LinuxForum.Fans
Тема

Установка wheezy на ноутбук проходит, но система не запускается

Автор: Neuro75 6 сообщений 2510 просмотров
#383814

Доброго времени дня.
Устанавливаю Debian 7.5.0 на ноутбук Dell Inspiron 7537 (на борту NVidia GeForce GT 750M и Intel HD Graphics). Установка проходит без ошибок, однако при запуске системы она доходит до момента когда на экране на долю секунды моргает приглашение ввести login, а потом - черный экран с моргающим в углу курсором.
Судя по надписи "Server terminated with error (1). Closing log file." в конце Xorg0.log, мне кажется что не может стартовать X-сервер. Однако знаний как это побороть не хватает.
Вывод Xorg0.log:

Показать

[ 58.422]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 58.422] X Protocol Version 11, Revision 0
[ 58.422] Build Operating System: Linux 3.11-2-amd64 x86_64 Debian
[ 58.422] Current Operating System: Linux homestation 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3 x86_64
[ 58.422] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=0836eeee-04c1-486b-81f6-b74ea2cf0450 ro single
[ 58.422] Build Date: 17 December 2013 07:37:58PM
[ 58.422] xorg-server 2:1.12.4-6+deb7u2 (Julien Cristau <jcristau@debian.org>)
[ 58.422] Current version of pixman: 0.26.0
[ 58.422] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 58.422] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 58.423] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 15 14:00:09 2014
[ 58.481] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 58.532] (==) No Layout section. Using the first Screen section.
[ 58.532] (==) No screen section available. Using defaults.
[ 58.532] (**) |-->Screen "Default Screen Section" (0)
[ 58.532] (**) | |-->Monitor "<default monitor>"
[ 58.533] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 58.533] (==) Automatically adding devices
[ 58.533] (==) Automatically enabling devices
[ 58.909] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 58.909] Entry deleted from font path.
[ 58.926] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 58.926] Entry deleted from font path.
[ 58.926] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 58.926] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 58.926] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 58.926] (II) Loader magic: 0x7f313623eae0
[ 58.926] (II) Module ABI versions:
[ 58.926] X.Org ANSI C Emulation: 0.4
[ 58.926] X.Org Video Driver: 12.1
[ 58.926] X.Org XInput driver : 16.0
[ 58.926] X.Org Server Extension : 6.0
[ 58.926] (--) PCI:*(0:0:2:0) 8086:0a16:1028:05fa rev 9, Mem @ 0xe3000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
[ 58.926] (--) PCI: (0:4:0:0) 10de:0fe4:1028:05fa rev 161, Mem @ 0xe2000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x00003000/128
[ 58.926] (II) Open ACPI successful (/var/run/acpid.socket)
[ 58.926] (II) LoadModule: "extmod"
[ 58.951] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 58.973] (II) Module extmod: vendor="X.Org Foundation"
[ 58.973] compiled for 1.12.4, module version = 1.0.0
[ 58.973] Module class: X.Org Server Extension
[ 58.973] ABI class: X.Org Server Extension, version 6.0
[ 58.973] (II) Loading extension SELinux
[ 58.973] (II) Loading extension MIT-SCREEN-SAVER
[ 58.973] (II) Loading extension XFree86-VidModeExtension
[ 58.973] (II) Loading extension XFree86-DGA
[ 58.973] (II) Loading extension DPMS
[ 58.973] (II) Loading extension XVideo
[ 58.973] (II) Loading extension XVideo-MotionCompensation
[ 58.973] (II) Loading extension X-Resource
[ 58.973] (II) LoadModule: "dbe"
[ 58.973] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 59.024] (II) Module dbe: vendor="X.Org Foundation"
[ 59.033] compiled for 1.12.4, module version = 1.0.0
[ 59.033] Module class: X.Org Server Extension
[ 59.033] ABI class: X.Org Server Extension, version 6.0
[ 59.033] (II) Loading extension DOUBLE-BUFFER
[ 59.033] (II) LoadModule: "glx"
[ 59.034] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 59.058] (II) Module glx: vendor="X.Org Foundation"
[ 59.058] compiled for 1.12.4, module version = 1.0.0
[ 59.058] ABI class: X.Org Server Extension, version 6.0
[ 59.058] (==) AIGLX enabled
[ 59.058] (II) Loading extension GLX
[ 59.058] (II) LoadModule: "record"
[ 59.059] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 59.059] (II) Module record: vendor="X.Org Foundation"
[ 59.059] compiled for 1.12.4, module version = 1.13.0
[ 59.059] Module class: X.Org Server Extension
[ 59.059] ABI class: X.Org Server Extension, version 6.0
[ 59.059] (II) Loading extension RECORD
[ 59.059] (II) LoadModule: "dri"
[ 59.059] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 59.068] (II) Module dri: vendor="X.Org Foundation"
[ 59.068] compiled for 1.12.4, module version = 1.0.0
[ 59.068] ABI class: X.Org Server Extension, version 6.0
[ 59.069] (II) Loading extension XFree86-DRI
[ 59.069] (II) LoadModule: "dri2"
[ 59.069] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 59.069] (II) Module dri2: vendor="X.Org Foundation"
[ 59.069] compiled for 1.12.4, module version = 1.2.0
[ 59.070] ABI class: X.Org Server Extension, version 6.0
[ 59.070] (II) Loading extension DRI2
[ 59.070] (==) Matched intel as autoconfigured driver 0
[ 59.070] (==) Matched vesa as autoconfigured driver 1
[ 59.070] (==) Matched fbdev as autoconfigured driver 2
[ 59.070] (==) Assigned the driver to the xf86ConfigLayout
[ 59.070] (II) LoadModule: "intel"
[ 59.070] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 59.103] (II) Module intel: vendor="X.Org Foundation"
[ 59.103] compiled for 1.12.3.902, module version = 2.19.0
[ 59.103] Module class: X.Org Video Driver
[ 59.103] ABI class: X.Org Video Driver, version 12.1
[ 59.103] (II) LoadModule: "vesa"
[ 59.103] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 59.117] (II) Module vesa: vendor="X.Org Foundation"
[ 59.117] compiled for 1.12.1, module version = 2.3.1
[ 59.117] Module class: X.Org Video Driver
[ 59.117] ABI class: X.Org Video Driver, version 12.0
[ 59.117] (II) LoadModule: "fbdev"
[ 59.117] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 59.131] (II) Module fbdev: vendor="X.Org Foundation"
[ 59.131] compiled for 1.12.1, module version = 0.4.2
[ 59.131] ABI class: X.Org Video Driver, version 12.0
[ 59.131] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[ 59.132] (II) VESA: driver for VESA chipsets: vesa
[ 59.132] (II) FBDEV: driver for framebuffer: fbdev
[ 59.132] (++) using VT number 7

