Добрый день всем!
Сразу напишу, что в мире Линукса не новичок, но эту проблему пока что не решил.
Итак, имею нетбук Acer Aspire One 722. В нем стоит модуль Wi-Fi, который официальным методом (http://wiki.debian.org/HowToIdentifyADevice) определился, как
К сожалению, гугление ничего не дало. Как заставить это устройство работать в Debian? Информация на http://wiki.debian.org/ath9k показывает, что драйвера для этого модуля есть в Wheezy. В Squeeze же еще его нет. Можно ли как-то это исправить?
P.S. на вопрос, почему не ставлю Wheezy или просто не обновлю ядро, отвечаю сразу - такое делал. При загрузке экран просто становится белым и покрывается рябью. Возможно что-то нужно было сделать с иксами, не знаю. Если кто-то поможет разобраться с Wi-Fi и с иксами, то готов установить Wheezy или просто новое ядро.
P.P.S. на нетбуке стоит второй системой Ubuntu 12, поэтому с Debian можно "рисковать". Если что-то не получится, то с Ubuntu напишу.
Продолжу тему. Решил поставить всё же Wheezy. Wi-Fi определился еще на этапе установки и предложил выбрать подключение из Ethernet или Wi-Fi. Причем, названия карточек были правильны. Я обрадовался. Установил систему. Сразу оговорюсь. Когда дошло дело до выбора программного обеспечения, выбрал галочками лишь Стандартные утилиты, Ноутбук (потому что у меня действительно нетбук, а не стационарный компьютер) и SSH сервер. Последний поставил, потому что подозревал, что будут проблемы с "иксами" и хоть через SSH смогу что-то настроить. Установка прошла успешно. Устанавливал в "Графическом режиме".
После перезагрузки ноутбук загружается. Не имеет разницы, выбираю ли я обычную загрузку или "режим восстановления" в определенный момент экран покрывается "рябью". Скриншоты ниже представлю. Ноутбук на нажатия реагирует. "Вслепую" перехожу через Ctrl + Alt + F1 в консоль, авторизуюсь под root, ввожу команду reboot и перезагрузка срабатывает. Сработал и update-grub (добавился пункт загрузки Ubuntu на соседнем разделе. Кстати, с нее сейчас и пишу). То есть я понимаю, что что-то рушится, но, мне кажется, что это можно исправить. Помогите, please!
К сожалению, даже после выполнения команды cat /var/log/Xorg.0.log файла по адресу /var/log/Xorg.0.log не обнаружил. А вот вывод dmesg записал.
Показать
text
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-686-pae (Debian 3.2.15-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-3) ) #1 SMP Sun Apr 15 17:56:31 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000de63a000 (usable)
[ 0.000000] BIOS-e820: 00000000de63a000 - 00000000de83a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000de83a000 - 00000000dfd3f000 (usable)
[ 0.000000] BIOS-e820: 00000000dfd3f000 - 00000000dfdbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000dfdbf000 - 00000000dfebf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfebf000 - 00000000dfef6000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef6000 - 00000000dff00000 (usable)
[ 0.000000] BIOS-e820: 00000000dff00000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000010f000000 (usable)
[ 0.000000] BIOS-e820: 000000010f000000 - 000000011f000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Acer AO722/JE10-BZ, BIOS V1.08 12/06/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x10f000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DFEBD000 mask FFFFFF000 uncachable
[ 0.000000] 4 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fe1b0] fe1b0
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 36d76000 - 376b3000
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT dfef5120 00064 (v01 ACRSYS ACRPRDCT 00000003 01000013)
[ 0.000000] ACPI: FACP dfef4000 000F4 (v04 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: DSDT dfee8000 089F9 (v01 ACRSYS ACRPRDCT F0000000 1025 00040000)
[ 0.000000] ACPI: FACS dfe97000 00040
[ 0.000000] ACPI: HPET dfef3000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC dfef2000 00084 (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG dfef1000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: BOOT dfee7000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SLIC dfee6000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT dfee5000 0030C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT dfee3000 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3446MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0010f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000de63a
