number 4 using ehci_hcd
[ 3.603874] device-mapper: uevent: version 1.0.3
[ 3.604036] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.694356] usb 1-1.1: New USB device found, idVendor=093a, idProduct=2627
[ 3.694366] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.888239] PM: Starting manual resume from disk
[ 3.888242] PM: Hibernation image partition 254:1 present
[ 3.888244] PM: Looking for hibernation image.
[ 3.889557] PM: Image not found (code -22)
[ 3.889566] PM: Hibernation image not present or could not be loaded.
[ 3.941017] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.023123] udevd[425]: starting version 175
[ 5.475419] wmi: Mapper loaded
[ 5.494444] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 5.625294] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 5.628186] asus_wmi: ASUS WMI generic driver loaded
[ 5.632611] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 5.632752] ACPI: Power Button [PWRB]
[ 5.632818] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.632852] ACPI: Power Button [PWRF]
[ 5.642767] ACPI: acpi_idle registered with cpuidle
[ 5.669422] asus_wmi: Initialization: 0x0
[ 5.669442] asus_wmi: BIOS WMI version: 0.9
[ 5.669476] asus_wmi: SFUN value: 0x0
[ 5.669702] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
[ 5.793946] powernow-k8: Found 1 AMD Athlon(tm) II X4 641 Quad-Core Processor (4 cpu cores) (version 2.20.00)
[ 5.794026] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 5.794028] powernow-k8: 1 : pstate 1 (2500 MHz)
[ 5.794029] powernow-k8: 2 : pstate 2 (2200 MHz)
[ 5.794031] powernow-k8: 3 : pstate 3 (2000 MHz)
[ 5.794033] powernow-k8: 4 : pstate 4 (1800 MHz)
[ 5.794034] powernow-k8: 5 : pstate 5 (1400 MHz)
[ 5.794036] powernow-k8: 6 : pstate 6 (1100 MHz)
[ 5.794037] powernow-k8: 7 : pstate 7 (800 MHz)
[ 5.842158] parport_pc 00:04: reported by Plug and Play ACPI
[ 5.842216] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 6.103412] nvidia: module license 'NVIDIA' taints kernel.
[ 6.103422] Disabling lock debugging due to kernel taint
[ 6.641772] nvidia 0000:01:00.0: setting latency timer to 64
[ 6.641786] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.642046] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.117 Tue Nov 26 21:36:39 PST 2013
[ 6.692038] hda_codec: ALC887-VD: BIOS auto-probing.
[ 6.702913] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 6.706861] hda_intel: Disabling MSI
[ 6.706941] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 7.584364] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 7.616440] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 7.648115] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 7.680108] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 7.696620] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
[ 7.697035] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
[ 7.697472] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
[ 7.697796] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[ 10.568873] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 10.769351] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 10.854253] loop: module loaded
[ 11.578252] Adding 5472252k swap on /dev/mapper/vg_centos-lv_swap. Priority:-1 extents:1 across:5472252k
[ 11.880624] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 11.967798] fuse init (API version 7.17)
[ 13.866380] RPC: Registered named UNIX socket transport module.
[ 13.866389] RPC: Registered udp transport module.
[ 13.866394] RPC: Registered tcp transport module.
[ 13.866399] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.922560] FS-Cache: Loaded
[ 14.029632] FS-Cache: Netfs 'nfs' registered for caching
[ 14.055414] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.186820] r8169 0000:04:00.0: firmware: agent aborted loading rtl_nic/rtl8168e-3.fw (not found?)
[ 14.187088] r8169 0000:04:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[ 14.197041] r8169 0000:04:00.0: eth0: link down
[ 14.197098] r8169 0000:04:00.0: eth0: link down
[ 14.197426] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.016690] r8169 0000:04:00.0: eth0: link up
[ 16.017035] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.192963] /dev/vmmon[2788]: Module vmmon: registered with major=10 minor=165
[ 17.192979] /dev/vmmon[2788]: Module vmmon: initialized
[ 17.256949] [2799]: VMCI: shared components initialized.