[ 59.132] (WW) Falling back to old probe method for fbdev
[ 59.132] (II) Loading sub module "fbdevhw"
[ 59.132] (II) LoadModule: "fbdevhw"
[ 59.132] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 59.133] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 59.133] compiled for 1.12.4, module version = 0.0.2
[ 59.133] ABI class: X.Org Video Driver, version 12.1
[ 59.133] (II) Loading sub module "vbe"
[ 59.133] (II) LoadModule: "vbe"
[ 59.174] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 59.175] (II) Module vbe: vendor="X.Org Foundation"
[ 59.175] compiled for 1.12.4, module version = 1.1.0
[ 59.175] ABI class: X.Org Video Driver, version 12.1
[ 59.175] (II) Loading sub module "int10"
[ 59.175] (II) LoadModule: "int10"
[ 59.175] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 59.192] (II) Module int10: vendor="X.Org Foundation"
[ 59.192] compiled for 1.12.4, module version = 1.0.0
[ 59.192] ABI class: X.Org Video Driver, version 12.1
[ 59.192] (II) VESA(0): initializing int10
[ 59.192] (EE) VESA(0): V_BIOS address 0xd00 out of range
[ 59.192] (II) UnloadModule: "vesa"
[ 59.192] (II) UnloadSubModule: "int10"
[ 59.192] (II) Unloading int10
[ 59.192] (II) UnloadSubModule: "vbe"
[ 59.192] (II) Unloading vbe
[ 59.192] (EE) Screen(s) found, but none have a usable configuration.
[ 59.192]
Fatal server error:
[ 59.192] no screens found
[ 59.192]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 59.192] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 59.192]
[ 59.216] Server terminated with error (1). Closing log file.

Вывод dmesq:

Показать

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.57-3
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=0836eeee-04c1-486b-81f6-b74ea2cf0450 ro single
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000058000 (usable)
[ 0.000000] BIOS-e820: 0000000000058000 - 0000000000059000 (reserved)
[ 0.000000] BIOS-e820: 0000000000059000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009d000 - 00000000000c0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000a3081000 (usable)
[ 0.000000] BIOS-e820: 00000000a3081000 - 00000000a3283000 (reserved)
[ 0.000000] BIOS-e820: 00000000a3283000 - 00000000ba6f9000 (usable)
[ 0.000000] BIOS-e820: 00000000ba6f9000 - 00000000bceeb000 (reserved)
[ 0.000000] BIOS-e820: 00000000bceeb000 - 00000000bcf9d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bcf9d000 - 00000000bcfff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bcfff000 - 00000000bd000000 (usable)
[ 0.000000] BIOS-e820: 00000000bd000000 - 00000000bfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f80f8000 - 00000000f80f9000 (reserved)
[ 0.000000] BIOS-e820: 00000000fe101000 - 00000000fe113000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001bf600000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] EFI v2.31 by Phoenix Technologies Ltd.
[ 0.000000] ACPI=0xbcffe000 ACPI 2.0=0xbcffe014 SMBIOS=0xbcc4b000
[ 0.000000] Kernel-defined memdesc doesn't match the one from EFI!
[ 0.000000] EFI: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000058000) (0MB)
.....
[ 0.000000] EFI: mem42: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. Inspiron 7537/0T3T8M, BIOS A09 04/28/2014
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1bf600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00BE000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 00BD000000 mask 7FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbd000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bd000000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bd000000 page 2M
[ 0.000000] kernel direct mapping tables up to bd000000 @ 1fffe000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001bf600000
[ 0.000000] 0100000000 - 0180000000 page 1G
[ 0.000000] 0180000000 - 01bf600000 page 2M
[ 0.000000] kernel direct mapping tables up to 1bf600000 @ ba1d1000-ba1d3000
[ 0.000000] RAMDISK: 36bf4000 - 375f2000
[ 0.000000] ACPI: RSDP 00000000bcffe014 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000bcffe170 000CC (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FACP 00000000bcffb000 0010C (v05 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-288)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe0Block: 256/0 (20110623/tbfadt-529)
[ 0.000000] ACPI: DSDT 00000000bcfe9000 0DB67 (v02 DELL HSW-LPT 00000000 INTL 20120711)
[ 0.000000] ACPI: FACS 00000000bcf9a000 00040
[ 0.000000] ACPI: ASF! 00000000bcffd000 000A5 (v32 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: HPET 00000000bcffa000 00038 (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: LPIT 00000000bcff9000 00094 (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: APIC 00000000bcff8000 00098 (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: MCFG 00000000bcff7000 0003C (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 00000000bcfe8000 00228 (v01 DELL sensrhub 00000000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000bcfe5000 02028 (v01 DELL PtidDevc 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000bcfe4000 00494 (v01 DELL Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000bcfe3000 00AD8 (v01 DELL CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000bcfdf000 0355E (v01 DELL SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: UEFI 00000000bcfde000 00042 (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: MSDM 00000000bcf72000 00055 (v03 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: UEFI 00000000bcfdd000 0003E (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FPDT 00000000bcfdc000 00064 (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SLIC 00000000bcfdb000 00176 (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 00000000bcfd9000 01049 (v01 NvORef NvUltTbl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000bcfd8000 008CA (v01 DELL IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: UEFI 00000000bcfd7000 002CE (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: BGRT 00000000bcfd6000 00038 (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: CSRT 00000000bcfd5000 000C4 (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001bf600000
[ 0.000000] Initmem setup node 0 0000000000000000-00000001bf600000
[ 0.000000] NODE_DATA [00000001bf5fb000 - 00000001bf5fffff]
[ 0.000000] [ffffea0000000000-ffffea00061fffff] PMD -> [ffff8801b8c00000-ffff8801bdffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001bf600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000058
[ 0.000000] 0: 0x00000059 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000a3081
[ 0.000000] 0: 0x000a3283 -> 0x000ba6f9
[ 0.000000] 0: 0x000bcfff -> 0x000bd000
[ 0.000000] 0: 0x00100000 -> 0x001bf600
[ 0.000000] On node 0 totalpages: 1546884
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3918 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 744752 pages, LIFO batch:31
[ 0.000000] Normal zone: 10717 pages used for memmap
[ 0.000000] Normal zone: 773155 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: 0000000000058000 - 0000000000059000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000c0000
[ 0.000000] PM: Registered nosave memory: 00000000000c0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000a3081000 - 00000000a3283000
[ 0.000000] PM: Registered nosave memory: 00000000ba6f9000 - 00000000bceeb000
[ 0.000000] PM: Registered nosave memory: 00000000bceeb000 - 00000000bcf9d000
[ 0.000000] PM: Registered nosave memory: 00000000bcf9d000 - 00000000bcfff000
[ 0.000000] PM: Registered nosave memory: 00000000bd000000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f80f8000
[ 0.000000] PM: Registered nosave memory: 00000000f80f8000 - 00000000f80f9000
[ 0.000000] PM: Registered nosave memory: 00000000f80f9000 - 00000000fe101000
[ 0.000000] PM: Registered nosave memory: 00000000fe101000 - 00000000fe113000
[ 0.000000] PM: Registered nosave memory: 00000000fe113000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:386f8000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801bf200000 s82944 r8192 d23552 u262144
[ 0.000000] pcpu-alloc: s82944 r8192 d23552 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1521825
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=0836eeee-04c1-486b-81f6-b74ea2cf0450 ro single
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5950216k/7329792k available (3428k kernel code, 1142256k absent, 237320k reserved, 3310k data, 580k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:1016 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 1596.239 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.47 BogoMIPS (lpj=6384956)
[ 0.000011] pid_max: default: 32768 minimum: 301
[ 0.034890] Security Framework initialized
[ 0.034899] AppArmor: AppArmor disabled by boot time parameter
[ 0.035575] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.037587] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.038430] Mount-cache hash table entries: 256
[ 0.038555] Initializing cgroup subsys cpuacct
[ 0.038562] Initializing cgroup subsys memory
[ 0.038575] Initializing cgroup subsys devices
[ 0.038578] Initializing cgroup subsys freezer
[ 0.038581] Initializing cgroup subsys net_cls
[ 0.038585] Initializing cgroup subsys blkio
[ 0.038594] Initializing cgroup subsys perf_event
[ 0.038648] CPU: Physical Processor ID: 0
[ 0.038651] CPU: Processor Core ID: 0
[ 0.038658] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.038659] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.039940] mce: CPU supports 7 MCE banks
[ 0.039959] CPU0: Thermal monitoring enabled (TM1)
[ 0.039972] using mwait in idle threads.
[ 0.040433] ACPI: Core revision 20110623
[ 0.057346] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.097004] CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz stepping 01
[ 0.202506] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
[ 0.202516] ... version: 3
[ 0.202519] ... bit width: 48
[ 0.202522] ... generic registers: 4
[ 0.202524] ... value mask: 0000ffffffffffff
[ 0.202528] ... max period: 000000007fffffff
[ 0.202531] ... fixed-purpose events: 3
[ 0.202533] ... event mask: 000000070000000f
[ 0.202695] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.202808] Booting Node 0, Processors #1