[ 0.000000] 0: 0x000de83a -> 0x000dfd3f
[ 0.000000] 0: 0x000dfef6 -> 0x000dff00
[ 0.000000] 0: 0x00100000 -> 0x0010f000
[ 0.000000] On node 0 totalpages: 977624
[ 0.000000] free_area_init_node: node 0, pgdat c1415d40, node_mem_map f4b96200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 6893 pages used for memmap
[ 0.000000] HighMem zone: 743006 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f4800000 s33024 r0 d24320 u524288
[ 0.000000] pcpu-alloc: s33024 r0 d24320 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 968951
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=29856f14-e30a-4fdf-a16f-c3dddbb27936 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0010f000)
[ 0.000000] Memory: 3860008k/4440064k available (2841k kernel code, 50488k reserved, 1372k data, 412k init, 2999596k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141e000 - 0xc1485000 ( 412 kB)
[ 0.000000] .data : 0xc12c65ac - 0xc141d600 (1372 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c65ac (2841 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f4406000 soft=f4408000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 997.337 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 1994.67 BogoMIPS (lpj=3989348)
[ 0.004018] pid_max: default: 32768 minimum: 301
[ 0.004121] Security Framework initialized
[ 0.004134] AppArmor: AppArmor disabled by boot time parameter
[ 0.004179] Mount-cache hash table entries: 512
[ 0.004480] Initializing cgroup subsys cpuacct
[ 0.004497] Initializing cgroup subsys memory
[ 0.004520] Initializing cgroup subsys devices
[ 0.004527] Initializing cgroup subsys freezer
[ 0.004533] Initializing cgroup subsys net_cls
[ 0.004539] Initializing cgroup subsys blkio
[ 0.004556] Initializing cgroup subsys perf_event
[ 0.004628] CPU: Physical Processor ID: 0
[ 0.004634] CPU: Processor Core ID: 0
[ 0.004642] mce: CPU supports 6 MCE banks
[ 0.008877] ACPI: Core revision 20110623
[ 0.024130] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024590] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.066930] CPU0: AMD C-60 APU with Radeon(tm) HD Graphics stepping 00
[ 0.068003] Performance Events: AMD PMU driver.
[ 0.068003] ... version: 0
[ 0.068003] ... bit width: 48
[ 0.068003] ... generic registers: 4
[ 0.068003] ... value mask: 0000ffffffffffff
[ 0.068003] ... max period: 00007fffffffffff
[ 0.068003] ... fixed-purpose events: 0
[ 0.068003] ... event mask: 000000000000000f
[ 0.068003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068003] CPU 1 irqstacks, hard=f4494000 soft=f4496000
[ 0.068003] Booting Node 0, Processors #1
[ 0.068003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.156063] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156125] Brought up 2 CPUs
[ 0.156132] Total of 2 processors activated (3989.67 BogoMIPS).
[ 0.157034] devtmpfs: initialized
[ 0.157034] PM: Registering ACPI NVS region at de63a000 (2097152 bytes)
[ 0.157034] PM: Registering ACPI NVS region at dfdbf000 (1048576 bytes)
[ 0.157034] print_constraints: dummy:
[ 0.157034] NET: Registered protocol family 16
[ 0.157277] Extended Config Space enabled on 0 nodes
[ 0.157326] ACPI: bus type pci registered
[ 0.157529] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.157540] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.157546] PCI: Using MMCONFIG for extended config space
[ 0.157552] PCI: Using configuration type 1 for base access
[ 0.161424] bio: create slab <bio-0> at 0
[ 0.161424] ACPI: Added _OSI(Module Device)
[ 0.161424] ACPI: Added _OSI(Processor Device)
[ 0.161424] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.161424] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.165394] ACPI: EC: Look up EC in DSDT
[ 0.168706] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.175780] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.193201] ACPI: Interpreter enabled
[ 0.193218] ACPI: (supports S0 S3 S4 S5)
[ 0.193274] ACPI: Using IOAPIC for interrupt routing
[ 0.344893] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.345249] ACPI: No dock devices found.
[ 0.345255] HEST: Table not found.
