Есть intel G1620 со встроенной графикой - HD200. На Debian 7 максимальное разрешение экрана 1024x768. Активное "гугление" в принципе ни к чему не привело.
Подскажите пожалуйста, как можно повысить разрешение ?
Проблемы с разрешением (HD200)
Разрешение экрана где — в консоли или «иксах»? В последнем случае покажите конфигурационный файл «иксов» (если есть) и лог загрузки «иксов» /var/log/Xorg.0.log.
В Debian 7 версия драйвера xserver-xorg-video-intel 2.19.0, поддержка HD2000 началась с версии 2.20.12, а сейчас уже актуальна версия 2.21.9 Так что обновляйте дрова, или юзайте дистрибутив который более "bleeding edge" чем стабильный Дебиан(в Sid, кстати тоже 2.19).
В "иксах. "Xorg.conf нет
Показать
[ 13.827]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 13.827] X Protocol Version 11, Revision 0
[ 13.827] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[ 13.827] Current Operating System: Linux debian-home 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64
[ 13.827] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=78452a63-aa46-445a-918d-47d96a05e2fa ro quiet
[ 13.827] Build Date: 17 April 2013 10:22:47AM
[ 13.827] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>)
[ 13.827] Current version of pixman: 0.26.0
[ 13.827] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.827] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.827] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 20 02:43:15 2013
[ 13.892] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.915] (==) No Layout section. Using the first Screen section.
[ 13.915] (**) |-->Screen "Screen0" (0)
[ 13.915] (**) | |-->Monitor "Monitor0"
[ 13.915] (**) Option "BlankTime" "0"
[ 13.915] (**) Option "StandbyTime" "0"
[ 13.915] (**) Option "SuspendTime" "0"
[ 13.915] (**) Option "OffTime" "0"
[ 13.915] (==) Automatically adding devices
[ 13.915] (==) Automatically enabling devices
[ 13.978] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 13.978] Entry deleted from font path.
[ 14.073] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 14.073] Entry deleted from font path.
[ 14.073] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 14.073] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 14.073] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14.073] (II) Loader magic: 0x7f60228c2ae0
[ 14.073] (II) Module ABI versions:
[ 14.073] X.Org ANSI C Emulation: 0.4
[ 14.073] X.Org Video Driver: 12.1
[ 14.073] X.Org XInput driver : 16.0
[ 14.073] X.Org Server Extension : 6.0
[ 14.074] (--) PCI:*(0:0:2:0) 8086:0152:1458:d000 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 14.074] (II) Open ACPI successful (/var/run/acpid.socket)
[ 14.074] (II) LoadModule: "extmod"
[ 14.091] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 14.097] (II) Module extmod: vendor="X.Org Foundation"
[ 14.097] compiled for 1.12.4, module version = 1.0.0
[ 14.097] Module class: X.Org Server Extension
[ 14.097] ABI class: X.Org Server Extension, version 6.0
[ 14.097] (II) Loading extension SELinux
[ 14.097] (II) Loading extension MIT-SCREEN-SAVER
[ 14.097] (II) Loading extension XFree86-VidModeExtension
[ 14.097] (II) Loading extension XFree86-DGA
[ 14.097] (II) Loading extension DPMS
[ 14.097] (II) Loading extension XVideo
[ 14.097] (II) Loading extension XVideo-MotionCompensation
[ 14.097] (II) Loading extension X-Resource
[ 14.097] (II) LoadModule: "dbe"
[ 14.097] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 14.097] (II) Module dbe: vendor="X.Org Foundation"
[ 14.097] compiled for 1.12.4, module version = 1.0.0
[ 14.097] Module class: X.Org Server Extension
[ 14.097] ABI class: X.Org Server Extension, version 6.0
[ 14.097] (II) Loading extension DOUBLE-BUFFER
[ 14.097] (II) LoadModule: "glx"
[ 14.097] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.099] (II) Module glx: vendor="X.Org Foundation"
[ 14.099] compiled for 1.12.4, module version = 1.0.0
[ 14.099] ABI class: X.Org Server Extension, version 6.0
[ 14.099] (==) AIGLX enabled
[ 14.099] (II) Loading extension GLX
[ 14.100] (II) LoadModule: "record"
[ 14.100] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 14.100] (II) Module record: vendor="X.Org Foundation"
[ 14.100] compiled for 1.12.4, module version = 1.13.0
[ 14.100] Module class: X.Org Server Extension
[ 14.100] ABI class: X.Org Server Extension, version 6.0
[ 14.100] (II) Loading extension RECORD
[ 14.100] (II) LoadModule: "dri"
[ 14.100] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 14.106] (II) Module dri: vendor="X.Org Foundation"
[ 14.106] compiled for 1.12.4, module version = 1.0.0
[ 14.106] ABI class: X.Org Server Extension, version 6.0