[ 0.202812] smpboot cpu 1: start_ip = 98000
[ 0.311875] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.312000] #2
[ 0.312003] smpboot cpu 2: start_ip = 98000
[ 0.423782] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.423891] #3
[ 0.423894] smpboot cpu 3: start_ip = 98000
[ 0.535669] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.535699] Brought up 4 CPUs
[ 0.535703] Total of 4 processors activated (12770.34 BogoMIPS).
[ 0.541048] devtmpfs: initialized
[ 0.544461] PM: Registering ACPI NVS region at bceeb000 (729088 bytes)
[ 0.544652] print_constraints: dummy:
[ 0.544727] NET: Registered protocol family 16
[ 0.544834] ACPI: bus type pci registered
[ 0.544926] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.544932] PCI: not using MMCONFIG
[ 0.544935] PCI: Using configuration type 1 for base access
[ 0.546080] bio: create slab <bio-0> at 0
[ 0.546199] ACPI: Added _OSI(Module Device)
[ 0.546203] ACPI: Added _OSI(Processor Device)
[ 0.546206] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.546210] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.549087] ACPI: EC: Look up EC in DSDT
[ 0.552321] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.557734] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.595194] ACPI: SSDT 00000000bcedec18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.595912] ACPI: Dynamic OEM Table Load:
[ 0.595917] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.606593] ACPI: SSDT 00000000bcede618 005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.607427] ACPI: Dynamic OEM Table Load:
[ 0.607432] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.618361] ACPI: SSDT 00000000bce90d98 00119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.619069] ACPI: Dynamic OEM Table Load:
[ 0.619073] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.631230] ACPI: Interpreter enabled
[ 0.631237] ACPI: (supports S0 S3 S4 S5)
[ 0.631284] ACPI: Using IOAPIC for interrupt routing
[ 0.631313] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.632041] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.687409] ACPI: No dock devices found.
[ 0.687414] HEST: Table not found.
[ 0.687419] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.687711] \_SB_.PCI0:_OSC invalid UUID
[ 0.687713] _OSC request data:1 8 0
[ 0.687718] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.688150] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.688155] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.688159] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.688164] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.688168] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.688172] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.688176] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.688181] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.688185] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.688189] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.688193] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.688198] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.688202] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.688206] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.688210] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.688215] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff]
[ 0.688235] pci 0000:00:00.0: [8086:0a04] type 0 class 0x000600
[ 0.688286] pci 0000:00:02.0: [8086:0a16] type 0 class 0x000300
[ 0.688302] pci 0000:00:02.0: reg 10: [mem 0xe3000000-0xe33fffff 64bit]
[ 0.688311] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.688318] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f]
[ 0.688362] pci 0000:00:03.0: [8086:0a0c] type 0 class 0x000403
[ 0.688373] pci 0000:00:03.0: reg 10: [mem 0xe3610000-0xe3613fff 64bit]
[ 0.688447] pci 0000:00:14.0: [8086:9c31] type 0 class 0x000c03
[ 0.688467] pci 0000:00:14.0: reg 10: [mem 0xe3600000-0xe360ffff 64bit]
[ 0.688532] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.688555] pci 0000:00:16.0: [8086:9c3a] type 0 class 0x000780
[ 0.688578] pci 0000:00:16.0: reg 10: [mem 0xe3619000-0xe361901f 64bit]
[ 0.688654] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.688689] pci 0000:00:1b.0: [8086:9c20] type 0 class 0x000403
[ 0.688704] pci 0000:00:1b.0: reg 10: [mem 0xe3614000-0xe3617fff 64bit]
[ 0.688773] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.688795] pci 0000:00:1c.0: [8086:9c10] type 1 class 0x000604
[ 0.688864] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.688888] pci 0000:00:1c.2: [8086:9c14] type 1 class 0x000604
[ 0.688959] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.688982] pci 0000:00:1c.3: [8086:9c16] type 1 class 0x000604
[ 0.689052] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.689076] pci 0000:00:1c.4: [8086:9c18] type 1 class 0x000604
[ 0.689146] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.689179] pci 0000:00:1d.0: [8086:9c26] type 0 class 0x000c03
[ 0.689201] pci 0000:00:1d.0: reg 10: [mem 0xe361d000-0xe361d3ff]
[ 0.689299] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.689328] pci 0000:00:1f.0: [8086:9c43] type 0 class 0x000601
[ 0.689466] pci 0000:00:1f.2: [8086:9c03] type 0 class 0x000106
[ 0.689483] pci 0000:00:1f.2: reg 10: [io 0x5088-0x508f]
[ 0.689491] pci 0000:00:1f.2: reg 14: [io 0x5094-0x5097]
[ 0.689500] pci 0000:00:1f.2: reg 18: [io 0x5080-0x5087]
[ 0.689508] pci 0000:00:1f.2: reg 1c: [io 0x5090-0x5093]
[ 0.689516] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f]
[ 0.689524] pci 0000:00:1f.2: reg 24: [mem 0xe361c000-0xe361c7ff]
[ 0.689564] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.689581] pci 0000:00:1f.3: [8086:9c22] type 0 class 0x000c05
[ 0.689597] pci 0000:00:1f.3: reg 10: [mem 0xe3618000-0xe36180ff 64bit]
[ 0.689619] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.689685] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.689771] pci 0000:02:00.0: [8086:08b1] type 0 class 0x000280
[ 0.689816] pci 0000:02:00.0: reg 10: [mem 0xe3500000-0xe3501fff 64bit]
[ 0.689995] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.694174] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[ 0.694181] pci 0000:00:1c.2: bridge window [mem 0xe3500000-0xe35fffff]
[ 0.694247] pci 0000:03:00.0: [10ec:5287] type 0 class 0x00ff00
[ 0.694265] pci 0000:03:00.0: reg 10: [mem 0xe3405000-0xe3405fff]
[ 0.694334] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[ 0.694403] pci 0000:03:00.0: supports D1 D2
[ 0.694405] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.694455] pci 0000:03:00.1: [10ec:8168] type 0 class 0x000200
[ 0.694473] pci 0000:03:00.1: reg 10: [io 0x4000-0x40ff]
[ 0.694504] pci 0000:03:00.1: reg 18: [mem 0xe3404000-0xe3404fff 64bit]
[ 0.694523] pci 0000:03:00.1: reg 20: [mem 0xe3400000-0xe3403fff 64bit]
[ 0.694602] pci 0000:03:00.1: supports D1 D2
[ 0.694604] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.702158] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.702164] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.702168] pci 0000:00:1c.3: bridge window [mem 0xe3400000-0xe34fffff]
[ 0.702226] pci 0000:04:00.0: [10de:0fe4] type 0 class 0x000302
[ 0.702241] pci 0000:04:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
[ 0.702257] pci 0000:04:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.702273] pci 0000:04:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[ 0.702284] pci 0000:04:00.0: reg 24: [io 0x3000-0x307f]
[ 0.702295] pci 0000:04:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.710146] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.710151] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.710155] pci 0000:00:1c.4: bridge window [mem 0xe2000000-0xe2ffffff]
[ 0.710161] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.710182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.710375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.710451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.710527] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.710603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.710783] \_SB_.PCI0:_OSC invalid UUID
[ 0.710784] _OSC request data:1 1f 0
[ 0.710789] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.710856] \_SB_.PCI0:_OSC invalid UUID
[ 0.710858] _OSC request data:1 0 1d
[ 0.710863] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.710867] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.722277] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.722347] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.722414] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.722480] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.722545] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.722610] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.722674] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.722739] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.722863] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.722876] vgaarb: loaded
