При установке не определился вай-фай

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 0944
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
Subsystem: Hewlett-Packard Company NC6220
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 308a
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
Subsystem: Hewlett-Packard Company Device 0944
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
Subsystem: Hewlett-Packard Company Device 0944
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
Subsystem: Hewlett-Packard Company Device 0944
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 0944
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
Subsystem: Hewlett-Packard Company Compaq NC6220
Kernel driver in use: Intel ICH
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 0944
Kernel driver in use: Intel ICH Modem
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
Subsystem: Hewlett-Packard Company Device 0944
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 0944
Kernel driver in use: ata_piix
02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220
02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
Subsystem: Hewlett-Packard Company Device 0944
Kernel driver in use: yenta_cardbus
02:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
Subsystem: Hewlett-Packard Company Device 0944
Kernel driver in use: tifm_7xx1
02:06.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
Subsystem: Hewlett-Packard Company Device 0944
Kernel driver in use: sdhci-pci
02:06.5 Communication controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Smart Card Controller
Subsystem: Hewlett-Packard Company Device 0944
10:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
Subsystem: Hewlett-Packard Company Device 0944
Kernel driver in use: tg3




enable it with 'pcie_aspm=force'
[ 0.136825] pci 0000:00:1c.0: bridge 32bit mmio: [0xd0000000-0xd03fffff]
[ 0.136884] pci 0000:00:1c.1: bridge io port: [0x00-0xfff]
[ 0.136889] pci 0000:00:1c.1: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.136897] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 0.136955] pci 0000:02:04.0: reg 10 32bit mmio: [0xd0400000-0xd0400fff]
[ 0.137027] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
[ 0.137033] pci 0000:02:04.0: PME# disabled
[ 0.137094] pci 0000:02:06.0: reg 10 32bit mmio: [0xd0401000-0xd0401fff]
[ 0.137122] pci 0000:02:06.0: supports D1 D2
[ 0.137125] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.137131] pci 0000:02:06.0: PME# disabled
[ 0.137185] pci 0000:02:06.3: reg 10 32bit mmio: [0xd0402000-0xd0403fff]
[ 0.137255] pci 0000:02:06.3: supports D1 D2
[ 0.137258] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot
[ 0.137264] pci 0000:02:06.3: PME# disabled
[ 0.137313] pci 0000:02:06.4: reg 10 32bit mmio: [0xd0404000-0xd04040ff]
[ 0.137324] pci 0000:02:06.4: reg 14 32bit mmio: [0xd0405000-0xd04050ff]
[ 0.137334] pci 0000:02:06.4: reg 18 32bit mmio: [0xd0406000-0xd04060ff]
[ 0.137390] pci 0000:02:06.4: supports D1 D2
[ 0.137393] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot
[ 0.137399] pci 0000:02:06.4: PME# disabled
[ 0.137448] pci 0000:02:06.5: reg 10 32bit mmio: [0xd0407000-0xd0407fff]
[ 0.137459] pci 0000:02:06.5: reg 14 32bit mmio: [0xd0408000-0xd0408fff]
[ 0.137469] pci 0000:02:06.5: reg 18 32bit mmio: [0xd0409000-0xd0409fff]
[ 0.137480] pci 0000:02:06.5: reg 1c 32bit mmio: [0xd040a000-0xd040afff]
[ 0.137529] pci 0000:02:06.5: supports D1 D2
[ 0.137531] pci 0000:02:06.5: PME# supported from D0 D1 D2 D3hot
[ 0.137537] pci 0000:02:06.5: PME# disabled
[ 0.137603] pci 0000:00:1e.0: transparent bridge
[ 0.137610] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0400000-0xd07fffff]
[ 0.137658] pci_bus 0000:00: on NUMA node 0
[ 0.137662] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
[ 0.137875] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C06D._PRT]
[ 0.138031] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C006._PRT]
[ 0.138117] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C0DE._PRT]
[ 0.165053] ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11)
[ 0.165245] ACPI: PCI Interrupt Link [C0DB] (IRQs 10 *11)
[ 0.165436] ACPI: PCI Interrupt Link [C0DC] (IRQs 10 *11)
[ 0.165624] ACPI: PCI Interrupt Link [C0DD] (IRQs *10 11)
[ 0.165814] ACPI: PCI Interrupt Link [C0F0] (IRQs *10 11)
[ 0.166004] ACPI: PCI Interrupt Link [C0F1] (IRQs 10 *11)
[ 0.166193] ACPI: PCI Interrupt Link [C0F2] (IRQs *10 11)
[ 0.166278] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20090903/pci_link-184)
[ 0.166416] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.166425] vgaarb: loaded
[ 0.166481] PCI: Using ACPI for IRQ routing
[ 0.166486] pci 0000:00:1c.1: BAR 13: can't allocate resource
[ 0.166488] pci 0000:00:1c.1: BAR 14: can't allocate resource