[ 0.345264] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.345510] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.345899] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.345906] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.345913] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.345919] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.345925] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.345931] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.345936] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.345942] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.345948] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.345953] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.345959] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.345964] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.345970] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.345975] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.345981] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.345986] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[ 0.345992] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xffffffff]
[ 0.346009] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
[ 0.346038] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
[ 0.346106] pci 0000:00:01.0: [1002:9807] type 0 class 0x000300
[ 0.346125] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.346138] pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff]
[ 0.346150] pci 0000:00:01.0: reg 18: [mem 0xf0400000-0xf043ffff]
[ 0.346222] pci 0000:00:01.0: supports D1 D2
[ 0.346254] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
[ 0.346270] pci 0000:00:01.1: reg 10: [mem 0xf0444000-0xf0447fff]
[ 0.346354] pci 0000:00:01.1: supports D1 D2
[ 0.346486] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.346516] pci 0000:00:11.0: reg 10: [io 0x4118-0x411f]
[ 0.346532] pci 0000:00:11.0: reg 14: [io 0x4124-0x4127]
[ 0.346548] pci 0000:00:11.0: reg 18: [io 0x4110-0x4117]
[ 0.346564] pci 0000:00:11.0: reg 1c: [io 0x4120-0x4123]
[ 0.346580] pci 0000:00:11.0: reg 20: [io 0x4100-0x410f]
[ 0.346597] pci 0000:00:11.0: reg 24: [mem 0xf044c000-0xf044c3ff]
[ 0.346692] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.346718] pci 0000:00:12.0: reg 10: [mem 0xf044b000-0xf044bfff]
[ 0.346837] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.347471] pci 0000:00:12.2: reg 10: [mem 0xf044a000-0xf044a0ff]
[ 0.350807] pci 0000:00:12.2: supports D1 D2
[ 0.350821] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.350835] pci 0000:00:12.2: PME# disabled
[ 0.350898] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.350929] pci 0000:00:13.0: reg 10: [mem 0xf0449000-0xf0449fff]
[ 0.351052] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.351601] pci 0000:00:13.2: reg 10: [mem 0xf0448000-0xf04480ff]
[ 0.354710] pci 0000:00:13.2: supports D1 D2
[ 0.354724] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.354738] pci 0000:00:13.2: PME# disabled
[ 0.354799] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.354934] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.354975] pci 0000:00:14.2: reg 10: [mem 0xf0440000-0xf0443fff 64bit]
[ 0.355083] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.355094] pci 0000:00:14.2: PME# disabled
[ 0.355122] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.355248] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.355339] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.355476] pci 0000:00:15.0: supports D1 D2
[ 0.355527] pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604
[ 0.355657] pci 0000:00:15.2: supports D1 D2
[ 0.355707] pci 0000:00:15.3: [1002:43a3] type 1 class 0x000604
[ 0.356069] pci 0000:00:15.3: supports D1 D2
[ 0.356123] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[ 0.356194] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[ 0.356256] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[ 0.356321] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[ 0.356402] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[ 0.356464] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[ 0.356526] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[ 0.356588] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[ 0.356748] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.356770] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.356778] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.356787] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.356795] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.356804] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.356812] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.356820] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.356828] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.356836] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.356844] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.356852] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.356860] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.356868] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.356876] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.356884] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.356892] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xffffffff] (subtractive decode)
[ 0.357023] pci 0000:00:15.0: PCI bridge to [bus 02-05]
[ 0.357037] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff]
[ 0.357047] pci 0000:00:15.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.357061] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.357178] pci 0000:06:00.0: [1969:2062] type 0 class 0x000200
[ 0.357219] pci 0000:06:00.0: reg 10: [mem 0xf0200000-0xf023ffff 64bit]
[ 0.357242] pci 0000:06:00.0: reg 18: [io 0x2000-0x207f]
[ 0.357405] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.357417] pci 0000:06:00.0: PME# disabled
[ 0.364108] pci 0000:00:15.2: PCI bridge to [bus 06-06]
[ 0.364126] pci 0000:00:15.2: bridge window [io 0x2000-0x2fff]
[ 0.364136] pci 0000:00:15.2: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.364278] pci 0000:07:00.0: [168c:0032] type 0 class 0x000280
[ 0.364323] pci 0000:07:00.0: reg 10: [mem 0xf0100000-0xf017ffff 64bit]
[ 0.364404] pci 0000:07:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[ 0.364503] pci 0000:07:00.0: supports D1 D2
[ 0.364508] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364522] pci 0000:07:00.0: PME# disabled
[ 0.372108] pci 0000:00:15.3: PCI bridge to [bus 07-07]
[ 0.372129] pci 0000:00:15.3: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.372173] pci_bus 0000:00: on NUMA node 0