[ 0.722879] vgaarb: bridge control possible 0000:00:02.0
[ 0.722925] PCI: Using ACPI for IRQ routing
[ 0.724378] PCI: pci_cache_line_size set to 64 bytes
[ 0.724469] reserve RAM buffer: 0000000000058000 - 000000000005ffff
[ 0.724471] reserve RAM buffer: 000000000009d000 - 000000000009ffff
[ 0.724474] reserve RAM buffer: 00000000a3081000 - 00000000a3ffffff
[ 0.724476] reserve RAM buffer: 00000000ba6f9000 - 00000000bbffffff
[ 0.724479] reserve RAM buffer: 00000000bd000000 - 00000000bfffffff
[ 0.724481] reserve RAM buffer: 00000001bf600000 - 00000001bfffffff
[ 0.724607] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.724617] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.726639] Switching to clocksource hpet
[ 0.728705] pnp: PnP ACPI init
[ 0.728721] ACPI: bus type pnp registered
[ 0.728954] pnp 00:00: [bus 00-3e]
[ 0.728957] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.728959] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.728962] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.728964] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.728967] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.728969] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.728971] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.728973] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.728976] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.728978] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.728980] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.728983] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.728986] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.728988] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.728990] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.728992] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.728995] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.728997] pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
[ 0.729064] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.729088] pnp 00:01: [io 0x0010-0x001f]
[ 0.729090] pnp 00:01: [io 0x0022-0x003f]
[ 0.729092] pnp 00:01: [io 0x0044-0x005f]
[ 0.729094] pnp 00:01: [io 0x0068-0x006f]
[ 0.729096] pnp 00:01: [io 0x0072-0x007f]
[ 0.729098] pnp 00:01: [io 0x0080]
[ 0.729100] pnp 00:01: [io 0x0084-0x0086]
[ 0.729102] pnp 00:01: [io 0x0088]
[ 0.729104] pnp 00:01: [io 0x008c-0x008e]
[ 0.729106] pnp 00:01: [io 0x0090-0x009f]
[ 0.729107] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.729109] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.729111] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.729114] pnp 00:01: [mem 0xfe800000-0xfe802fff]
[ 0.729165] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.729171] system 00:01: [mem 0xfe800000-0xfe802fff] has been reserved
[ 0.729176] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.729194] pnp 00:02: [io 0x0000-0x001f]
[ 0.729196] pnp 00:02: [io 0x0081-0x0091]
[ 0.729198] pnp 00:02: [io 0x0093-0x009f]
[ 0.729200] pnp 00:02: [io 0x00c0-0x00df]
[ 0.729203] pnp 00:02: [dma 4]
[ 0.729230] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.729240] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.729265] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.729379] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.729407] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.729421] pnp 00:05: [io 0x002e-0x002f]
[ 0.729423] pnp 00:05: [io 0x004e-0x004f]
[ 0.729425] pnp 00:05: [io 0x0061]
[ 0.729427] pnp 00:05: [io 0x0063]
[ 0.729429] pnp 00:05: [io 0x0065]
[ 0.729431] pnp 00:05: [io 0x0067]
[ 0.729433] pnp 00:05: [io 0x0070]
[ 0.729435] pnp 00:05: [io 0x0080]
[ 0.729437] pnp 00:05: [io 0x0092]
[ 0.729439] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.729441] pnp 00:05: [io 0x0680-0x069f]
[ 0.729443] pnp 00:05: [io 0xffff]
[ 0.729445] pnp 00:05: [io 0xffff]
[ 0.729446] pnp 00:05: [io 0xffff]
[ 0.729448] pnp 00:05: [io 0x1800-0x18fe]
[ 0.729450] pnp 00:05: [io 0x164e-0x164f]
[ 0.729500] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.729505] system 00:05: [io 0xffff] has been reserved
[ 0.729509] system 00:05: [io 0xffff] has been reserved
[ 0.729513] system 00:05: [io 0xffff] has been reserved
[ 0.729517] system 00:05: [io 0x1800-0x18fe] has been reserved
[ 0.729521] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.729526] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.729558] pnp 00:06: [io 0x0070-0x0077]
[ 0.729567] pnp 00:06: [irq 8]
[ 0.729595] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.729628] pnp 00:07: [io 0x1854-0x1857]
[ 0.729671] system 00:07: [io 0x1854-0x1857] has been reserved
[ 0.729676] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.729738] pnp 00:08: [io 0x0060]
[ 0.729740] pnp 00:08: [io 0x0064]
[ 0.729742] pnp 00:08: [io 0x0062]
[ 0.729744] pnp 00:08: [io 0x0066]
[ 0.729750] pnp 00:08: [irq 1]
[ 0.729807] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.729863] pnp 00:09: [irq 12]
[ 0.729896] pnp 00:09: Plug and Play ACPI device, IDs DLL05f9 SYN0600 SYN0002 PNP0f13 (active)
[ 0.730028] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.730031] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 0.730033] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.730035] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.730037] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
[ 0.730039] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.730041] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 0.730044] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.730046] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.730049] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.730051] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.730054] pnp 00:0a: [mem 0xbfa10000-0xbfa1ffff]
[ 0.730117] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.730122] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.730127] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.730131] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.730136] system 00:0a: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.730141] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.730145] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.730150] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.730155] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.730159] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.730164] system 00:0a: [mem 0xbfa10000-0xbfa1ffff] has been reserved
[ 0.730168] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.730623] pnp 00:0b: [irq 17]
[ 0.730675] pnp 00:0b: Plug and Play ACPI device, IDs SMO8810 (active)
[ 0.739012] pnp: PnP ACPI: found 12 devices
[ 0.739016] ACPI: ACPI bus type pnp unregistered
[ 0.745918] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.745926] pci 0000:04:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.745932] PCI: max bus depth: 1 pci_try_num: 2
[ 0.745969] pci 0000:00:1c.3: BAR 15: assigned [mem 0xbfb00000-0xbfbfffff pref]
[ 0.745974] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.745987] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[ 0.745993] pci 0000:00:1c.2: bridge window [mem 0xe3500000-0xe35fffff]
[ 0.746004] pci 0000:03:00.0: BAR 6: assigned [mem 0xbfb00000-0xbfb0ffff pref]
[ 0.746009] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.746013] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.746020] pci 0000:00:1c.3: bridge window [mem 0xe3400000-0xe34fffff]
[ 0.746026] pci 0000:00:1c.3: bridge window [mem 0xbfb00000-0xbfbfffff pref]
[ 0.746035] pci 0000:04:00.0: BAR 6: can't assign mem pref (size 0x80000)
[ 0.746039] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.746043] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.746050] pci 0000:00:1c.4: bridge window [mem 0xe2000000-0xe2ffffff]
[ 0.746056] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.746080] pci 0000:00:1c.0: setting latency timer to 64
[ 0.746093] pci 0000:00:1c.2: setting latency timer to 64
[ 0.746105] pci 0000:00:1c.3: setting latency timer to 64
[ 0.746114] pci 0000:00:1c.4: setting latency timer to 64
