Я поставил Debian Wheezy, wifi установилгUSB card, всё работает. Потом понадобилось hdd переставить в другой нотик, а там уже wifi свой собственный живёт. Но не подключается, так как я его не указывал при установке системы. Но можно вытащить usb card из другого нотика тогда wifi работает на этом новом.
Вопрос как дописать второй драйвер, чтобы можно было выбирать, какой wifi adapter в данное время использовать? А то получается, что вместе с hdd пришлось и wifi переставить.
З.Ы.
Интересно, что начальная система, куда ставился wheezy была P3 (coppermine) c другими устройствами и памятью, а эта P Centrino, а все работает, кроме драйвера wifi.
Значит ли это, что начальная установка ставит мног избыточных драйверов, лишних, которые теперь пригодились?
И тогда, если их как-то удалить, уменьшится ли ядро и будет ли быстрее работать система? Или может, это не влияет на скорость?
LinuxForum.Fans
установкв 2 го wifi одновременно
Автор: win22
21 сообщений
4013 просмотров
На общую скорость работы не влияет, на скорость загрузки ядра и его модулей в память - влияет. И на занимаемое на диске и в памяти место влияет. Ядро обычно модульное, и по размеру относительно небольшое. Но можно хоть все модули собрать, включив в состав ядра и получить монстрообразное монолитное ядро, а можно собрать только необходимые модули, опять же, как модули или включить в ядро, и получить ядро, оптимизированное для данного устройства. И да, в состав пакета kernel-modules входит большинство модулей-драйверов, кроме тех, что при сборке включены в состав ядра; большая их часть для данной системы не нужна.
На общую скорость влияет конфигурация ядра - планировщики ввода-вывода, модель работы с системными таймерами, заточенность под конкретную архитектуру и многое другое.
По поводу Wi-Fi -- покажите
text
# lspci -k | grep -A2 -i network
# ifconfig -a
# dmesgПоказать
text
lspci -k | grep -A2 -i network
01:0a.0 Network controller: Cisco Aironet Wireless Communications Cisco Aironet Wireless 802.11b
Subsystem: Cisco Aironet Wireless Communications Device 5000
Kernel driver in use: airo
один выключен airo 350
ifconfig -a
eth1 Link encap:Ethernet HWaddr 00:0e:7b:a8:de:06
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth2 Link encap:Ethernet HWaddr 00:02:8a:fe:8f:74
inet6 addr: fe80::202:8aff:fefe:8f74/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:29 errors:29 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:4582 (4.4 KiB)
Interrupt:11 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:212 errors:0 dropped:0 overruns:0 frame:0
TX packets:212 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:16752 (16.3 KiB) TX bytes:16752 (16.3 KiB)
wifi0 Link encap:UNSPEC HWaddr 00-02-8A-FE-8F-74-00-00-00-00-00-00-00-00-00-00
BROADCAST MULTICAST MTU:2312 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:29 errors:29 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:4582 (4.4 KiB)
Interrupt:11 Base address:0xc000
wlan0 Link encap:Ethernet HWaddr e8:4e:06:05:bd:98
inet addr:192.168.199.10 Bcast:192.168.199.255 Mask:255.255.255.0
inet6 addr: fe80::ea4e:6ff:fe05:bd98/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6597 errors:0 dropped:0 overruns:0 frame:0
TX packets:3882 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6021034 (5.7 MiB) TX bytes:480708 (469.4 KiB)
airo350 & rtl8891 включены оба
ifconfig -a
eth1 Link encap:Ethernet HWaddr 00:0e:7b:a8:de:06
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth2 Link encap:Ethernet HWaddr 00:02:8a:fe:8f:74
inet6 addr: fe80::202:8aff:fefe:8f74/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:280 dropped:0 overruns:0 frame:280
TX packets:29 errors:29 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:4582 (4.4 KiB)
Interrupt:11 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:212 errors:0 dropped:0 overruns:0 frame:0
TX packets:212 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:16752 (16.3 KiB) TX bytes:16752 (16.3 KiB)
wifi0 Link encap:UNSPEC HWaddr 00-02-8A-FE-8F-74-00-00-00-00-00-00-00-00-00-00
BROADCAST MULTICAST MTU:2312 Metric:1
RX packets:0 errors:280 dropped:0 overruns:0 frame:280
TX packets:29 errors:29 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:4582 (4.4 KiB)
Interrupt:11 Base address:0xc000
wlan0 Link encap:Ethernet HWaddr e8:4e:06:05:bd:98
