Добрый день!
У меня проблема с настройкой сетевых интерфейсов. В компе 5 сетевушек, 3 сразу увидел, а ещё 2 никак :(
карточки - D-Link DGE 528T.
root@debian:~# uname -a
Linux debian 2.6.32-5-686 #1 SMP Sun May 6 04:01:19 UTC 2012 i686 GNU/Linux
root@debian:~# lspci
00:00.0 Host bridge: Intel Corporation Device 0150 (rev 09)
00:01.0 PCI bridge: Intel Corporation Device 0151 (rev 09)
00:14.0 USB Controller: Intel Corporation Device 1e31 (rev 04)
00:16.0 Communication controller: Intel Corporation Device 1e3a (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04)
00:1a.0 USB Controller: Intel Corporation Device 1e2d (rev 04)
00:1b.0 Audio device: Intel Corporation Device 1e20 (rev 04)
00:1c.0 PCI bridge: Intel Corporation Device 1e10 (rev c4)
00:1c.1 PCI bridge: Intel Corporation Device 1e12 (rev c4)
00:1c.2 PCI bridge: Intel Corporation Device 1e14 (rev c4)
00:1c.4 PCI bridge: Intel Corporation Device 1e18 (rev c4)
00:1c.5 PCI bridge: Intel Corporation Device 1e1a (rev c4)
00:1c.7 PCI bridge: Intel Corporation Device 1e1e (rev c4)
00:1d.0 USB Controller: Intel Corporation Device 1e26 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Device 1e44 (rev 04)
00:1f.2 SATA controller: Intel Corporation Device 1e02 (rev 04)
00:1f.3 SMBus: Intel Corporation Device 1e22 (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation Device 104a (rev a1)
01:00.1 Audio device: nVidia Corporation Device 0e08 (rev a1)
03:00.0 Ethernet controller: D-Link System Inc DGE-528T Gigabit Ethernet Adapter (rev 06)
04:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 30)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
05:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
05:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
06:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
07:00.0 Ethernet controller: D-Link System Inc DGE-528T Gigabit Ethernet Adapter (rev 06)
08:00.0 SATA controller: Marvell Technology Group Ltd. Device 9172 (rev 11)
root@debian:~# lspci |grep Network
00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04)
root@debian:~# dmesg | grep eth
[ 1.579805] r8169 0000:05:00.0: eth0: RTL8169sb/8110sb at 0xf7dec000, 00:e0:53:0c:55:03, XID 10000000 IRQ 16
[ 1.580237] r8169 0000:05:01.0: eth1: RTL8169sb/8110sb at 0xf7df0000, 00:e0:53:0c:54:43, XID 10000000 IRQ 17
[ 1.832347] e1000e 0000:00:19.0: eth2: (PCI Express:2.5GB/s:Width x1) 00:22:4d:7d:29:32
[ 1.832349] e1000e 0000:00:19.0: eth2: Intel(R) PRO/1000 Network Connection
[ 1.832382] e1000e 0000:00:19.0: eth2: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 24.365006] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 25.969899] e1000e: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 25.969901] e1000e 0000:00:19.0: eth2: 10/100 speed: disabling TSO
[ 25.970018] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 36.851806] eth2: no IPv6 routers present
root@debian:~# modprobe -l | grep 8169
kernel/drivers/net/r8169.ko
root@debian:~# modprobe -l | grep e1000
kernel/drivers/net/e1000/e1000.ko
kernel/drivers/net/e1000e/e1000e.ko
root@debian:~# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:e0:53:0c:55:03
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:16 Base address:0xc000
eth1 Link encap:Ethernet HWaddr 00:e0:53:0c:54:43
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:17
eth2 Link encap:Ethernet HWaddr 00:22:4d:7d:29:32
inet addr:192.168.1.51 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::222:4dff:fe7d:2932/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:354442 errors:0 dropped:0 overruns:0 frame:0
TX packets:61442 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:39013416 (37.2 MiB) TX bytes:5269685 (5.0 MiB)
Interrupt:20 Memory:f7600000-f7620000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:291 errors:0 dropped:0 overruns:0 frame:0
TX packets:291 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:20846 (20.3 KiB) TX bytes:20846 (20.3 KiB)
Помогите советом. Как мне сделать так, что бы работали все сетевушки?