[ 14.106] (II) Loading extension XFree86-DRI
[ 14.106] (II) LoadModule: "dri2"
[ 14.106] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 14.107] (II) Module dri2: vendor="X.Org Foundation"
[ 14.107] compiled for 1.12.4, module version = 1.2.0
[ 14.107] ABI class: X.Org Server Extension, version 6.0
[ 14.107] (II) Loading extension DRI2
[ 14.107] (==) Matched intel as autoconfigured driver 0
[ 14.107] (==) Matched vesa as autoconfigured driver 1
[ 14.107] (==) Matched fbdev as autoconfigured driver 2
[ 14.107] (==) Assigned the driver to the xf86ConfigLayout
[ 14.107] (II) LoadModule: "intel"
[ 14.115] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 14.157] (II) Module intel: vendor="X.Org Foundation"
[ 14.157] compiled for 1.12.3.902, module version = 2.19.0
[ 14.157] Module class: X.Org Video Driver
[ 14.157] ABI class: X.Org Video Driver, version 12.1
[ 14.157] (II) LoadModule: "vesa"
[ 14.157] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 14.182] (II) Module vesa: vendor="X.Org Foundation"
[ 14.182] compiled for 1.12.1, module version = 2.3.1
[ 14.182] Module class: X.Org Video Driver
[ 14.182] ABI class: X.Org Video Driver, version 12.0
[ 14.182] (II) LoadModule: "fbdev"
[ 14.183] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 14.183] (II) Module fbdev: vendor="X.Org Foundation"
[ 14.183] compiled for 1.12.1, module version = 0.4.2
[ 14.183] ABI class: X.Org Video Driver, version 12.0
[ 14.183] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[ 14.184] (II) VESA: driver for VESA chipsets: vesa
[ 14.184] (II) FBDEV: driver for framebuffer: fbdev
[ 14.184] (++) using VT number 7
[ 14.187] (WW) Falling back to old probe method for vesa
[ 14.187] (WW) Falling back to old probe method for fbdev
[ 14.187] (II) Loading sub module "fbdevhw"
[ 14.187] (II) LoadModule: "fbdevhw"
[ 14.188] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 14.194] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 14.194] compiled for 1.12.4, module version = 0.0.2
[ 14.194] ABI class: X.Org Video Driver, version 12.1
[ 14.194] drmOpenDevice: node name is /dev/dri/card0
[ 14.194] drmOpenDevice: open result is 9, (OK)
[ 14.194] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 14.194] drmOpenDevice: node name is /dev/dri/card0
[ 14.194] drmOpenDevice: open result is 9, (OK)
[ 14.194] drmOpenByBusid: drmOpenMinor returns 9
[ 14.194] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 14.194] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 14.194] (==) intel(0): RGB weight 888
[ 14.194] (==) intel(0): Default visual is TrueColor
[ 14.194] (II) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT1)
[ 14.194] (--) intel(0): Chipset: "Ivybridge Desktop (GT1)"
[ 14.194] (**) intel(0): Relaxed fencing enabled
[ 14.194] (**) intel(0): Wait on SwapBuffers? enabled
[ 14.194] (**) intel(0): Triple buffering? enabled
[ 14.194] (**) intel(0): Framebuffer tiled
[ 14.194] (**) intel(0): Pixmaps tiled
[ 14.194] (**) intel(0): 3D buffers tiled
[ 14.194] (**) intel(0): SwapBuffers wait enabled
[ 14.194] (==) intel(0): video overlay key set to 0x101fe
[ 14.195] (II) intel(0): Output VGA1 using monitor section Monitor0
[ 14.196] (II) intel(0): Output HDMI1 has no monitor section
[ 14.244] (II) intel(0): Output DP1 has no monitor section
[ 14.244] (II) intel(0): Output HDMI2 has no monitor section
[ 14.245] (II) intel(0): Output HDMI3 has no monitor section
[ 14.292] (II) intel(0): Output DP2 has no monitor section
[ 14.340] (II) intel(0): Output DP3 has no monitor section
[ 14.340] (II) intel(0): EDID for output VGA1
[ 14.340] (II) intel(0): Printing probed modes for output VGA1
[ 14.340] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz UeP)
[ 14.340] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.340] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 14.340] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 14.340] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 14.341] (II) intel(0): EDID for output HDMI1
[ 14.388] (II) intel(0): EDID for output DP1
[ 14.388] (II) intel(0): EDID for output HDMI2
[ 14.389] (II) intel(0): EDID for output HDMI3
[ 14.436] (II) intel(0): EDID for output DP2
[ 14.484] (II) intel(0): EDID for output DP3
[ 14.484] (II) intel(0): Output VGA1 connected
[ 14.484] (II) intel(0): Output HDMI1 disconnected
[ 14.484] (II) intel(0): Output DP1 disconnected
[ 14.484] (II) intel(0): Output HDMI2 disconnected
[ 14.484] (II) intel(0): Output HDMI3 disconnected
[ 14.484] (II) intel(0): Output DP2 disconnected
[ 14.484] (II) intel(0): Output DP3 disconnected
[ 14.484] (II) intel(0): Using user preference for initial modes