inet addr:192.168.199.10 Bcast:192.168.199.255 Mask:255.255.255.0
inet6 addr: fe80::ea4e:6ff:fe05:bd98/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7093 errors:0 dropped:0 overruns:0 frame:0
TX packets:4402 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6316983 (6.0 MiB) TX bytes:625959 (611.2 KiB)
excluding 0x60000000-0x60ffffff
[ 16.229362] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 16.809641] Console: switching to colour frame buffer device 128x48
[ 16.835545] fb0: inteldrmfb frame buffer device
[ 16.835550] drm: registered panic notifier
[ 16.843678] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 16.892055] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[ 16.892067] pcmcia_socket pcmcia_socket0: cs: memory probe 0xcfc40000-0xcff5ffff: clean.
[ 16.914737] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 3)
[ 17.376902] scsi2 : pata_pcmcia
[ 17.377285] ata3: PATA max PIO0 cmd 0xc100 ctl 0xc10e irq 3
[ 17.540479] ata3.00: CFA: CF CARD, Ver7.02K, max PIO6
[ 17.540492] ata3.00: 15613920 sectors, multi 1: LBA48
[ 17.548475] ata3.00: configured for PIO0
[ 17.548636] isa bounce pool size: 16 pages
[ 17.548826] scsi 2:0:0:0: Direct-Access ATA CF CARD Ver7 PQ: 0 ANSI: 5
[ 17.549852] sd 2:0:0:0: [sdb] 15613920 512-byte logical blocks: (7.99 GB/7.44 GiB)
[ 17.550052] sd 2:0:0:0: [sdb] Write Protect is off
[ 17.550064] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 17.550152] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.551263] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 17.560011] sdb: sdb1 sdb2 < sdb5 >
[ 17.561395] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 18.042254] cfg80211: Calling CRDA to update world regulatory domain
[ 18.506862] rtl8192cu: MAC address: e8:4e:06:05:bd:98
[ 18.506880] rtl8192cu: Board Type 0
[ 19.655026] usb 1-1: firmware: agent loaded rtlwifi/rtl8192cufw.bin into memory
[ 19.655990] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 19.713327] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 19.715921] usbcore: registered new interface driver rtl8192cu
[ 20.846147] cfg80211: World regulatory domain updated:
[ 20.846160] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.846173] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.846186] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.846197] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.846209] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.846221] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.846250] cfg80211: Calling CRDA for country: US
[ 20.878862] cfg80211: Regulatory domain changed to country: US
[ 20.878873] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.878886] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 20.878899] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 20.878910] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.878922] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.878934] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.878946] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 24.437961] Adding 340988k swap on /dev/sda5. Priority:-1 extents:1 across:340988k
[ 24.466530] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 24.974693] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 25.242855] loop: module loaded
[ 29.588763] RPC: Registered named UNIX socket transport module.
[ 29.588770] RPC: Registered udp transport module.
[ 29.588773] RPC: Registered tcp transport module.
[ 29.588777] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 29.673704] FS-Cache: Loaded
[ 29.798388] FS-Cache: Netfs 'nfs' registered for caching
[ 29.846720] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 32.271578] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[ 38.547725] Bluetooth: Core ver 2.16
[ 38.547785] NET: Registered protocol family 31
[ 38.547793] Bluetooth: HCI device and connection manager initialized
[ 38.547804] Bluetooth: HCI socket layer initialized
[ 38.547812] Bluetooth: L2CAP socket layer initialized
[ 38.548922] Bluetooth: SCO socket layer initialized
[ 38.748716] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 38.748728] Bluetooth: BNEP filters: protocol multicast
[ 38.859427] lp0: using parport0 (interrupt-driven).