[ 0.166490] pci 0000:00:1c.1: BAR 15: can't allocate resource
[ 0.166768] hpet clockevent registered
[ 0.166772] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.166779] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.166785] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.172015] Switching to clocksource tsc
[ 0.173397] pnp: PnP ACPI init
[ 0.173405] ACPI: bus type pnp registered
[ 0.184887] pnp: PnP ACPI: found 15 devices
[ 0.184889] ACPI: ACPI bus type pnp unregistered
[ 0.184893] PnPBIOS: Disabled by ACPI PNP
[ 0.184902] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.184905] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.184909] system 00:00: iomem range 0x100000-0x3f7fffff could not be reserved
[ 0.184919] system 00:0c: ioport range 0x500-0x55f has been reserved
[ 0.184922] system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.184926] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.184932] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[ 0.184935] system 00:0d: ioport range 0x1000-0x107f has been reserved
[ 0.184939] system 00:0d: ioport range 0x1100-0x113f has been reserved
[ 0.184942] system 00:0d: ioport range 0x1200-0x121f has been reserved
[ 0.184946] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.184949] system 00:0d: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 0.184953] system 00:0d: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.184957] system 00:0d: iomem range 0xfed90000-0xfed9afff has been reserved
[ 0.184962] system 00:0e: iomem range 0xd3000-0xd3fff has been reserved
[ 0.184966] system 00:0e: iomem range 0xfeda0000-0xfedbffff has been reserved
[ 0.184970] system 00:0e: iomem range 0xfec01000-0xfec01fff has been reserved
[ 0.219680] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:10
[ 0.219685] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.219691] pci 0000:00:1c.0: MEM window: 0xd0000000-0xd03fffff
[ 0.219697] pci 0000:00:1c.0: PREFETCH window: 0x00000044000000-0x000000441fffff
[ 0.219706] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:20
[ 0.219710] pci 0000:00:1c.1: IO window: 0x4000-0x4fff
[ 0.219716] pci 0000:00:1c.1: MEM window: 0x44200000-0x443fffff
[ 0.219722] pci 0000:00:1c.1: PREFETCH window: 0x00000044400000-0x000000445fffff
[ 0.219733] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
[ 0.219735] pci 0000:02:06.0: IO window: 0x006000-0x0060ff
[ 0.219742] pci 0000:02:06.0: IO window: 0x006400-0x0064ff
[ 0.219748] pci 0000:02:06.0: PREFETCH window: 0x40000000-0x43ffffff
[ 0.219754] pci 0000:02:06.0: MEM window: 0x48000000-0x4bffffff
[ 0.219761] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.219765] pci 0000:00:1e.0: IO window: 0x6000-0x6fff
[ 0.219771] pci 0000:00:1e.0: MEM window: 0xd0400000-0xd07fffff
[ 0.219777] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x43ffffff
[ 0.219795] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.219801] pci 0000:00:1c.0: setting latency timer to 64
[ 0.219811] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[ 0.219816] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.219822] pci 0000:00:1c.1: setting latency timer to 64
[ 0.219830] pci 0000:00:1e.0: setting latency timer to 64
[ 0.219843] pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.219851] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.219854] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.219857] pci_bus 0000:10: resource 0 io: [0x3000-0x3fff]
[ 0.219860] pci_bus 0000:10: resource 1 mem: [0xd0000000-0xd03fffff]
[ 0.219863] pci_bus 0000:10: resource 2 pref mem [0x44000000-0x441fffff]
[ 0.219866] pci_bus 0000:20: resource 0 io: [0x4000-0x4fff]
[ 0.219869] pci_bus 0000:20: resource 1 mem: [0x44200000-0x443fffff]
[ 0.219872] pci_bus 0000:20: resource 2 pref mem [0x44400000-0x445fffff]
[ 0.219876] pci_bus 0000:02: resource 0 io: [0x6000-0x6fff]
[ 0.219879] pci_bus 0000:02: resource 1 mem: [0xd0400000-0xd07fffff]
[ 0.219882] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff]
[ 0.219885] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.219887] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.219891] pci_bus 0000:03: resource 0 io: [0x6000-0x60ff]
[ 0.219893] pci_bus 0000:03: resource 1 io: [0x6400-0x64ff]
[ 0.219896] pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff]
[ 0.219899] pci_bus 0000:03: resource 3 mem: [0x48000000-0x4bffffff]
[ 0.219927] NET: Registered protocol family 2
[ 0.220016] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.220303] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.221039] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.221504] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.221508] TCP reno registered
[ 0.221621] NET: Registered protocol family 1
[ 0.221646] pci 0000:00:02.0: Boot video device
[ 0.221794] Unpacking initramfs...