[ 14.484] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 14.484] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 14.484] (II) intel(0): Kernel page flipping support detected, enabling
[ 14.484] (==) intel(0): DPI set to (96, 96)
[ 14.484] (II) Loading sub module "fb"
[ 14.484] (II) LoadModule: "fb"
[ 14.484] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.544] (II) Module fb: vendor="X.Org Foundation"
[ 14.544] compiled for 1.12.4, module version = 1.0.0
[ 14.544] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.544] (II) Loading sub module "dri2"
[ 14.544] (II) LoadModule: "dri2"
[ 14.544] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 14.544] (II) Module dri2: vendor="X.Org Foundation"
[ 14.544] compiled for 1.12.4, module version = 1.2.0
[ 14.544] ABI class: X.Org Server Extension, version 6.0
[ 14.544] (II) UnloadModule: "vesa"
[ 14.544] (II) Unloading vesa
[ 14.544] (II) UnloadModule: "fbdev"
[ 14.544] (II) Unloading fbdev
[ 14.544] (II) UnloadSubModule: "fbdevhw"
[ 14.544] (II) Unloading fbdevhw
[ 14.544] (==) Depth 24 pixmap format is 32 bpp
[ 14.544] (II) intel(0): [DRI2] Setup complete
[ 14.544] (II) intel(0): [DRI2] DRI driver: i965
[ 14.544] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 14.583] (II) UXA(0): Driver registered support for the following operations:
[ 14.583] (II) solid
[ 14.583] (II) copy
[ 14.583] (II) composite (RENDER acceleration)
[ 14.583] (II) put_image
[ 14.583] (II) get_image
[ 14.583] (==) intel(0): Backing store disabled
[ 14.583] (==) intel(0): Silken mouse enabled
[ 14.583] (II) intel(0): Initializing HW Cursor
[ 14.583] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 14.583] (==) intel(0): Intel XvMC decoder enabled
[ 14.583] (II) intel(0): Set up textured video
[ 14.583] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 14.583] (II) intel(0): direct rendering: DRI2 Enabled
[ 14.583] (==) intel(0): hotplug detection: "enabled"
[ 14.668] (--) RandR disabled
[ 14.668] (II) Initializing built-in extension Generic Event Extension
[ 14.668] (II) Initializing built-in extension SHAPE
[ 14.668] (II) Initializing built-in extension MIT-SHM
[ 14.668] (II) Initializing built-in extension XInputExtension
[ 14.668] (II) Initializing built-in extension XTEST
[ 14.668] (II) Initializing built-in extension BIG-REQUESTS
[ 14.668] (II) Initializing built-in extension SYNC
[ 14.668] (II) Initializing built-in extension XKEYBOARD
[ 14.668] (II) Initializing built-in extension XC-MISC
[ 14.668] (II) Initializing built-in extension SECURITY
[ 14.668] (II) Initializing built-in extension XINERAMA
[ 14.668] (II) Initializing built-in extension XFIXES
[ 14.668] (II) Initializing built-in extension RENDER
[ 14.668] (II) Initializing built-in extension RANDR
[ 14.668] (II) Initializing built-in extension COMPOSITE
[ 14.668] (II) Initializing built-in extension DAMAGE
[ 14.668] (II) SELinux: Disabled on system
[ 15.229] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 15.229] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 15.229] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 15.229] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 15.229] (II) AIGLX: Loaded and initialized i965
[ 15.229] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 15.230] (II) intel(0): Setting screen physical size to 270 x 203
[ 15.861] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 15.861] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.861] (II) LoadModule: "evdev"
[ 15.861] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.898] (II) Module evdev: vendor="X.Org Foundation"
[ 15.898] compiled for 1.12.1, module version = 2.7.0
[ 15.898] Module class: X.Org XInput Driver
[ 15.898] ABI class: X.Org XInput driver, version 16.0
[ 15.898] (II) Using input driver 'evdev' for 'Power Button'
[ 15.898] (**) Power Button: always reports core events
[ 15.898] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 15.898] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.898] (--) evdev: Power Button: Found keys
[ 15.898] (II) evdev: Power Button: Configuring as keyboard
[ 15.898] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 15.898] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 15.898] (**) Option "xkb_rules" "evdev"
[ 15.898] (**) Option "xkb_model" "pc105"
[ 15.898] (**) Option "xkb_layout" "us"
[ 15.898] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 15.898] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 15.898] (II) Using input driver 'evdev' for 'Video Bus'
[ 15.898] (**) Video Bus: always reports core events