[ 17.257043] [2799]: VMCI: host components initialized.
[ 17.257284] [2799]: VMCI: Module registered (name=vmci, major=10, minor=58).
[ 17.257292] [2799]: VMCI: Using host personality
[ 17.257298] [2799]: VMCI: Module (name=vmci) is initialized
[ 18.116228] Bluetooth: Core ver 2.16
[ 18.116275] NET: Registered protocol family 31
[ 18.116281] Bluetooth: HCI device and connection manager initialized
[ 18.116289] Bluetooth: HCI socket layer initialized
[ 18.116294] Bluetooth: L2CAP socket layer initialized
[ 18.116306] Bluetooth: SCO socket layer initialized
[ 18.152676] Bluetooth: RFCOMM TTY layer initialized
[ 18.152689] Bluetooth: RFCOMM socket layer initialized
[ 18.152695] Bluetooth: RFCOMM ver 1.11
[ 18.284668] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.284677] Bluetooth: BNEP filters: protocol multicast
[ 18.413388] lp0: using parport0 (interrupt-driven).
[ 18.457269] ppdev: user-space parallel port driver
[ 19.932454] /dev/vmnet: open called by PID 3108 (vmnet-bridge)
[ 19.932472] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 19.932527] /dev/vmnet: port on hub 0 successfully opened
[ 19.932552] bridge-eth0: up
[ 19.932558] bridge-eth0: attached
[ 20.492714] /dev/vmnet: open called by PID 3141 (vmnet-netifup)
[ 20.492734] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 20.492790] /dev/vmnet: port on hub 1 successfully opened
[ 20.954841] /dev/vmnet: open called by PID 3150 (vmnet-dhcpd)
[ 20.954867] /dev/vmnet: port on hub 1 successfully opened
[ 21.168538] /dev/vmnet: open called by PID 3179 (vmnet-natd)
[ 21.168559] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 21.168615] /dev/vmnet: port on hub 8 successfully opened
[ 21.182189] userif-3: sent link down event.
[ 21.182198] userif-3: sent link up event.
[ 21.285941] /dev/vmnet: open called by PID 3185 (vmnet-netifup)
[ 21.285967] /dev/vmnet: port on hub 8 successfully opened
[ 23.005473] /dev/vmnet: open called by PID 3190 (vmnet-dhcpd)
[ 23.005502] /dev/vmnet: port on hub 8 successfully opened
[ 26.928031] eth0: no IPv6 routers present
[ 31.488099] vmnet1: no IPv6 routers present
[ 31.888082] vmnet8: no IPv6 routers present

[ 0.552622] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.552624] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
[ 0.552626] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
[ 0.552628] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
[ 0.552630] pci_bus 0000:02: resource 7 [io 0x1778-0xffff]
[ 0.552631] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.552633] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.552635] pci_bus 0000:02: resource 10 [mem 0xd0000000-0xffffffff]
[ 0.552638] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.552640] pci_bus 0000:04: resource 2 [mem 0xdc100000-0xdc1fffff 64bit pref]
[ 0.552808] NET: Registered protocol family 2
[ 0.552911] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.553212] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.553629] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.553844] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.553847] TCP reno registered
[ 0.553849] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.553858] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.553962] NET: Registered protocol family 1
[ 1.612486] pci 0000:01:00.0: Boot video device
[ 1.612515] PCI: CLS 64 bytes, default 64
[ 1.612572] Unpacking initramfs...