[ 0.499102] Freeing initrd memory: 8499k freed
[ 0.506272] audit: initializing netlink socket (disabled)
[ 0.506293] type=2000 audit(1337422746.504:1): initialized
[ 0.511228] highmem bounce pool size: 64 pages
[ 0.511234] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.512775] VFS: Disk quotas dquot_6.5.2
[ 0.512837] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.512929] msgmni has been set to 1739
[ 0.513139] alg: No test for stdrng (krng)
[ 0.513193] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.513196] io scheduler noop registered
[ 0.513198] io scheduler anticipatory registered
[ 0.513201] io scheduler deadline registered
[ 0.513239] io scheduler cfq registered (default)
[ 0.513390] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.513402] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.513566] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.513576] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.513772] isapnp: Scanning for PnP cards...
[ 0.868056] isapnp: No Plug & Play device found
[ 0.869380] Linux agpgart interface v0.103
[ 0.869453] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 0.870389] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 0.873035] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 0.873110] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.873234] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.873389] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 0.873633] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.873844] serial 0000:00:1e.3: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 0.873851] serial 0000:00:1e.3: PCI INT B disabled
[ 0.873940] PNP: PS/2 Controller [PNP0303:C1C5,PNP0f13:C1C6] at 0x60,0x64 irq 1,12
[ 0.875567] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.876342] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.876352] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.876381] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.876406] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.876428] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.876514] mice: PS/2 mouse device common for all mice
[ 0.876579] rtc_cmos 00:09: RTC can wake from S4
[ 0.876620] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 0.876651] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.876663] cpuidle: using governor ladder
[ 0.876665] cpuidle: using governor menu
[ 0.876670] No iBFT detected.
[ 0.877036] TCP cubic registered
[ 0.877194] NET: Registered protocol family 10
[ 0.877915] Mobile IPv6
[ 0.877918] NET: Registered protocol family 17
[ 0.877932] Using IPI No-Shortcut mode
[ 0.877995] PM: Resume from disk failed.
[ 0.878007] registered taskstats version 1
[ 0.878396] rtc_cmos 00:09: setting system clock to 2012-05-19 10:19:07 UTC (1337422747)
[ 0.878458] Initalizing network drop monitor service
[ 0.878482] Freeing unused kernel memory: 380k freed
[ 0.878672] Write protecting the kernel text: 2508k
[ 0.878693] Write protecting the kernel read-only data: 920k
[ 0.895000] udev[46]: starting version 164
[ 0.898004] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.141421] SCSI subsystem initialized
[ 1.158597] usbcore: registered new interface driver usbfs
[ 1.158732] usbcore: registered new interface driver hub
[ 1.158870] usbcore: registered new device driver usb
[ 1.199333] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.199377] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.199394] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.199398] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.199418] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.199457] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.203340] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.203358] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0980000
[ 1.207269] libata version 3.00 loaded.