[ 0.372190] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.372487] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
[ 0.372565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB2._PRT]
[ 0.372661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB3._PRT]
[ 0.372804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.372904] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.372913] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.372918] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.396271] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.396600] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.396917] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.397173] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.397469] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.397726] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.397983] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.398215] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.398643] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.398643] vgaarb: loaded
[ 0.398643] vgaarb: bridge control possible 0000:00:01.0
[ 0.398643] PCI: Using ACPI for IRQ routing
[ 0.401951] PCI: pci_cache_line_size set to 64 bytes
[ 0.402142] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.402151] reserve RAM buffer: 00000000de63a000 - 00000000dfffffff
[ 0.402162] reserve RAM buffer: 00000000dfd3f000 - 00000000dfffffff
[ 0.402171] reserve RAM buffer: 00000000dff00000 - 00000000dfffffff
[ 0.402178] reserve RAM buffer: 000000010f000000 - 000000010fffffff
[ 0.402568] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.402582] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.404064] Switching to clocksource hpet
[ 0.408000] pnp: PnP ACPI init
[ 0.408140] ACPI: bus type pnp registered
[ 0.408499] pnp 00:00: [bus 00-ff]
[ 0.408509] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.408517] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.408525] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.408533] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.408540] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.408547] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.408554] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.408561] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.408568] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.408574] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.408581] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.408588] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.408594] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.408601] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.408608] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.408615] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[ 0.408622] pnp 00:00: [mem 0xfc000000-0xffffffff window]
[ 0.408628] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.408787] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.408943] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.408951] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.409097] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.409107] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.409117] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.409524] pnp 00:02: [irq 0 disabled]
[ 0.409618] pnp 00:02: [irq 8]
[ 0.409625] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.409717] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.409921] pnp 00:03: [io 0x0000-0x000f]
[ 0.409929] pnp 00:03: [io 0x0081-0x008f]
[ 0.409935] pnp 00:03: [io 0x00c0-0x00df]
[ 0.409946] pnp 00:03: [dma 4]
[ 0.410046] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.410076] pnp 00:04: [io 0x00f0-0x00fe]
[ 0.410159] pnp 00:04: [irq 13]
[ 0.410260] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.410359] pnp 00:05: [io 0x0070-0x0071]
[ 0.410474] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.410503] pnp 00:06: [io 0x0061]
[ 0.410598] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.410678] pnp 00:07: [io 0x0060]
[ 0.410685] pnp 00:07: [io 0x0064]
[ 0.410768] pnp 00:07: [irq 1]
[ 0.410865] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.411245] pnp 00:08: [irq 12]
[ 0.411351] pnp 00:08: Plug and Play ACPI device, IDs ETD0500 ETD0001 PNP0f13 (active)
[ 0.411436] pnp 00:09: [io 0x0010-0x001f]
[ 0.411443] pnp 00:09: [io 0x002e-0x002f]
[ 0.411450] pnp 00:09: [io 0x0072-0x0073]
[ 0.411456] pnp 00:09: [io 0x0080]
[ 0.411461] pnp 00:09: [io 0x00b0-0x00b1]
[ 0.411467] pnp 00:09: [io 0x0092]
[ 0.411473] pnp 00:09: [io 0x0400-0x04cf]
[ 0.411479] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.411485] pnp 00:09: [io 0x04d6]
[ 0.411491] pnp 00:09: [io 0x0680-0x06ff]
[ 0.411497] pnp 00:09: [io 0x077a]
[ 0.411503] pnp 00:09: [io 0x0c00-0x0c01]
[ 0.411508] pnp 00:09: [io 0x0c14]
[ 0.411514] pnp 00:09: [io 0x0c50-0x0c52]
[ 0.411520] pnp 00:09: [io 0x0c6c]
[ 0.411525] pnp 00:09: [io 0x0c6f]
[ 0.411531] pnp 00:09: [io 0x0cd0-0x0cdb]
[ 0.411701] system 00:09: [io 0x0400-0x04cf] has been reserved
[ 0.411711] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.411719] system 00:09: [io 0x04d6] has been reserved
[ 0.411727] system 00:09: [io 0x0680-0x06ff] has been reserved
[ 0.411735] system 00:09: [io 0x077a] has been reserved
[ 0.411743] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.411751] system 00:09: [io 0x0c14] has been reserved
[ 0.411759] system 00:09: [io 0x0c50-0x0c52] has been reserved
[ 0.411767] system 00:09: [io 0x0c6c] has been reserved
[ 0.411774] system 00:09: [io 0x0c6f] has been reserved
[ 0.411782] system 00:09: [io 0x0cd0-0x0cdb] has been reserved
[ 0.411792] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411923] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[ 0.411931] pnp 00:0a: [mem 0xffe00000-0xffffffff]
[ 0.412121] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.412132] system 00:0a: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.412141] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.476132] pnp: PnP ACPI: found 11 devices
[ 0.476141] ACPI: ACPI bus type pnp unregistered
[ 0.476147] PnPBIOS: Disabled by ACPI PNP
[ 0.525177] pci 0000:07:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.525193] PCI: max bus depth: 1 pci_try_num: 2
[ 0.525317] pci 0000:00:15.3: BAR 15: assigned [mem 0xf0500000-0xf05fffff pref]
[ 0.525327] pci 0000:00:14.4: PCI bridge to [bus 01-01]
[ 0.525351] pci 0000:00:15.0: PCI bridge to [bus 02-05]
[ 0.525360] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff]