[ 0.746118] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.746121] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.746123] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.746125] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.746128] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.746130] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.746132] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.746135] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.746137] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.746140] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.746142] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.746144] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.746147] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.746149] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.746151] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.746154] pci_bus 0000:00: resource 19 [mem 0xbfa00000-0xfeafffff]
[ 0.746157] pci_bus 0000:02: resource 1 [mem 0xe3500000-0xe35fffff]
[ 0.746159] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.746161] pci_bus 0000:03: resource 1 [mem 0xe3400000-0xe34fffff]
[ 0.746164] pci_bus 0000:03: resource 2 [mem 0xbfb00000-0xbfbfffff pref]
[ 0.746166] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.746169] pci_bus 0000:04: resource 1 [mem 0xe2000000-0xe2ffffff]
[ 0.746171] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.746252] NET: Registered protocol family 2
[ 0.746494] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.747547] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.748938] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.749095] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.749099] TCP reno registered
[ 0.749116] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.749153] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.749290] NET: Registered protocol family 1
[ 0.749307] pci 0000:00:02.0: Boot video device
[ 0.854639] pci 0000:00:14.0: power state changed by ACPI to D0
[ 0.854650] pci 0000:00:14.0: power state changed by ACPI to D0
[ 0.854658] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.854662] pci 0000:00:14.0: PCI INT A: no GSI
[ 0.854714] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.854819] PCI: CLS 64 bytes, default 64
[ 0.854876] Unpacking initramfs...
[ 1.148980] Freeing initrd memory: 10232k freed
[ 1.150413] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.150419] Placing 64MB software IO TLB between ffff8800b61d1000 - ffff8800ba1d1000
[ 1.150424] software IO TLB at phys 0xb61d1000 - 0xba1d1000
[ 1.151026] audit: initializing netlink socket (disabled)
[ 1.151042] type=2000 audit(1402826351.968:1): initialized
[ 1.171630] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.172407] VFS: Disk quotas dquot_6.5.2
[ 1.172446] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.172527] msgmni has been set to 11769
[ 1.172685] alg: No test for stdrng (krng)
[ 1.172723] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.172729] io scheduler noop registered
[ 1.172732] io scheduler deadline registered
[ 1.172760] io scheduler cfq registered (default)
[ 1.173022] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.173047] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.173050] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.173733] efifb: probing for efifb
[ 1.174447] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90005800000, using 4160k, total 4160k
[ 1.174453] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 1.174456] efifb: scrolling: redraw
[ 1.174459] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.178429] Console: switching to colour frame buffer device 170x48
[ 1.182286] fb0: EFI VGA frame buffer device
[ 1.182320] intel_idle: does not run on family 6 model 69
[ 1.182347] ERST: Table is not found!
[ 1.182371] GHES: HEST is not enabled!
[ 1.182458] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.310790] Linux agpgart interface v0.103
[ 1.310967] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.315401] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.315438] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.315594] mousedev: PS/2 mouse device common for all mice
[ 1.315669] rtc_cmos 00:06: RTC can wake from S4
[ 1.315811] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.315876] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.315928] cpuidle: using governor ladder
[ 1.315954] cpuidle: using governor menu
[ 1.316172] TCP cubic registered
[ 1.316265] NET: Registered protocol family 10
[ 1.316770] Mobile IPv6
[ 1.316789] NET: Registered protocol family 17
[ 1.316820] Registering the dns_resolver key type
[ 1.316974] PM: Hibernation image not present or could not be loaded.
[ 1.316983] registered taskstats version 1
[ 1.317823] rtc_cmos 00:06: setting system clock to 2014-06-15 09:59:12 UTC (1402826352)
[ 1.317940] Initializing network drop monitor service
[ 1.319331] Freeing unused kernel memory: 580k freed
[ 1.320661] Write protecting the kernel read-only data: 6144k
[ 1.324768] Freeing unused kernel memory: 652k freed
[ 1.329030] Freeing unused kernel memory: 688k freed
[ 1.339510] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.343564] udevd[57]: starting version 175
[ 1.376810] usbcore: registered new interface driver usbfs
[ 1.384957] SCSI subsystem initialized
[ 1.388082] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.391998] usbcore: registered new interface driver hub
[ 1.395716] r8169 0000:03:00.1: (unregistered net_device): unknown MAC, using family default
[ 1.398075] r8169 0000:03:00.1: setting latency timer to 64
[ 1.405397] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.407798] ACPI: Thermal Zone [THM] (50 C)
[ 1.410253] usbcore: registered new device driver usb
[ 1.411210] r8169 0000:03:00.1: irq 56 for MSI/MSI-X
[ 1.411822] r8169 0000:03:00.1: eth0: RTL8168b/8111b at 0xffffc90000c72000, 78:45:c4:ca:52:2b, XID 1c800800 IRQ 56
[ 1.411828] r8169 0000:03:00.1: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 1.417498] libata version 3.00 loaded.
[ 1.417527] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.420194] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.420202] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.422611] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.424982] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.431305] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.431331] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xe361d000
[ 1.446113] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.447417] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.448715] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.450008] usb usb1: Product: EHCI Host Controller
[ 1.451302] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.452594] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.454018] hub 1-0:1.0: USB hub found
[ 1.455316] hub 1-0:1.0: 3 ports detected
[ 1.456673] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[ 1.459039] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[ 1.460619] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 1.461888] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 1.463184] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.463188] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.464418] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.465729] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.465770] xhci_hcd 0000:00:14.0: irq 57 for MSI/MSI-X
[ 1.465816] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.467086] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.468316] usb usb2: Product: xHCI Host Controller
[ 1.469556] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.470816] usb usb2: SerialNumber: 0000:00:14.0
[ 1.472163] xHCI xhci_add_endpoint called for root hub
[ 1.472165] xHCI xhci_check_bandwidth called for root hub
[ 1.472199] hub 2-0:1.0: USB hub found
[ 1.473450] hub 2-0:1.0: 9 ports detected
[ 1.474784] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.476036] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.477316] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.478593] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.479838] usb usb3: Product: xHCI Host Controller
[ 1.481077] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.482331] usb usb3: SerialNumber: 0000:00:14.0
[ 1.483642] xHCI xhci_add_endpoint called for root hub
[ 1.483644] xHCI xhci_check_bandwidth called for root hub
[ 1.483674] hub 3-0:1.0: USB hub found
[ 1.484922] hub 3-0:1.0: 4 ports detected
[ 1.514068] ahci 0000:00:1f.2: version 3.0
[ 1.514147] ahci 0000:00:1f.2: irq 58 for MSI/MSI-X
[ 1.530050] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 1.531303] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part apst
[ 1.532534] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.533076] scsi0 : ahci