[ 1.224179] tg3.c:v3.116 (December 3, 2010)
[ 1.224199] tg3 0000:10:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.224209] tg3 0000:10:00.0: setting latency timer to 64
[ 1.226540] sdhci: Secure Digital Host Controller Interface driver
[ 1.226543] sdhci: Copyright(c) Pierre Ossman
[ 1.232013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.232036] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.232040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.232042] usb usb1: Product: EHCI Host Controller
[ 1.232045] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.232047] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.232133] usb usb1: configuration #1 chosen from 1 choice
[ 1.232170] hub 1-0:1.0: USB hub found
[ 1.232178] hub 1-0:1.0: 8 ports detected
[ 1.232711] ata_piix 0000:00:1f.1: version 2.13
[ 1.232722] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.232759] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.233234] sdhci-pci 0000:02:06.4: SDHCI controller found [104c:8034] (rev 0)
[ 1.233251] sdhci-pci 0000:02:06.4: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.233337] Registered led device: mmc0::
[ 1.233410] mmc0: SDHCI controller on PCI [0000:02:06.4] using PIO
[ 1.233472] Registered led device: mmc1::
[ 1.233523] mmc1: SDHCI controller on PCI [0000:02:06.4] using PIO
[ 1.233585] Registered led device: mmc2::
[ 1.233635] mmc2: SDHCI controller on PCI [0000:02:06.4] using PIO
[ 1.235437] scsi0 : ata_piix
[ 1.235948] scsi1 : ata_piix
[ 1.238352] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2580 irq 14
[ 1.238356] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2588 irq 15
[ 1.244449] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.244458] ACPI: Thermal Zone [TZ1] (41 C)
[ 1.248090] ata2: port disabled. ignoring.
[ 1.324252] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.324298] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.324307] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.324312] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.324324] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.324352] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002000
[ 1.324394] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.324398] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.324401] usb usb2: Product: UHCI Host Controller
[ 1.324404] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.324406] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.324526] usb usb2: configuration #1 chosen from 1 choice
[ 1.324595] hub 2-0:1.0: USB hub found
[ 1.324603] hub 2-0:1.0: 2 ports detected
[ 1.324655] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.324662] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.324665] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.324673] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.324706] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00002020
[ 1.324742] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.324745] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.324748] usb usb3: Product: UHCI Host Controller
[ 1.324751] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.324753] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.324851] usb usb3: configuration #1 chosen from 1 choice
[ 1.324915] hub 3-0:1.0: USB hub found
[ 1.324922] hub 3-0:1.0: 2 ports detected
[ 1.324974] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.324980] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.324984] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.324992] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.325024] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[ 1.325057] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.325060] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.325063] usb usb4: Product: UHCI Host Controller
[ 1.325065] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.325068] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.325163] usb usb4: configuration #1 chosen from 1 choice
[ 1.325227] hub 4-0:1.0: USB hub found
[ 1.325235] hub 4-0:1.0: 2 ports detected
[ 1.339333] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.339342] ACPI: Thermal Zone [TZ2] (28 C)
[ 1.340118] tg3 0000:10:00.0: eth0: Tigon3 [partno(BCM95751M) rev 4101] (PCI Express) MAC address 00:15:60:bc:b6:e1
[ 1.340124] tg3 0000:10:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.340128] tg3 0000:10:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.340132] tg3 0000:10:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.349064] thermal LNXTHERM:03: registered as thermal_zone2
[ 1.349073] ACPI: Thermal Zone [TZ3] (16 C)
[ 1.352755] thermal LNXTHERM:04: registered as thermal_zone3
[ 1.352763] ACPI: Thermal Zone [TZ4] (39 C)
[ 1.416355] ata1.00: ATA-6: ST96812A, 3.05, max UDMA/100
[ 1.416359] ata1.00: 117210240 sectors, multi 16: LBA
[ 1.416398] ata1.01: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, 0C07, max MWDMA2
[ 1.432317] ata1.00: configured for UDMA/100
[ 1.448266] ata1.01: configured for MWDMA2
[ 1.448829] scsi 0:0:0:0: Direct-Access ATA ST96812A 3.05 PQ: 0 ANSI: 5
[ 1.450940] scsi 0:0:1:0: CD-ROM HL-DT-ST RW/DVD GCC-4246N 0C07 PQ: 0 ANSI: 5
[ 1.478433] fan PNP0C0B:00: registered as cooling_device0
[ 1.478442] ACPI: Fan [C253] (off)
[ 1.478784] fan PNP0C0B:01: registered as cooling_device1
[ 1.478791] ACPI: Fan [C254] (off)
[ 1.479109] fan PNP0C0B:02: registered as cooling_device2
[ 1.479117] ACPI: Fan [C255] (off)
[ 1.479430] fan PNP0C0B:03: registered as cooling_device3
[ 1.479436] ACPI: Fan [C256] (off)
[ 1.485853] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.485912] sd 0:0:0:0: [sda] Write Protect is off
[ 1.485915] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.485940] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.486090] sda: sda1 sda2 < sda5 > sda3 sda4