[ 0.525372] pci 0000:00:15.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.525383] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.525398] pci 0000:00:15.2: PCI bridge to [bus 06-06]
[ 0.525407] pci 0000:00:15.2: bridge window [io 0x2000-0x2fff]
[ 0.525419] pci 0000:00:15.2: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.525438] pci 0000:07:00.0: BAR 6: assigned [mem 0xf0500000-0xf050ffff pref]
[ 0.525447] pci 0000:00:15.3: PCI bridge to [bus 07-07]
[ 0.525459] pci 0000:00:15.3: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.525469] pci 0000:00:15.3: bridge window [mem 0xf0500000-0xf05fffff pref]
[ 0.525535] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.525546] pci 0000:00:15.0: setting latency timer to 64
[ 0.525562] pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.525572] pci 0000:00:15.2: setting latency timer to 64
[ 0.525587] pci 0000:00:15.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.525597] pci 0000:00:15.3: setting latency timer to 64
[ 0.525607] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.525614] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.525622] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.525629] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.525636] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.525643] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.525651] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.525658] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.525665] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.525672] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.525679] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.525686] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.525693] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.525700] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.525708] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff]
[ 0.525715] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xffffffff]
[ 0.525723] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.525730] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.525737] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.525744] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.525751] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.525758] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.525765] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.525772] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.525780] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.525787] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.525794] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.525801] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.525808] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.525815] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
[ 0.525822] pci_bus 0000:01: resource 18 [mem 0xe0000000-0xf7ffffff]
[ 0.525829] pci_bus 0000:01: resource 19 [mem 0xfc000000-0xffffffff]
[ 0.525837] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.525844] pci_bus 0000:02: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.525851] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.525859] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.525866] pci_bus 0000:06: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.525873] pci_bus 0000:07: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.525880] pci_bus 0000:07: resource 2 [mem 0xf0500000-0xf05fffff pref]
[ 0.526101] NET: Registered protocol family 2
[ 0.526417] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.527163] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.528163] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.528593] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.528602] TCP reno registered
[ 0.528613] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.528635] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.529057] NET: Registered protocol family 1
[ 0.529101] pci 0000:00:01.0: Boot video device
[ 0.529232] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.054481] pci 0000:00:12.0: PCI INT A disabled
[ 1.054554] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.068113] pci 0000:00:12.2: PCI INT B disabled
[ 1.068153] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.140340] pci 0000:00:13.0: PCI INT A disabled
[ 1.140375] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.156348] pci 0000:00:13.2: PCI INT B disabled
[ 1.156429] PCI: CLS 64 bytes, default 64
[ 1.156566] Unpacking initramfs...
[ 1.863500] Freeing initrd memory: 9460k freed
[ 1.870692] Simple Boot Flag at 0x44 set to 0x1
[ 1.871843] perf: AMD IBS detected (0x000000ff)
[ 1.872772] audit: initializing netlink socket (disabled)
[ 1.872805] type=2000 audit(1336462824.872:1): initialized
[ 1.926030] highmem bounce pool size: 64 pages
[ 1.926048] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.958455] VFS: Disk quotas dquot_6.5.2
[ 1.958633] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.958905] msgmni has been set to 1698
[ 1.960047] alg: No test for stdrng (krng)
[ 1.960163] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.960175] io scheduler noop registered
[ 1.960181] io scheduler deadline registered
[ 1.960222] io scheduler cfq registered (default)
[ 1.960821] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.960903] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.960911] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.961832] ERST: Table is not found!
[ 1.961837] GHES: HEST is not enabled!
[ 1.961876] isapnp: Scanning for PnP cards...
[ 2.377456] isapnp: No Plug & Play device found
[ 2.377876] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.385436] Linux agpgart interface v0.103
[ 2.385908] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
[ 2.432426] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.432449] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.433287] mousedev: PS/2 mouse device common for all mice
[ 2.434354] rtc_cmos 00:05: RTC can wake from S4
[ 2.434916] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.435040] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.435079] cpuidle: using governor ladder
[ 2.435086] cpuidle: using governor menu
[ 2.435723] TCP cubic registered
[ 2.435995] NET: Registered protocol family 10
[ 2.437526] Mobile IPv6
[ 2.437534] NET: Registered protocol family 17
[ 2.437547] Registering the dns_resolver key type
[ 2.437598] Using IPI No-Shortcut mode
[ 2.438580] PM: Hibernation image not present or could not be loaded.