[ 38.892242] ppdev: user-space parallel port driver
[ 44.835323] rtl8192cu: MAC auto ON okay!
[ 44.870088] rtl8192cu: Tx queue select: 0x05
[ 44.870864] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin
[ 45.297728] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 45.346277] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 47.319800] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 47.322442] wlan0: authenticated
[ 47.322981] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 47.329349] wlan0: RX AssocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 47.329362] wlan0: associated
[ 47.342988] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 58.168039] wlan0: no IPv6 routers present
[ 247.272287] cfg80211: Calling CRDA to update world regulatory domain
[ 247.288382] cfg80211: World regulatory domain updated:
[ 247.288390] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 247.288396] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 247.288402] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 247.288408] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 247.288414] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 247.288420] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 248.124804] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 248.127536] wlan0: authenticated
[ 248.128259] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 248.132299] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 248.132312] wlan0: associated
[ 587.277787] cfg80211: Calling CRDA to update world regulatory domain
[ 587.289213] cfg80211: World regulatory domain updated:
[ 587.289220] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 587.289227] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 587.289233] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 587.289239] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 587.289245] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 587.289251] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 588.160532] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 588.163661] wlan0: authenticated
[ 588.164806] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 588.168800] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 588.168829] wlan0: associated
[ 3827.272259] cfg80211: Calling CRDA to update world regulatory domain
[ 3827.288212] cfg80211: World regulatory domain updated:
[ 3827.288220] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3827.288226] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3827.288233] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3827.288238] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3827.288244] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3827.288250] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3828.115241] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 3828.119503] wlan0: authenticated
[ 3828.120568] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 3828.124612] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 3828.124625] wlan0: associated
[ 4187.270556] cfg80211: Calling CRDA to update world regulatory domain
[ 4187.282067] cfg80211: World regulatory domain updated:
[ 4187.282075] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4187.282082] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4187.282088] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4187.282094] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4187.282100] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4187.282105] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4188.121867] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 4188.123473] wlan0: authenticated
[ 4188.123987] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 4188.135162] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 4188.135200] wlan0: associated
[ 4194.152352] wlan0: disassociated from f8:c0:91:16:fd:9b (Reason: 15)
[ 4194.166072] wlan0: deauthenticating from f8:c0:91:16:fd:9b by local choice (reason=3)
[ 4194.167684] cfg80211: Calling CRDA to update world regulatory domain
[ 4194.185440] cfg80211: World regulatory domain updated:
[ 4194.185452] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4194.185465] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4194.185477] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4194.185489] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4194.185501] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4194.185513] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4195.014737] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 4195.022118] wlan0: authenticated
[ 4195.022613] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 4195.028218] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 4195.028232] wlan0: associated
[ 4201.270298] wlan0: disassociated from f8:c0:91:16:fd:9b (Reason: 15)
[ 4201.283276] wlan0: deauthenticating from f8:c0:91:16:fd:9b by local choice (reason=3)
[ 4201.284939] cfg80211: Calling CRDA to update world regulatory domain
[ 4201.298499] cfg80211: World regulatory domain updated:
[ 4201.298507] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4201.298513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4201.298519] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4201.298525] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4201.298531] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4201.298537] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4202.134252] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 4202.135909] wlan0: authenticated
[ 4202.137034] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 4202.141035] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 4202.141048] wlan0: associated
[ 4208.159645] wlan0: disassociated from f8:c0:91:16:fd:9b (Reason: 15)
[ 4208.173399] wlan0: deauthenticating from f8:c0:91:16:fd:9b by local choice (reason=3)
[ 4208.173933] cfg80211: Calling CRDA to update world regulatory domain
[ 4208.192746] cfg80211: World regulatory domain updated:
[ 4208.192754] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4208.192760] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4208.192766] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4208.192772] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4208.192778] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4208.192784] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4209.028758] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 4209.030476] wlan0: authenticated
[ 4209.030984] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 4209.034979] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 4209.034987] wlan0: associated
[ 4547.268545] cfg80211: Calling CRDA to update world regulatory domain
[ 4547.281068] cfg80211: World regulatory domain updated:
[ 4547.281076] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4547.281083] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4547.281089] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4547.281095] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4547.281101] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4547.281107] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4548.117618] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 4548.119109] wlan0: authenticated
[ 4548.119611] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 4548.123611] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 4548.123619] wlan0: associated
[ 4553.448099] hub 2-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
[ 4553.448118] usb 2-2: USB disconnect, device number 2
[ 4553.704066] usb 2-2: new low-speed USB device number 3 using uhci_hcd
[ 4553.896626] usb 2-2: New USB device found, idVendor=062a, idProduct=0102
[ 4553.896639] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4553.896650] usb 2-2: Product: Wireless Keyboard & Mouse
[ 4553.896659] usb 2-2: Manufacturer: MOSART Semi.