[ 1.534447] scsi1 : ahci
[ 1.535733] scsi2 : ahci
[ 1.536994] scsi3 : ahci
[ 1.538374] ata1: SATA max UDMA/133 abar m2048@0xe361c000 port 0xe361c100 irq 58
[ 1.539545] ata2: DUMMY
[ 1.540677] ata3: DUMMY
[ 1.541787] ata4: DUMMY
[ 1.765863] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.861795] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.863724] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.890305] ata1.00: ATA-8: ST500LT012-1DG142, 0001SDM1, max UDMA/133
[ 1.891387] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.898079] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.899167] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.900510] hub 1-1:1.0: USB hub found
[ 1.901703] hub 1-1:1.0: 8 ports detected
[ 1.905765] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.932256] ata1.00: configured for UDMA/133
[ 1.933461] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 0001 PQ: 0 ANSI: 5
[ 1.938234] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.939396] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.940581] sd 0:0:0:0: [sda] Write Protect is off
[ 1.941677] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.941702] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.002782] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 2.004312] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.007196] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.069645] usb 2-2: new full-speed USB device number 2 using xhci_hcd
[ 2.088010] usb 2-2: New USB device found, idVendor=046d, idProduct=c52b
[ 2.089185] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.090377] usb 2-2: Product: USB Receiver
[ 2.091544] usb 2-2: Manufacturer: Logitech
[ 2.096626] usbcore: registered new interface driver usbhid
[ 2.097874] usbhid: USB HID core driver
[ 2.102621] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
[ 2.104125] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_probe:logi_dj_recv_query_paired_devices error:-32
[ 2.105468] logitech-djreceiver: probe of 0003:046D:C52B.0003 failed with error -32
[ 2.149580] Refined TSC clocksource calibration: 1596.304 MHz.
[ 2.150852] Switching to clocksource tsc
[ 2.257498] usb 2-5: new high-speed USB device number 3 using xhci_hcd
[ 2.371814] usb 2-5: New USB device found, idVendor=0c45, idProduct=6705
[ 2.373115] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.374404] usb 2-5: Product: Integrated_Webcam_HD
[ 2.375664] usb 2-5: Manufacturer: CN0DWGV87248738KM0SEA00
[ 2.553273] usb 2-6: new full-speed USB device number 4 using xhci_hcd
[ 3.618280] PM: Starting manual resume from disk
[ 3.619582] PM: Hibernation image partition 8:6 present
[ 3.619585] PM: Looking for hibernation image.
[ 3.619774] PM: Image not found (code -22)
[ 3.619778] PM: Hibernation image not present or could not be loaded.
[ 3.672424] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.504004] udevd[365]: starting version 175
[ 6.200777] wmi: Mapper loaded
[ 6.213405] ACPI: AC Adapter [AC] (off-line)
[ 6.232862] ACPI: resource 0000:00:1f.3 [io 0xefa0-0xefbf] conflicts with ACPI region SMBI [io 0xefa0-0xefaf]
[ 6.234438] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.320604] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 6.323498] ACPI: Requesting acpi_cpufreq
[ 6.343806] ACPI: Lid Switch [LID0]
[ 6.343815] Monitor-Mwait will be used to enter C-1 state
[ 6.343830] Monitor-Mwait will be used to enter C-2 state
[ 6.343840] Monitor-Mwait will be used to enter C-3 state
[ 6.343857] ACPI: acpi_idle registered with cpuidle
[ 6.345751] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 6.347420] ACPI: Power Button [PWRB]
[ 6.349064] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 6.350905] ACPI: Sleep Button [SBTN]
[ 6.352557] ACPI: Battery Slot [BAT0] (battery absent)
[ 6.352565] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.352570] ACPI: Power Button [PWRF]
[ 6.395731] input: Dell WMI hotkeys as /devices/virtual/input/input5
[ 6.425615] EFI Variables Facility v0.08 2004-May-17
[ 6.430743] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.437004] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.534339] [drm] Initialized drm 1.1.0 20060810
[ 6.594846] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.GFX0 handle
[ 6.596012] nouveau 0000:04:00.0: power state changed by ACPI to D0
[ 6.597109] nouveau 0000:04:00.0: power state changed by ACPI to D0
[ 6.598181] nouveau 0000:04:00.0: enabling device (0006 -> 0007)
[ 6.599427] nouveau 0000:04:00.0: setting latency timer to 64
[ 6.599446] [drm] nouveau 0000:04:00.0: Detected an NVe0 generation card (0x0e7240a2)
[ 6.602504] checking generic (c0000000 410000) vs hw (d0000000 10000000)
[ 6.602508] checking generic (c0000000 410000) vs hw (e0000000 2000000)
[ 6.605933] [drm] nouveau 0000:04:00.0: Checking PRAMIN for VBIOS
[ 6.655624] [drm] nouveau 0000:04:00.0: ... BIOS signature not found
[ 6.656725] [drm] nouveau 0000:04:00.0: Checking PROM for VBIOS
[ 6.657800] [drm] nouveau 0000:04:00.0: ... BIOS signature not found
[ 6.658965] [drm] nouveau 0000:04:00.0: Checking ACPI for VBIOS
[ 6.659494] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 6.847951] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127800
[ 6.885188] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 6.936716] snd_hda_intel 0000:00:03.0: irq 59 for MSI/MSI-X
[ 6.936738] snd_hda_intel 0000:00:03.0: setting latency timer to 64
[ 7.553530] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command
[ 7.757379] xhci_hcd 0000:00:14.0: ERROR no room on ep ring
[ 7.758892] xhci_hcd 0000:00:14.0: ERR: No room for command on command ring
[ 7.939108] [drm] nouveau 0000:04:00.0: ... appears to be valid
[ 7.942095] [drm] nouveau 0000:04:00.0: Using VBIOS from ACPI
[ 7.945009] [drm] nouveau 0000:04:00.0: BIT BIOS found
[ 7.947869] [drm] nouveau 0000:04:00.0: Bios version 80.07.9e.00
[ 7.950683] [drm] nouveau 0000:04:00.0: Pointer to TMDS table invalid
[ 7.954178] [drm] nouveau 0000:04:00.0: MXM: no VBIOS data, nothing to do
[ 7.956967] [drm] nouveau 0000:04:00.0: DCB version 4.0
[ 7.961207] usb 2-6: device not accepting address 4, error -12
[ 7.966542] xhci_hcd 0000:00:14.0: ERROR no room on ep ring
[ 7.970140] xhci_hcd 0000:00:14.0: ERR: No room for command on command ring
[ 7.972127] xhci_hcd 0000:00:14.0: ERROR no room on ep ring
[ 7.973147] xhci_hcd 0000:00:14.0: ERR: No room for command on command ring
[ 7.974085] hub 2-0:1.0: couldn't allocate port 6 usb_device
[ 8.026531] Linux media interface: v0.10
[ 8.052155] Linux video capture interface: v2.00
[ 8.054993] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6705)
[ 8.056266] xhci_hcd 0000:00:14.0: ERROR no room on ep ring
[ 8.057040] xhci_hcd 0000:00:14.0: ERR: No room for command on command ring
[ 8.057844] usb 2-5: Not enough bandwidth for altsetting 0
[ 8.089871] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input8
[ 8.092045] usbcore: registered new interface driver uvcvideo
[ 8.093997] USB Video Class driver (1.1.1)
[ 8.110150] xhci_hcd 0000:00:14.0: ERROR no room on ep ring
[ 8.112644] xhci_hcd 0000:00:14.0: ERR: No room for command on command ring
[ 9.963804] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[ 10.971050] hda-intel: No response from codec, disabling MSI: last cmd=0x000f0000
[ 11.978294] hda-intel: Codec #0 probe error; disabling it...
[ 12.997527] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0001
[ 13.005339] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 13.005384] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 13.077268] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 13.113367] xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command.
[ 13.114646] xhci_hcd 0000:00:14.0: Assuming host is dying, halting host.
[ 13.115647] xhci_hcd 0000:00:14.0: HC died; cleaning up
[ 13.116450] usb 2-2: USB disconnect, device number 2
[ 13.117629] usb 2-5: USB disconnect, device number 3
[ 14.322022] Adding 6187004k swap on /dev/sda6. Priority:-1 extents:1 across:6187004k
[ 14.336465] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 14.766996] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 14.914622] loop: module loaded
[ 15.747861] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 16.804777] RPC: Registered named UNIX socket transport module.
[ 16.805742] RPC: Registered udp transport module.
[ 16.806709] RPC: Registered tcp transport module.
[ 16.807556] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 16.824834] FS-Cache: Loaded
[ 16.860681] FS-Cache: Netfs 'nfs' registered for caching
[ 16.870010] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