[ 1.524016] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.524972] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.524975] Uniform CD-ROM driver Revision: 3.20
[ 1.525226] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.534766] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.535354] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 2.276709] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 3.864850] udev[352]: starting version 164
[ 4.533750] ACPI: WMI: Mapper loaded
[ 4.608987] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 4.608996] ACPI: Sleep Button [C1F0]
[ 4.609332] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 4.609437] ACPI: Lid Switch [C1F1]
[ 4.609533] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.609538] ACPI: Power Button [PWRF]
[ 4.625914] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 4.625923] ACPI: Video Device [C05A] (multi-head: yes rom: no post: no)
[ 4.654693] ACPI: AC Adapter [C175] (on-line)
[ 4.658057] Marking TSC unstable due to TSC halts in idle
[ 4.658970] processor LNXCPU:00: registered as cooling_device4
[ 4.659351] ACPI: Battery Slot [C177] (battery absent)
[ 4.659527] ACPI: Battery Slot [C176] (battery absent)
[ 4.659965] Switching to clocksource hpet
[ 4.693294] intel_rng: FWH not detected
[ 4.807031] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.847714] NET: Registered protocol family 23
[ 4.856987] lib80211: common routines for IEEE802.11 drivers
[ 4.856990] lib80211_crypt: registered algorithm 'NULL'
[ 4.891710] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:0944]
[ 4.891733] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[ 4.891740] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
[ 4.891742] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[ 4.891749] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01111b22, devctl 0x64
[ 4.918157] tpm_inf_pnp 00:05: Found C1BA with ID IFX0101
[ 4.918208] tpm_inf_pnp 00:05: TPM found: config base 0x560, data base 0x570, chip version 0x0006, vendor id 0x15d1 (Infineon), product id 0x0006 (SLD 9630 TT 1.1)
[ 5.120888] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
[ 5.120893] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[ 5.120898] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 5.120907] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
[ 5.120912] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x6000-0x6fff: clean.
[ 5.121166] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xd0400000 - 0xd07fffff
[ 5.121170] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
[ 5.121665] tifm_7xx1 0000:02:06.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.144028] tifm_core: MMC/SD card detected in socket 0:3
[ 5.520272] found SMC SuperIO Chip (devid=0x7a rev=00 base=0x004e): LPC47N227
[ 5.520295] smsc_superio_flat(): fir: 0x100, sir: 0x3e8, dma: 03, irq: 3, mode: 0x0e
[ 5.520300] smsc_ircc_present: can't get sir_base of 0x3e8
[ 5.803494] parport_pc 00:04: reported by Plug and Play ACPI
[ 5.803562] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 5.810787] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 5.810790] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 5.910698] mmc3: new SD card at address 0002
[ 6.021107] [drm] Initialized drm 1.1.0 20060810
[ 6.146325] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 6.146328] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 6.146412] ipw2200 0000:02:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 6.146481] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 6.146534] ipw2200 0000:02:04.0: firmware: requesting ipw2200-bss.fw
[ 6.185540] mmcblk0: mmc3:0002 00000 1.86 GiB
[ 6.185592] mmcblk0: p1
[ 6.294097] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.294103] i915 0000:00:02.0: setting latency timer to 64
[ 6.298855] [drm] set up 7M of stolen space
[ 6.480877] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 6.482560] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 6.483240] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 6.483839] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 6.484677] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 6.698774] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000/0x0
[ 6.698780] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 6.740676] ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[ 6.740728] ipw2200: Unable to load firmware: -2
[ 6.740773] ipw2200: failed to register network device
[ 6.741035] ipw2200 0000:02:04.0: PCI INT A disabled
[ 6.741051] ipw2200: probe of 0000:02:04.0 failed with error -5
[ 6.754186] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 6.766629] [drm] initialized overlay support
[ 7.562159] Console: switching to colour frame buffer device 128x48
[ 7.567503] fb0: inteldrmfb frame buffer device
[ 7.567505] registered panic notifier
[ 7.567650] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.567710] Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 7.567727] Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
[ 7.572779] Intel ICH 0000:00:1e.2: power state changed by ACPI to D0
[ 7.572835] Intel ICH 0000:00:1e.2: power state changed by ACPI to D0
[ 7.572845] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 7.572867] Intel ICH 0000:00:1e.2: setting latency timer to 64
[ 8.496029] intel8x0_measure_ac97_clock: measured 55412 usecs (2670 samples)
[ 8.496033] intel8x0: clocking to 48000
[ 9.264345] loop: module loaded
[ 9.974985] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.232548] PPP generic driver version 2.4.2
[ 11.114450] fuse init (API version 7.13)
[ 12.164353] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input7
[ 12.533294] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
[ 14.710703] apm: BIOS not found.