[ 4553.916290] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input11
[ 4553.917000] generic-usb 0003:062A:0102.0003: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:1d.0-2/input0
[ 4553.951319] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input12
[ 4553.953577] generic-usb 0003:062A:0102.0004: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:1d.0-2/input1
[ 4554.151223] wlan0: disassociated from f8:c0:91:16:fd:9b (Reason: 15)
[ 4554.181373] cfg80211: Calling CRDA to update world regulatory domain
[ 4554.181669] wlan0: deauthenticating from f8:c0:91:16:fd:9b by local choice (reason=3)
[ 4554.205757] cfg80211: World regulatory domain updated:
[ 4554.205766] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4554.205773] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4554.205779] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4554.205785] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4554.205791] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4554.205797] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4555.147395] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 4555.150584] wlan0: authenticated
[ 4555.151260] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 4555.155423] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 4555.155431] wlan0: associated
[ 5027.272269] cfg80211: Calling CRDA to update world regulatory domain
[ 5027.287989] cfg80211: World regulatory domain updated:
[ 5027.287998] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5027.288068] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5027.288074] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5027.288080] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5027.288086] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5027.288092] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5028.113010] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 5028.312075] wlan0: authenticate with f8:c0:91:16:fd:9b (try 2)
[ 5028.318065] wlan0: authenticated
[ 5028.318906] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 5028.325379] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 5028.325393] wlan0: associated
[ 5147.272262] cfg80211: Calling CRDA to update world regulatory domain
[ 5147.287972] cfg80211: World regulatory domain updated:
[ 5147.287980] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5147.287987] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5147.287993] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5147.287999] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5147.288068] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5147.288074] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5153.854900] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 5153.863853] wlan0: authenticated
[ 5153.864888] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 5153.871740] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 5153.871754] wlan0: associated
[ 5267.272293] cfg80211: Calling CRDA to update world regulatory domain
[ 5267.287969] cfg80211: World regulatory domain updated:
[ 5267.287978] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5267.287985] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5267.287991] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5267.287997] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5267.288003] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5267.288068] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5273.848722] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 5273.851673] wlan0: authenticated
[ 5273.852343] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 5273.860239] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 5273.860277] wlan0: associated
[ 5387.266106] cfg80211: Calling CRDA to update world regulatory domain
[ 5387.282635] cfg80211: World regulatory domain updated:
[ 5387.282643] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5387.282650] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5387.282656] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5387.282662] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5387.282668] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5387.282674] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5388.121950] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 5388.123466] wlan0: authenticated
[ 5388.123969] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 5388.131125] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 5388.131132] wlan0: associated
[ 5627.272289] cfg80211: Calling CRDA to update world regulatory domain
[ 5627.288000] cfg80211: World regulatory domain updated:
[ 5627.288084] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5627.288091] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5627.288097] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5627.288103] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5627.288109] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5627.288115] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5628.115724] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 5628.117281] wlan0: authenticated
[ 5628.117789] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 5628.121637] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 5628.121645] wlan0: associated
[ 6347.272262] cfg80211: Calling CRDA to update world regulatory domain
[ 6347.287980] cfg80211: World regulatory domain updated:
[ 6347.287988] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6347.287995] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6347.288001] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6347.288070] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6347.288076] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6347.288082] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6348.113577] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 6348.115162] wlan0: authenticated
[ 6348.115669] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 6348.119540] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 6348.119547] wlan0: associated
[ 6587.272269] cfg80211: Calling CRDA to update world regulatory domain
[ 6587.288176] cfg80211: World regulatory domain updated:
[ 6587.288183] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6587.288190] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6587.288196] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6587.288202] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6587.288208] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6587.288214] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6599.603731] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 6599.605308] wlan0: authenticated
[ 6599.605849] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 6599.609912] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 6599.609919] wlan0: associated
[ 7307.266145] cfg80211: Calling CRDA to update world regulatory domain
[ 7307.278647] cfg80211: World regulatory domain updated:
[ 7307.278655] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7307.278661] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7307.278668] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7307.278673] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7307.278679] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7307.278685] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7308.114460] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 7308.116215] wlan0: authenticated
[ 7308.116741] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 7308.120741] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 7308.120752] wlan0: associated
[ 8147.272262] cfg80211: Calling CRDA to update world regulatory domain
[ 8147.287942] cfg80211: World regulatory domain updated:
[ 8147.287950] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8147.287956] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8147.287963] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8147.287969] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8147.287974] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8147.287980] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8148.130342] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 8148.132735] wlan0: authenticated
[ 8148.133342] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 8148.137212] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 8148.137220] wlan0: associated
[ 8747.268284] cfg80211: Calling CRDA to update world regulatory domain
[ 8747.284329] cfg80211: World regulatory domain updated:
[ 8747.284337] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8747.284344] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8747.284350] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8747.284356] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8747.284362] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8747.284367] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8748.115352] wlan0: authenticate with f8:c0:91:16:fd:9b (try 1)
[ 8748.117430] wlan0: authenticated
[ 8748.118112] wlan0: associate with f8:c0:91:16:fd:9b (try 1)
[ 8748.124076] wlan0: RX ReassocResp from f8:c0:91:16:fd:9b (capab=0x411 status=0 aid=2)
[ 8748.124089] wlan0: associated
[console=root]dhcpcd wlan0[/console]
[console]ping ya.ru[/console]
[console]cat /etc/network/interfaces[/console]
а в каком состоянии делать - когда один адаптер выключен или когда оба включены? Так то я на одном сейчас работаю.
а в каком состоянии делать - когда один адаптер выключен или когда оба включены? Так то я на одном сейчас работаю.
Когда USB Wi-Fi отключен.
text
/antonio# dhcpcd wlan0
bash: dhcpcd: command not found
bash: dhcpcd: command not found
[console=root]apt-cache search dhcp[/console]
сейчас поставлю, извиняюсь, что сам не догадался
Показать
text
dhcp-helper - A DHCP relay agent
dhcp-probe - network DHCP or BootP server discover
dhcpcd - DHCP client for automatically configuring IPv4 networking
dhcpcd-dbus - DBus bindings for dhcpcd
dhcpcd-gtk - GTK+ frontend for dhcpcd and wpa_supplicant
dhcpcd5 - RFC2131 compliant DHCP client with IPv4LL support
dhcpdump - Parse DHCP packets from tcpdump
dhcping -win22, [console=root]apt-get install dhcpcd[/console]
Показать
text
dhcpcd wlan0
root@debian:/home/antonio# dhcpcd.sh: interface wlan0 has been configured with new IP=192.168.199.10
dhcpcd wifi0
err, wifi0: interface is not Ethernet, FireWire, InfiniBand or Token Ring
root@debian:/home/antonio# dhcpcd eth2
err, eth2: timed out
err, eth2: lease information file `/var/lib/dhcpcd/dhcpcd-eth2.info' does not exist
warn, eth2: using IPV4LL address 169.254.218.189
root@debian:/home/antonio# dhcpcd.sh: interface eth2 has been configured with new IP=169.254.218.189
у меня когда включен встроенный pci adapter 350 он работает. но сеть найти не может
то есть он их видит, а они серенькие и он соединяться не хочет.