[ 1.830902] Freeing initrd memory: 10488k freed
[ 1.834111] perf: AMD IBS detected (0x000000ff)
[ 1.834414] audit: initializing netlink socket (disabled)
[ 1.834426] type=2000 audit(1403464708.828:1): initialized
[ 1.846435] highmem bounce pool size: 64 pages
[ 1.846441] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.847685] VFS: Disk quotas dquot_6.5.2
[ 1.847732] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.847813] msgmni has been set to 1626
[ 1.848120] alg: No test for stdrng (krng)
[ 1.848170] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.848174] io scheduler noop registered
[ 1.848176] io scheduler deadline registered
[ 1.848197] io scheduler cfq registered (default)
[ 1.848279] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.848324] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.848385] pcieport 0000:00:15.0: setting latency timer to 64
[ 1.848431] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X
[ 1.848493] pcieport 0000:00:15.1: setting latency timer to 64
[ 1.848538] pcieport 0000:00:15.1: irq 42 for MSI/MSI-X
[ 1.848619] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.848621] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.848623] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 1.848626] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.848642] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.848646] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.848662] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 1.848664] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.848668] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 1.848681] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.848696] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.848697] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.848942] ERST: Table is not found!
[ 1.848943] GHES: HEST is not enabled!
[ 1.848954] isapnp: Scanning for PnP cards...
[ 2.202879] isapnp: No Plug & Play device found
[ 2.203025] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.223379] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.244694] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.264822] Linux agpgart interface v0.103
[ 2.265005] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.265007] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.265384] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.265612] mousedev: PS/2 mouse device common for all mice
[ 2.265655] rtc_cmos 00:06: RTC can wake from S4
[ 2.265838] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.265864] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.265884] cpuidle: using governor ladder
[ 2.265886] cpuidle: using governor menu
[ 2.266106] TCP cubic registered
[ 2.266200] NET: Registered protocol family 10
[ 2.266655] Mobile IPv6
[ 2.266657] NET: Registered protocol family 17
[ 2.266661] Registering the dns_resolver key type
[ 2.266680] Using IPI No-Shortcut mode
[ 2.266969] PM: Hibernation image not present or could not be loaded.
[ 2.266983] registered taskstats version 1
[ 2.267541] rtc_cmos 00:06: setting system clock to 2014-06-22 19:18:30 UTC (1403464710)
[ 2.267604] Initializing network drop monitor service
[ 2.267710] Freeing unused kernel memory: 420k freed
[ 2.267842] Write protecting the kernel text: 2856k
[ 2.267872] Write protecting the kernel read-only data: 1084k
[ 2.267874] NX-protecting the kernel data: 3288k
[ 2.278417] udevd[59]: starting version 175
[ 2.282626] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.295550] SCSI subsystem initialized
[ 2.297416] usbcore: registered new interface driver usbfs
[ 2.297439] usbcore: registered new interface driver hub
[ 2.307414] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.307476] r8169 0000:04:00.0: setting latency timer to 64
[ 2.307555] r8169 0000:04:00.0: irq 43 for MSI/MSI-X
[ 2.307979] r8169 0000:04:00.0: eth0: RTL8168evl/8111evl at 0xf83f6000, c8:60:00:d0:ec:ee, XID 0c900800 IRQ 43
[ 2.307982] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.309834] libata version 3.00 loaded.