[ 15.898] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 15.898] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 15.898] (--) evdev: Video Bus: Found keys
[ 15.898] (II) evdev: Video Bus: Configuring as keyboard
[ 15.898] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 15.898] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 15.898] (**) Option "xkb_rules" "evdev"
[ 15.898] (**) Option "xkb_model" "pc105"
[ 15.898] (**) Option "xkb_layout" "us"
[ 15.899] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 15.899] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.899] (II) Using input driver 'evdev' for 'Power Button'
[ 15.899] (**) Power Button: always reports core events
[ 15.899] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 15.899] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.899] (--) evdev: Power Button: Found keys
[ 15.899] (II) evdev: Power Button: Configuring as keyboard
[ 15.899] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 15.899] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 15.899] (**) Option "xkb_rules" "evdev"
[ 15.899] (**) Option "xkb_model" "pc105"
[ 15.899] (**) Option "xkb_layout" "us"
[ 15.900] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event5)
[ 15.900] (II) No input driver specified, ignoring this device.
[ 15.900] (II) This device may have been added with another device file.
[ 15.900] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event6)
[ 15.900] (II) No input driver specified, ignoring this device.
[ 15.900] (II) This device may have been added with another device file.
[ 15.900] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 15.900] (II) No input driver specified, ignoring this device.
[ 15.900] (II) This device may have been added with another device file.
[ 15.900] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 15.900] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 15.900] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 15.900] (**) AT Translated Set 2 keyboard: always reports core events
[ 15.900] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 15.900] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 15.900] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 15.900] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 15.900] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 15.900] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 15.901] (**) Option "xkb_rules" "evdev"
[ 15.901] (**) Option "xkb_model" "pc105"
[ 15.901] (**) Option "xkb_layout" "us"
[ 15.901] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 15.901] (II) No input driver specified, ignoring this device.
[ 15.901] (II) This device may have been added with another device file.
to sun: не подскажете как обновить ?
to sun: не подскажете как обновить ?
Могу только посоветовать на свой страх и риск поставить драйвер из ветки experimental, там версия 2.20.14
Да, пробуйте из экспериментальной ветки. Поставьте и заблокируйте, чтобы ненароком не откатился на стабильную версию. А если не получится, то соберите из исходников эту версию.
Да, пробуйте из экспериментальной ветки. Поставьте и заблокируйте, чтобы ненароком не откатился на стабильную версию. А если не получится, то соберите из исходников эту версию.
А как заблокировать подскажите пожалуйста ?
После установки 2.20.14 ни чего не изменилось к сожалению
покажите выхлоп команды
$ xrandrScreen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.0*+
800x600 60.3 56.2
848x480 60.0
640x480 59.9
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
Попробуйте это
$ xrandr --output VGA1 --mode 1024x768вместо 1024х768 поставьте родное разрешение вашего монитора
почему оно сразу не дает выбрать норм вариант ?
почему оно сразу не дает выбрать норм вариант ?
Не знаю, нужно разбираться, очевидно ваше железо толком не распознаётся. С помощью последней команды удалось сменить разрешение на нужное? Если да, то можно сделать скрипт и добавить его в автозагрузку, чтобы разрешение выстанавливалось автоматом.
Не знаю, нужно разбираться, очевидно ваше железо толком не распознаётся. С помощью последней команды удалось сменить разрешение на нужное? Если да, то можно сделать скрипт и добавить его в автозагрузку, чтобы разрешение восстанавливалось автоматом.
Через
xrrandr --newmode
xrandr --addmodeзаводиться. Но ведь по идее должно работать нормально и само. Может есть смысл попробовать драйвера с сайта производителя ?
Но ведь по идее должно работать нормально и само. Может есть смысл попробовать драйвера с сайта производителя ?
Попробуйте, возможно, пойдут.
А пойдет пакет от Ubuntu или надо собирать? https://01.org/linuxgraphics/downloads