просто не нашел как сюда скрин прицепить, но там сверху список точек, которые нашел встроенный адаптер, они серые, а внизу список которые нашел USB adapter они черные и можно с ними делать соединения.
вот как вывод команды выглядит, когда оба адаптера включены.
text
iwconfig
wifi0 IEEE 802.11-DS ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Invalid
Bit Rate:11 Mb/s Tx-Power=20 dBm Sensitivity=0/65535
Retry limit:16 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=0/100 Signal level=-103 dBm Noise level=0 dBm
Rx invalid nwid:8165 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:55852 Missed beacon:0
lo no wireless extensions.
eth2 IEEE 802.11-DS ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Invalid
Bit Rate:11 Mb/s Tx-Power=20 dBm Sensitivity=0/65535
Retry limit:16 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=0/100 Signal level=-103 dBm Noise level=0 dBm
Rx invalid nwid:8165 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:55852 Missed beacon:0
eth1 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"onlime_151"
Mode:Managed Frequency:2.462 GHz Access Point: F8:C0:91:16:FD:9B
Bit Rate=150 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=48/70 Signal level=-62 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:4 Missed beacon:0
я его (wifi0 eth2) прописывал в /etc/network/interfaces заместо wlan0 но тогда вообще ничего не работает
Показать
text
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
#NetworkManager#
iface eth0 inet dhcp
я взамен eth0 встроенный адаптер (wifi0 eth2) ставил, но не работает.
Вообщеничего не соединяется.
можно собрать только необходимые модули, опять же, как модули или включить в ядро, и получить ядро, оптимизированное для данного устройства. И да, в состав пакета kernel-modules входит большинство модулей-драйверов, кроме тех, что при сборке включены в состав ядра; большая их часть для данной системы не нужна.
На общую скорость влияет конфигурация ядра - планировщики ввода-вывода, модель работы с системными таймерами, заточенность под конкретную архитектуру и многое другое.
порекомендуйте пожалуйста, с чего начать читать, я хочу попробовать ядро под Р3 собрать, из спортивного интереса.
Потому, что мне хочется узнать, почему он так медленно работает на Дебиане, еще медленне на Убунте. (Например GIMP просто по 2-3 минуты делает каждую опеацию, а когда добавишь несколько слоев, так вообще вылетает.) а быстрее всего на Вндоус ХР. Из того, что я читал, я сделал вывод, что unix системы на одинаковом железе работают быстрее виндоус, а тут противоречие получается
win22, про сборку ядра: раз, официальная документация - два.
Про "работает быстрее" - это так, если сравнивать Linux тех же примерно лет, что и ХР. Debian 7 - современная система.
а что с wifi можно сделать? когда вытаскиваю usb wifi, то внутренний видит сети только подключиться к ним нельзя.
win22
Почитал тему, но не понял Вашей цели. А зачем Вам одновременно две железки wifi?
Быстрее - точно не будет :) Настройте одну и пользуйтесь.
:)
mне нужно чтобы работал встроенный.
Вопрос как дописать второй драйвер, чтобы можно было выбирать, какой wifi adapter в данное время использовать? А то получается, что вместе с hdd пришлось и wifi переставить.
Ну, уберите USB-адаптер и настраивайте встроеный. hdd - вообще нипричём, там у Вас просто были настройки, сделайте их на новом, как и раньше делали.
win22, а что вы используете для подключения? Есть варианты - через правку interfaces или через NetworkManager.
win22, а что вы используете для подключения? Есть варианты - через правку interfaces или через NetworkManager.
NetworkManager - как-то стрёмно. А просто написать?
PS Я тут увлёкся убунтой, делается как-то элементарно. А в Debian - не так?
Войдите или зарегистрируйтесь, чтобы ответить.