[ 2.438630] registered taskstats version 1
[ 2.454421] rtc_cmos 00:05: setting system clock to 2012-05-08 07:40:26 UTC (1336462826)
[ 2.454604] Initializing network drop monitor service
[ 2.454923] Freeing unused kernel memory: 412k freed
[ 2.455608] Write protecting the kernel text: 2844k
[ 2.455816] Write protecting the kernel read-only data: 1112k
[ 2.455822] NX-protecting the kernel data: 3300k
[ 2.475938] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.505145] udevd[49]: starting version 175
[ 2.619871] usbcore: registered new interface driver usbfs
[ 2.619940] usbcore: registered new interface driver hub
[ 2.658320] usbcore: registered new device driver usb
[ 2.659467] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.659599] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.659715] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 2.659725] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.659792] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.659881] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.659935] QUIRK: Enable AMD PLL fix
[ 2.660187] ehci_hcd 0000:00:12.2: debug port 1
[ 2.660244] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf044a000
[ 2.668592] SCSI subsystem initialized
[ 2.674181] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.674285] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.674295] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.674303] usb usb1: Product: EHCI Host Controller
[ 2.674309] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 2.674316] usb usb1: SerialNumber: 0000:00:12.2
[ 2.674715] hub 1-0:1.0: USB hub found
[ 2.674731] hub 1-0:1.0: 5 ports detected
[ 2.675083] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.675206] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 2.675215] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.675247] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.675332] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.675387] ehci_hcd 0000:00:13.2: debug port 1
[ 2.675419] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf0448000
[ 2.684139] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.684235] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.684245] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.684253] usb usb2: Product: EHCI Host Controller
[ 2.684260] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 2.684267] usb usb2: SerialNumber: 0000:00:13.2
[ 2.684620] hub 2-0:1.0: USB hub found
[ 2.684637] hub 2-0:1.0: 5 ports detected
[ 2.685771] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.685894] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.686011] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 2.686021] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.686050] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 2.686192] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf044b000
[ 2.689901] atl1c 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.689929] atl1c 0000:06:00.0: setting latency timer to 64
[ 2.696347] libata version 3.00 loaded.
[ 2.744187] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.744200] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.744208] usb usb3: Product: OHCI Host Controller
[ 2.744215] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 2.744221] usb usb3: SerialNumber: 0000:00:12.0
[ 2.744585] hub 3-0:1.0: USB hub found
[ 2.744674] hub 3-0:1.0: 5 ports detected
[ 2.744928] ahci 0000:00:11.0: version 3.0
[ 2.745049] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.745246] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 2.745257] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.751903] scsi0 : ahci
[ 2.752306] ata1: SATA max UDMA/133 abar m1024@0xf044c000 port 0xf044c100 irq 19
[ 2.752475] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.752605] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 2.752615] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.752653] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 2.752774] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0449000
[ 2.812329] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.812341] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.812349] usb usb4: Product: OHCI Host Controller
[ 2.812356] usb usb4: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 2.812362] usb usb4: SerialNumber: 0000:00:13.0
[ 2.812976] hub 4-0:1.0: USB hub found
[ 2.813000] hub 4-0:1.0: 5 ports detected
[ 2.817567] atl1c 0000:06:00.0: version 1.0.1.0-NAPI
[ 2.868307] Refined TSC clocksource calibration: 997.501 MHz.
[ 2.868324] Switching to clocksource tsc
[ 3.192272] usb 3-2: new low-speed USB device number 2 using ohci_hcd
[ 3.252272] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.254687] ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133
[ 3.254698] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.257244] ata1.00: configured for UDMA/133
[ 3.257783] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0001 PQ: 0 ANSI: 5
[ 3.266491] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.266750] sd 0:0:0:0: [sda] Write Protect is off
[ 3.266766] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.266838] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.361934] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 3.363265] usb 3-2: New USB device found, idVendor=1267, idProduct=02f0
[ 3.363275] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.363281] usb 3-2: Product: Multi-Direction Optical Mouse
[ 3.363881] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.389190] input: Multi-Direction Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input1
[ 3.389540] generic-usb 0003:1267:02F0.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [Multi-Direction Optical Mouse] on usb-0000:00:12.0-2/input0
[ 3.389589] usbcore: registered new interface driver usbhid
[ 3.389594] usbhid: USB HID core driver
[ 3.476187] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.708309] usb 2-1: New USB device found, idVendor=0402, idProduct=7675
[ 3.708319] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 3.708325] usb 2-1: Product: WebCam
[ 3.708330] usb 2-1: Manufacturer: Y2C2308XF
[ 4.645006] PM: Starting manual resume from disk
[ 4.645020] PM: Hibernation image partition 8:6 present
[ 4.645026] PM: Looking for hibernation image.