[ 2.310317] usbcore: registered new device driver usb
[ 2.310765] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.313508] scsi0 : pata_atiixp
[ 2.316408] scsi1 : pata_atiixp
[ 2.316538] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 2.316541] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 2.316626] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.316652] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.316661] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.316687] QUIRK: Enable AMD PLL fix
[ 2.316698] ehci_hcd 0000:00:12.2: debug port 1
[ 2.316721] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe109000
[ 2.332417] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.332483] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.332491] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.332497] usb usb1: Product: EHCI Host Controller
[ 2.332503] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 2.332508] usb usb1: SerialNumber: 0000:00:12.2
[ 2.333047] hub 1-0:1.0: USB hub found
[ 2.333053] hub 1-0:1.0: 5 ports detected
[ 2.333159] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.333166] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.333173] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.333192] ehci_hcd 0000:00:13.2: debug port 1
[ 2.333205] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe107000
[ 2.344368] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.344455] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.344463] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.344470] usb usb2: Product: EHCI Host Controller
[ 2.344475] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 2.344481] usb usb2: SerialNumber: 0000:00:13.2
[ 2.344643] hub 2-0:1.0: USB hub found
[ 2.344646] hub 2-0:1.0: 5 ports detected
[ 2.344748] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 2.344756] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 2.344762] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.344783] ehci_hcd 0000:00:16.2: debug port 1
[ 2.344797] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe104000
[ 2.344997] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.356382] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.356442] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.356450] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.356457] usb usb3: Product: EHCI Host Controller
[ 2.356463] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 2.356468] usb usb3: SerialNumber: 0000:00:16.2
[ 2.356672] hub 3-0:1.0: USB hub found
[ 2.356678] hub 3-0:1.0: 4 ports detected
[ 2.356878] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.356900] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 2.356928] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe10a000
[ 2.416358] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.416362] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.416364] usb usb4: Product: OHCI Host Controller
[ 2.416366] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 2.416367] usb usb4: SerialNumber: 0000:00:12.0
[ 2.416634] hub 4-0:1.0: USB hub found
[ 2.416642] hub 4-0:1.0: 5 ports detected
[ 2.416734] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.416742] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.416758] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe108000
[ 2.476348] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.476351] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.476354] usb usb5: Product: OHCI Host Controller
[ 2.476355] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 2.476357] usb usb5: SerialNumber: 0000:00:13.0
[ 2.476631] hub 5-0:1.0: USB hub found
[ 2.476639] hub 5-0:1.0: 5 ports detected
[ 2.476730] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.476738] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 2.476753] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe106000
[ 2.536352] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.536355] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.536357] usb usb6: Product: OHCI Host Controller
[ 2.536359] usb usb6: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 2.536360] usb usb6: SerialNumber: 0000:00:14.5
[ 2.536619] hub 6-0:1.0: USB hub found
[ 2.536626] hub 6-0:1.0: 2 ports detected
[ 2.536722] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 2.536730] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 2.536748] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe105000
[ 2.596350] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.596354] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.596356] usb usb7: Product: OHCI Host Controller
[ 2.596357] usb usb7: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 2.596359] usb usb7: SerialNumber: 0000:00:16.0
[ 2.596621] hub 7-0:1.0: USB hub found
[ 2.596629] hub 7-0:1.0: 4 ports detected
[ 2.596822] ahci 0000:00:11.0: version 3.0
[ 2.596951] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.596954] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
[ 2.598115] scsi2 : ahci
[ 2.598183] scsi3 : ahci
[ 2.598244] scsi4 : ahci
[ 2.598337] scsi5 : ahci
[ 2.598561] ata3: SATA max UDMA/133 abar m2048@0xfe10b000 port 0xfe10b100 irq 19
[ 2.598564] ata4: SATA max UDMA/133 abar m2048@0xfe10b000 port 0xfe10b180 irq 19
[ 2.598567] ata5: SATA max UDMA/133 abar m2048@0xfe10b000 port 0xfe10b200 irq 19
[ 2.598570] ata6: SATA max UDMA/133 abar m2048@0xfe10b000 port 0xfe10b280 irq 19
[ 2.644406] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.781822] usb 1-1: New USB device found, idVendor=1a40, idProduct=0201
[ 2.781833] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.781840] usb 1-1: Product: USB 2.0 Hub [MTT]
[ 2.782203] hub 1-1:1.0: USB hub found
[ 2.782332] hub 1-1:1.0: 7 ports detected
[ 2.832374] Refined TSC clocksource calibration: 2796.520 MHz.