Заранее спасибо.

#383819

Neuro75, скажите, имеется ли возможность отключить интерграшку в UEFI/BIOS?

#383829

Это не система "не грузится", а nvidia optimus зверствует. При загрузке надо ядру передать nomodeset, затем установить, как минимум, блоб nvidia, если его наконец научили работать с optimus, или bumblebee, если все еще не научили.

#383830

kirillov3798, нет, вывод изображения, в отличие от рендеринга, идет в любом случае через карту Intel, а вот дискретную карту вполне можно отключить.

#383844

В BIOSе возможность отключения обоих видеокарт отсутствует.


При загрузке надо ядру передать nomodeset, затем установить, как минимум, блоб nvidia, если его наконец научили работать с optimus, или bumblebee, если все еще не научили.

А как это сделать?

#384556

Отвечаю сам себе :-)
Починить так, как сказал уважаемый yars не получилось по причине кривости рук. Нагородил непонятно что в системе, после чего запускаться перестало вообще все :-)
Решилось установкой jessie. В ней Х-сервер после установки запустился.
Потом вместо установленного по умолчанию nouveau поставил проприетарный драйвер как написано здесь: https://wiki.debian.org/ru/NvidiaProprietary (вторым способом) и затем сверху Bumblebee для переключения между картами как написано здесь: https://wiki.debian.org/ru/Bumblebee.
Ну, собственно теперь все работает.
Вопрос: можно ли вообще не использовать встроенный Intel и работать всегда на Nvidia? Если да, то как это реализовать?

Войдите или зарегистрируйтесь, чтобы ответить.