[ 4.658782] PM: Image not found (code -22)
[ 4.658790] PM: Hibernation image not present or could not be loaded.
[ 4.737770] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 6.433228] udevd[271]: starting version 175
[ 6.809541] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 6.809559] ACPI: Power Button [PWRB]
[ 6.809748] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 6.809759] ACPI: Sleep Button [SLPB]
[ 6.810000] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 6.810162] ACPI: Lid Switch [LID]
[ 6.810351] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.810361] ACPI: Power Button [PWRF]
[ 6.823581] ACPI: acpi_idle registered with cpuidle
[ 6.877424] wmi: Mapper loaded
[ 6.972498] acpi device:01: registered as cooling_device2
[ 6.972735] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 6.972756] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 7.018937] Linux media interface: v0.10
[ 7.060104] ACPI: Battery Slot [BAT1] (battery absent)
[ 7.061415] ACPI: AC Adapter [ACAD] (on-line)
[ 7.183600] [drm] Initialized drm 1.1.0 20060810
[ 7.325622] Linux video capture interface: v2.00
[ 7.348986] uvcvideo: Found UVC 1.00 device WebCam (0402:7675)
[ 7.352327] input: WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input7
[ 7.352620] usbcore: registered new interface driver uvcvideo
[ 7.352629] USB Video Class driver (1.1.1)
[ 7.393412] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 7.417528] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 7.417561] acer_wmi: Function bitmap for Communication Button: 0x801
[ 7.417571] acer_wmi: Brightness must be controlled by generic video driver
[ 7.418360] input: Acer WMI hotkeys as /devices/virtual/input/input9
[ 7.419118] acer_wmi: Get 0x1 Device Status failed: 0xe2 - 0x0
[ 7.420585] acer_wmi: Get 0x800 Device Status failed: 0xe2 - 0x0
[ 7.421363] acer_wmi: Get Current Device Status failed: 0xe2 - 0x0
[ 7.448144] cfg80211: Calling CRDA to update world regulatory domain
[ 7.522305] [drm] radeon defaulting to kernel modesetting.
[ 7.522315] [drm] radeon kernel modesetting enabled.
[ 7.522929] radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.522943] radeon 0000:00:01.0: setting latency timer to 64
[ 7.525102] [drm] initializing kernel modesetting (PALM 0x1002:0x9807 0x1025:0x0598).
[ 7.525275] [drm] register mmio base: 0xF0400000
[ 7.525280] [drm] register mmio size: 262144
[ 7.532269] ATOM BIOS: Acer
[ 7.532335] radeon 0000:00:01.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[ 7.532345] radeon 0000:00:01.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[ 7.532699] [drm] Detected VRAM RAM=256M, BAR=256M
[ 7.532710] [drm] RAM width 32bits DDR
[ 7.533025] [TTM] Zone kernel: Available graphics memory: 435142 kiB.
[ 7.533033] [TTM] Zone highmem: Available graphics memory: 1934940 kiB.
[ 7.533038] [TTM] Initializing pool allocator.
[ 7.533099] [drm] radeon: 256M of VRAM memory ready
[ 7.533105] [drm] radeon: 512M of GTT memory ready.
[ 7.533141] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.533146] [drm] Driver supports precise vblank timestamp query.
[ 7.533213] radeon 0000:00:01.0: irq 40 for MSI/MSI-X
[ 7.533224] radeon 0000:00:01.0: radeon: using MSI.
[ 7.533275] [drm] radeon: irq initialized.
[ 7.533286] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.535078] [drm] Loading PALM Microcode
[ 7.620622] Error: Driver 'pcspkr' is already registered, aborting...
[ 7.641641] ath9k 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 7.641666] ath9k 0000:07:00.0: setting latency timer to 64
[ 7.649715] ath: EEPROM regdomain: 0x65
[ 7.649721] ath: EEPROM indicates we should expect a direct regpair map
[ 7.649732] ath: Country alpha2 being used: 00
[ 7.649737] ath: Regpair used: 0x65
[ 7.869584] r600_cp: Failed to load firmware "radeon/PALM_pfp.bin"
[ 7.869716] [drm:evergreen_startup] *ERROR* Failed to load firmware!