[ 15.712717] Bluetooth: Core ver 2.15
[ 15.712769] NET: Registered protocol family 31
[ 15.712772] Bluetooth: HCI device and connection manager initialized
[ 15.712775] Bluetooth: HCI socket layer initialized
[ 15.757311] Bluetooth: L2CAP ver 2.14
[ 15.757314] Bluetooth: L2CAP socket layer initialized
[ 15.768080] Bluetooth: RFCOMM TTY layer initialized
[ 15.768084] Bluetooth: RFCOMM socket layer initialized
[ 15.768086] Bluetooth: RFCOMM ver 1.11
[ 15.929741] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.929744] Bluetooth: BNEP filters: protocol multicast
[ 15.963521] Bridge firewalling registered
[ 16.083040] Bluetooth: SCO (Voice Link) ver 0.6
[ 16.083043] Bluetooth: SCO socket layer initialized
[ 16.298631] lp0: using parport0 (interrupt-driven).
[ 16.454827] ppdev: user-space parallel port driver
[ 33.153155] UDF-fs: No VRS found
[ 33.153161] UDF-fs: No partition found (1)
[ 33.175243] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 33.302137] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 33.315236] ISO 9660 Extensions: RRIP_1991A
[ 96.052059] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 96.324106] usb 3-2: New USB device found, idVendor=03f0, idProduct=011d
[ 96.324114] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 96.324121] usb 3-2: Product: HP integrated Bluetooth module
[ 96.324127] usb 3-2: Manufacturer: Broadcom
[ 96.324312] usb 3-2: configuration #1 chosen from 1 choice
[ 96.422021] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 96.423379] usbcore: registered new interface driver btusb
[ 165.064074] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 165.199042] usb 1-3: New USB device found, idVendor=3538, idProduct=0054
[ 165.199050] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 165.199058] usb 1-3: Product: USB Mass Storage Device
[ 165.199063] usb 1-3: Manufacturer: P Technology
[ 165.199069] usb 1-3: SerialNumber: 000000000000EF
[ 165.200520] usb 1-3: configuration #1 chosen from 1 choice
[ 165.534160] Initializing USB Mass Storage driver...
[ 165.534284] scsi2 : SCSI emulation for USB Mass Storage devices
[ 165.534414] usbcore: registered new interface driver usb-storage
[ 165.534417] USB Mass Storage support registered.
[ 165.535768] usb-storage: device found at 3
[ 165.535771] usb-storage: waiting for device to settle before scanning
[ 170.532220] usb-storage: device scan complete
[ 170.533338] scsi 2:0:0:0: Direct-Access Generic USB Flash Disk 0.00 PQ: 0 ANSI: 2
[ 170.535317] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 170.536679] sd 2:0:0:0: [sdb] 1966079 512-byte logical blocks: (1.00 GB/959 MiB)
[ 170.537551] sd 2:0:0:0: [sdb] Write Protect is off
[ 170.537560] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 170.537566] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 170.542752] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 170.542762] sdb: sdb1
[ 170.619548] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 170.619558] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 171.023984] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!