[ 2.832389] Switching to clocksource tsc
[ 2.892062] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[ 2.916431] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.032041] usb 1-2: New USB device found, idVendor=04b8, idProduct=011c
[ 3.032051] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.032058] usb 1-2: Product: EPSON Scanner
[ 3.032063] usb 1-2: Manufacturer: EPSON
[ 3.088368] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.088418] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.088468] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.089580] ata3.00: ATA-8: Hitachi HDS721050CLA362, JP2OA50E, max UDMA/133
[ 3.089584] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.089761] ata6.00: ATA-8: ST1000DM003-1CH162, CC46, max UDMA/133
[ 3.089769] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.090503] ata3.00: configured for UDMA/133
[ 3.090619] ata6.00: configured for UDMA/133
[ 3.090726] ata4.00: ATAPI: ATAPI iHAS122 C, XL05, max UDMA/100
[ 3.090783] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
[ 3.091612] ata4.00: configured for UDMA/100
[ 3.093837] scsi 3:0:0:0: CD-ROM ATAPI iHAS122 C XL05 PQ: 0 ANSI: 5
[ 3.094484] scsi 5:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC46 PQ: 0 ANSI: 5
[ 3.097766] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.097798] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.097802] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 3.097846] sd 2:0:0:0: [sda] Write Protect is off
[ 3.097848] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.097926] sd 5:0:0:0: [sdb] Write Protect is off
[ 3.097930] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.097935] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.097956] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.101358] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.101368] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.101603] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.105423] sda: sda1 sda2 sda3
[ 3.106339] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.114393] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.114506] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 3.114559] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 3.128506] sdb: sdb2 < sdb5 > sdb3 sdb4
[ 3.129429] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 3.352120] usb 5-1: new low-speed USB device number 2 using ohci_hcd
[ 3.520735] usb 5-1: New USB device found, idVendor=04b4, idProduct=0033
[ 3.520746] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.531706] input: HID 04b4:0033 as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input1
[ 3.532048] generic-usb 0003:04B4:0033.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b4:0033] on usb-0000:00:13.0-1/input0
[ 3.532073] usbcore: registered new interface driver usbhid
[ 3.532074] usbhid: USB HID core driver
[ 3.593316] usb 1-1.1: new full-speed USB device number 4 using ehci_hcd
[ 3.603874] device-mapper: uevent: version 1.0.3
[ 3.604036] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.694356] usb 1-1.1: New USB device found, idVendor=093a, idProduct=2627
[ 3.694366] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.888239] PM: Starting manual resume from disk
[ 3.888242] PM: Hibernation image partition 254:1 present
[ 3.888244] PM: Looking for hibernation image.
[ 3.889557] PM: Image not found (code -22)
[ 3.889566] PM: Hibernation image not present or could not be loaded.
[ 3.941017] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.023123] udevd[425]: starting version 175
[ 5.475419] wmi: Mapper loaded
[ 5.494444] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 5.625294] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 5.628186] asus_wmi: ASUS WMI generic driver loaded
[ 5.632611] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 5.632752] ACPI: Power Button [PWRB]
[ 5.632818] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.632852] ACPI: Power Button [PWRF]
[ 5.642767] ACPI: acpi_idle registered with cpuidle
[ 5.669422] asus_wmi: Initialization: 0x0
[ 5.669442] asus_wmi: BIOS WMI version: 0.9
[ 5.669476] asus_wmi: SFUN value: 0x0
[ 5.669702] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
[ 5.793946] powernow-k8: Found 1 AMD Athlon(tm) II X4 641 Quad-Core Processor (4 cpu cores) (version 2.20.00)
[ 5.794026] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 5.794028] powernow-k8: 1 : pstate 1 (2500 MHz)
[ 5.794029] powernow-k8: 2 : pstate 2 (2200 MHz)
[ 5.794031] powernow-k8: 3 : pstate 3 (2000 MHz)
[ 5.794033] powernow-k8: 4 : pstate 4 (1800 MHz)
[ 5.794034] powernow-k8: 5 : pstate 5 (1400 MHz)
[ 5.794036] powernow-k8: 6 : pstate 6 (1100 MHz)
[ 5.794037] powernow-k8: 7 : pstate 7 (800 MHz)
[ 5.842158] parport_pc 00:04: reported by Plug and Play ACPI
[ 5.842216] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 6.103412] nvidia: module license 'NVIDIA' taints kernel.