[ 7.869771] radeon 0000:00:01.0: disabling GPU acceleration
[ 7.870894] radeon 0000:00:01.0: f712ca00 unpin not necessary
[ 7.870902] radeon 0000:00:01.0: f712ca00 unpin not necessary
[ 7.871998] [drm] Radeon Display Connectors
[ 7.872031] [drm] Connector 0:
[ 7.872036] [drm] LVDS
[ 7.872041] [drm] HPD1
[ 7.872048] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 7.872054] [drm] Encoders:
[ 7.872059] [drm] LCD1: INTERNAL_UNIPHY
[ 7.872065] [drm] Connector 1:
[ 7.872069] [drm] HDMI-A
[ 7.872072] [drm] HPD2
[ 7.872079] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 7.872084] [drm] Encoders:
[ 7.872088] [drm] DFP1: INTERNAL_UNIPHY
[ 7.872093] [drm] Connector 2:
[ 7.872097] [drm] VGA
[ 7.872103] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 7.872108] [drm] Encoders:
[ 7.872113] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.872162] [drm] Internal thermal controller without fan control
[ 7.872271] [drm] radeon: power management initialized
[ 7.892550] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 7.893927] Registered led device: ath9k-phy0
[ 7.893950] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xf8800000, irq=19
[ 8.153425] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x040213)
[ 8.259524] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x18, 0x0c.
[ 8.347233] [drm] fb mappable at 0xE0040000
[ 8.347243] [drm] vram apper at 0xE0000000
[ 8.347248] [drm] size 4325376
[ 8.347253] [drm] fb depth is 24
[ 8.347258] [drm] pitch is 5632
[ 8.347563] fbcon: radeondrmfb (fb0) is primary device
[ 8.656171] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[ 8.866391] Console: switching to colour frame buffer device 170x48
[ 8.876860] fb0: radeondrmfb frame buffer device
[ 8.876864] drm: registered panic notifier
[ 8.876878] [drm] Initialized radeon 2.12.0 20080528 for 0000:00:01.0 on minor 0
[ 8.877144] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 8.877492] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.877637] snd_hda_intel 0000:00:01.1: irq 40 for MSI/MSI-X
[ 8.877689] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[ 8.912586] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 8.912802] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 8.927419] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 8.927660] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
[ 8.928200] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.928389] snd_hda_intel 0000:00:14.2: setting latency timer to 64
[ 8.964224] hda_codec: CX20588: BIOS auto-probing.
[ 8.965298] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input11
[ 9.177982] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[ 9.880327] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[ 10.137923] Adding 1170428k swap on /dev/sda6. Priority:-1 extents:1 across:1170428k
[ 10.178811] EXT4-fs (sda8): re-mounted. Opts: (null)
[ 10.486245] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[ 10.602144] loop: module loaded
[ 10.609388] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input12
[ 12.688233] atl1c 0000:06:00.0: irq 41 for MSI/MSI-X
[ 12.688380] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 12.762258] RPC: Registered named UNIX socket transport module.
[ 12.762268] RPC: Registered udp transport module.
[ 12.762274] RPC: Registered tcp transport module.
[ 12.762280] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.824166] FS-Cache: Loaded
[ 12.895589] FS-Cache: Netfs 'nfs' registered for caching
[ 12.924114] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 15.475949] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 18.061662] Bluetooth: Core ver 2.16
[ 18.061709] NET: Registered protocol family 31
[ 18.061714] Bluetooth: HCI device and connection manager initialized
[ 18.061721] Bluetooth: HCI socket layer initialized
[ 18.061726] Bluetooth: L2CAP socket layer initialized
[ 18.061737] Bluetooth: SCO socket layer initialized
[ 18.131916] Bluetooth: RFCOMM TTY layer initialized
[ 18.131929] Bluetooth: RFCOMM socket layer initialized
[ 18.131933] Bluetooth: RFCOMM ver 1.11
[ 18.208554] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.208565] Bluetooth: BNEP filters: protocol multicast
[ 18.369688] lp: driver loaded but no devices found
[ 18.404664] ppdev: user-space parallel port driver
[ 20.119789] powernow-k8: Found 1 AMD C-60 APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00)
[ 20.119814] powernow-k8: Core Performance Boosting: on.
[ 20.119890] powernow-k8: 0 : pstate 0 (1000 MHz)
[ 20.119894] powernow-k8: 1 : pstate 1 (800 MHz)