[ 6.103422] Disabling lock debugging due to kernel taint
[ 6.641772] nvidia 0000:01:00.0: setting latency timer to 64
[ 6.641786] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.642046] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.117 Tue Nov 26 21:36:39 PST 2013
[ 6.692038] hda_codec: ALC887-VD: BIOS auto-probing.
[ 6.702913] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 6.706861] hda_intel: Disabling MSI
[ 6.706941] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 7.584364] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 7.616440] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 7.648115] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 7.680108] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 7.696620] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
[ 7.697035] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
[ 7.697472] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
[ 7.697796] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[ 10.568873] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 10.769351] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 10.854253] loop: module loaded
[ 11.578252] Adding 5472252k swap on /dev/mapper/vg_centos-lv_swap. Priority:-1 extents:1 across:5472252k
[ 11.880624] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 11.967798] fuse init (API version 7.17)
[ 13.866380] RPC: Registered named UNIX socket transport module.
[ 13.866389] RPC: Registered udp transport module.
[ 13.866394] RPC: Registered tcp transport module.
[ 13.866399] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.922560] FS-Cache: Loaded
[ 14.029632] FS-Cache: Netfs 'nfs' registered for caching
[ 14.055414] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.186820] r8169 0000:04:00.0: firmware: agent aborted loading rtl_nic/rtl8168e-3.fw (not found?)
[ 14.187088] r8169 0000:04:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[ 14.197041] r8169 0000:04:00.0: eth0: link down
[ 14.197098] r8169 0000:04:00.0: eth0: link down
[ 14.197426] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.016690] r8169 0000:04:00.0: eth0: link up
[ 16.017035] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.192963] /dev/vmmon[2788]: Module vmmon: registered with major=10 minor=165
[ 17.192979] /dev/vmmon[2788]: Module vmmon: initialized
[ 17.256949] [2799]: VMCI: shared components initialized.
[ 17.257043] [2799]: VMCI: host components initialized.
[ 17.257284] [2799]: VMCI: Module registered (name=vmci, major=10, minor=58).
[ 17.257292] [2799]: VMCI: Using host personality
[ 17.257298] [2799]: VMCI: Module (name=vmci) is initialized
[ 18.116228] Bluetooth: Core ver 2.16
[ 18.116275] NET: Registered protocol family 31
[ 18.116281] Bluetooth: HCI device and connection manager initialized
[ 18.116289] Bluetooth: HCI socket layer initialized
[ 18.116294] Bluetooth: L2CAP socket layer initialized
[ 18.116306] Bluetooth: SCO socket layer initialized
[ 18.152676] Bluetooth: RFCOMM TTY layer initialized
[ 18.152689] Bluetooth: RFCOMM socket layer initialized
[ 18.152695] Bluetooth: RFCOMM ver 1.11
[ 18.284668] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.284677] Bluetooth: BNEP filters: protocol multicast
[ 18.413388] lp0: using parport0 (interrupt-driven).
[ 18.457269] ppdev: user-space parallel port driver
[ 19.932454] /dev/vmnet: open called by PID 3108 (vmnet-bridge)
[ 19.932472] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 19.932527] /dev/vmnet: port on hub 0 successfully opened
[ 19.932552] bridge-eth0: up
[ 19.932558] bridge-eth0: attached
[ 20.492714] /dev/vmnet: open called by PID 3141 (vmnet-netifup)
[ 20.492734] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 20.492790] /dev/vmnet: port on hub 1 successfully opened
[ 20.954841] /dev/vmnet: open called by PID 3150 (vmnet-dhcpd)
[ 20.954867] /dev/vmnet: port on hub 1 successfully opened
[ 21.168538] /dev/vmnet: open called by PID 3179 (vmnet-natd)
[ 21.168559] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 21.168615] /dev/vmnet: port on hub 8 successfully opened
[ 21.182189] userif-3: sent link down event.
[ 21.182198] userif-3: sent link up event.
[ 21.285941] /dev/vmnet: open called by PID 3185 (vmnet-netifup)
[ 21.285967] /dev/vmnet: port on hub 8 successfully opened
[ 23.005473] /dev/vmnet: open called by PID 3190 (vmnet-dhcpd)
[ 23.005502] /dev/vmnet: port on hub 8 successfully opened
[ 26.928031] eth0: no IPv6 routers present
[ 31.488099] vmnet1: no IPv6 routers present
[ 31.888082] vmnet8: no IPv6 routers present
root@debian:/home/andrey# clear

root@debian:/home/andrey# lsmod
Module Size Used by
vmnet 37702 13
ppdev 12651 0
lp 12797 0
bnep 17288 2
rfcomm 28626 0
bluetooth 103791 10 rfcomm,bnep
vsock 37705 0
vmci 54772 1 vsock
vmmon 55844 0
binfmt_misc 12813 1
nfsd 173890 2
nfs 265953 0
nfs_acl 12463 2 nfs,nfsd
auth_rpcgss 32143 2 nfs,nfsd
fscache 31978 1 nfs
lockd 61373 2 nfs,nfsd
sunrpc 143904 6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd
fuse 52144 11
loop 17810 0
snd_hda_codec_hdmi 26352 4
snd_oxygen 18910 2
snd_oxygen_lib 27905 1 snd_oxygen
snd_mpu401_uart 13299 1 snd_oxygen_lib
snd_seq_midi 12744 0
snd_seq_midi_event 13124 1 snd_seq_midi
snd_hda_codec_realtek 142267 1
snd_rawmidi 22472 2 snd_seq_midi,snd_mpu401_uart
nvidia 10246037 54
snd_hda_intel 21786 0
snd_hda_codec 63477 3 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
snd_hwdep 12943 1 snd_hda_codec
snd_pcm 53461 4 snd_hda_codec,snd_hda_intel,snd_oxygen_lib,snd_hda_codec_hdmi
snd_page_alloc 12867 2 snd_pcm,snd_hda_intel
snd_seq 39512 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 13016 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 22356 2 snd_seq,snd_pcm
snd 42722 17 snd_timer,snd_seq_device,snd_seq,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_rawmidi,snd_hda_codec_realtek,snd_mpu401_uart,snd_oxygen_lib,snd_oxygen,snd_hda_codec_hdmi
parport_pc 22036 1
powernow_k8 17379 0
mperf 12421 1 powernow_k8
soundcore 12921 1 snd
eeepc_wmi 12508 0
processor 27565 5 powernow_k8
button 12817 0
asus_wmi 18278 1 eeepc_wmi
k10temp 12539 0
i2c_piix4 12480 0
i2c_core 19116 2 i2c_piix4,nvidia
sparse_keymap 12680 1 asus_wmi
evdev 17225 14
parport 31254 3 parport_pc,lp,ppdev
rfkill 18516 4 asus_wmi,bluetooth
thermal_sys 17752 1 processor
pcspkr 12515 0
wmi 13051 1 asus_wmi
ext4 306996 2
crc16 12327 2 ext4,bluetooth
jbd2 52330 1 ext4
mbcache 12938 1 ext4
dm_mod 57362 9
usbhid 31554 0
hid 64284 1 usbhid
sg 21476 0
sr_mod 17468 0
sd_mod 35425 7
cdrom 34813 1 sr_mod
crc_t10dif 12332 1 sd_mod
ahci 24917 5
ata_generic 12439 0
ohci_hcd 22059 0
libahci 18373 1 ahci
ehci_hcd 39631 0
pata_atiixp 12648 0
r8169 41830 0
mii 12595 1 r8169
libata 125014 4 pata_atiixp,libahci,ata_generic,ahci
usbcore 104555 4 ehci_hcd,ohci_hcd,usbhid
scsi_mod 135037 4 libata,sd_mod,sr_mod,sg
usb_common 12338 1 usbcore