LinuxForum.Fans
Тема

Не могу найти точку доступа Wi-Fi в Debian

Автор: s3dworld 32 сообщений 6268 просмотров
#234652

Всем доброго утра!

Поставил ночью ОС Ubuntu, сразу видно было точку доступа Wi-Fi и можно было с ней соединиться (ещё во время установки ОС). Но по непонятным мне причинам решил всё же снести Ubuntu и поставить Debian. Сказано, сделано. Решил через консоль подключиться к точке доступа. Network Manager стоит, поэтому ввожу:

text

iwconfig -a

Получаю список устройств (интерфейсов). Этот список у меня равен трём элементам. По сути так и должно быть (наверное), ведь есть сетевая плата, Bluetooth и Wi-Fi (у меня ноутбук HP Pavilion dv6-6b56er). Однако, как пишут в большинства статей, ни одно устройство не называется wlan0 (да и в описаниях устройств нет ничего такого бы, чтобы говорило что оно Wi-Fi). Решил по всем трём устройствам пройтись и вместо NAME ввести их имя:

text

ifconfig NAME up

Следом решил просканировать каждое:

text

iwlist NAME scan

И на каждое устройство он мне вывел что оно не предназначено для сканирования. В общем я нуб в мире Linux. Не пойму что там за устройства у меня...помогите подключиться к моему маршрутизатору.

#234653

Покажите вывод команд

text

iwconfig
text

lspci -k | grep net -A 2
#234655

Я много мучался с Wi-Fi в Дебиане у меня HP dv 6205 .
Светодиод горит а сети - нет! Уходить с дистрибутива
не хотелось как то привык. Случайно нашел CrunchBang Linux
Тот же Debian с OpenBox . Все заработало без каких либо
примочек!! А все что нужно - можно доустановить!
Но по моему система самодостаточна! Главное нет
того что постоянно раздражало в Debiane 6 0 3!!

#234661

Lupo Alberto

Покажите вывод команд
text

sergei@s3dworld:~$ su
Password: 
root@s3dworld:/home/sergei# iwconfig
lo        no wireless extensions.

eth0 no wireless extensions.

pan0 no wireless extensions.

root@s3dworld:/home/sergei# lspci -k | grep net -A 2 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Subsystem: Hewlett-Packard Company Device 3388 Kernel driver in use: r8169 root@s3dworld:/home/sergei#

#234664

s3dworld, карта WiFi у вас точно встроенная?
Покажите

text

dmesg
text

lspci -k
text

cat /etc/udev/rules.d/70-persistent-net.rules

P.S. Проверьте, вы случайно «железно» не отключили WiFi? :o

#234667

Тут сейчас будет кучу текста. Да я уж тыкался с кнопкой fn+wi-fi. Единственное что происходит, так это значок Bluetooth появляется/пропадает. Вот что выдал терминал на указанные выше команды:

Показать

[console]
sergei@s3dworld:~$ su
Password:
root@s3dworld:/home/sergei# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 16:22:28 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=088a1fe2-6f39-4eee-a7e2-6e0248754e43 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000009ce3f000 (usable)
[ 0.000000] BIOS-e820: 000000009ce3f000 - 000000009cebf000 (reserved)
[ 0.000000] BIOS-e820: 000000009cebf000 - 000000009cfbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000009cfbf000 - 000000009cfff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000009cfff000 - 000000009d000000 (usable)
[ 0.000000] BIOS-e820: 000000009d000000 - 000000009fa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001dfe00000 (usable)
[ 0.000000] DMI 2.7 present.
[ 0.000000] last_pfn = 0x1dfe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 09D000000 mask FFF000000 uncachable
[ 0.000000] 3 base 09E000000 mask FFE000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask F80000000 write-back
[ 0.000000] 6 base 180000000 mask FC0000000 write-back
[ 0.000000] 7 base 1C0000000 mask FF0000000 write-back
[ 0.000000] 8 base 1D0000000 mask FF0000000 write-back
[ 0.000000] 9 base 1DFE00000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000009d000000
[ 0.000000] 0000000000 - 009d000000 page 2M
[ 0.000000] kernel direct mapping tables up to 9d000000 @ 8000-c000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001dfe00000
[ 0.000000] 0100000000 - 01dfe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 1dfe00000 @ a000-13000
[ 0.000000] RAMDISK: 3770e000 - 37fefb1b
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 000000009cffe120 00094 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 000000009cfec000 0C553 (v01 HP INSYDE 00000000 MSFT 01000013)
[ 0.000000] ACPI: FACS 000000009cf6c000 00040
[ 0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 000000009cfeb000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009cfea000 0051F (v01 HP INSYDE 00001000 MSFT 01000013)
[ 0.000000] ACPI: BOOT 000000009cfe8000 00028 (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASPT 000000009cfe5000 00034 (v07 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009cfe4000 0094E (v01 HP INSYDE 00003000 INTL 20100121)
[ 0.000000] ACPI: SSDT 000000009cfe3000 00996 (v01 HP INSYDE 00003000 INTL 20100121)
[ 0.000000] ACPI: SSDT 000000009cfe2000 002DA (v01 HP INSYDE 00003000 INTL 20100121)
[ 0.000000] ACPI: SSDT 000000009cfe1000 0035D (v01 HP INSYDE 00003000 INTL 20100121)
[ 0.000000] ACPI: SSDT 000000009cfdb000 024A1 (v01 HP INSYDE 00001000 INTL 20100121)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001dfe00000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001dfe00000
[ 0.000000] NODE_DATA [000000000000e000 - 0000000000015fff]
[ 0.000000] bootmap [0000000000016000 - 0000000000051fbf] pages 3c
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 01dfe00000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00016d95c4] TEXT DATA BSS ==> [0001000000 - 00016d95c4]
[ 0.000000] #3 [003770e000 - 0037fefb1b] RAMDISK ==> [003770e000 - 0037fefb1b]
[ 0.000000] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000]
[ 0.000000] #5 [00016da000 - 00016da2e3] BRK ==> [00016da000 - 00016da2e3]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000e000] PGTABLE ==> [000000a000 - 000000e000]
[ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
[ 0.000000] [ffffea0000000000-ffffea00069fffff] PMD -> [ffff880001800000-ffff880006dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001dfe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0009ce3f
[ 0.000000] 0: 0x0009cfff -> 0x0009d000
[ 0.000000] 0: 0x00100000 -> 0x001dfe00
[ 0.000000] On node 0 totalpages: 1559517
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 107 pages reserved
[ 0.000000] DMA zone: 3834 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 624248 pages, LIFO batch:31
[ 0.000000] Normal zone: 12537 pages used for memmap
[ 0.000000] Normal zone: 904455 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009ce3f000 - 000000009cebf000
[ 0.000000] PM: Registered nosave memory: 000000009cebf000 - 000000009cfbf000
[ 0.000000] PM: Registered nosave memory: 000000009cfbf000 - 000000009cfff000
[ 0.000000] PM: Registered nosave memory: 000000009d000000 - 000000009fa00000
[ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 9fa00000 (gap: 9fa00000:40600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880007000000 s90328 r8192 d24360 u262144
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1532537
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=088a1fe2-6f39-4eee-a7e2-6e0248754e43 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff8800071de000 - ffff88000b1de000
[ 0.000000] software IO TLB at phys 0x71de000 - 0xb1de000
[ 0.000000] Memory: 6066528k/7862272k available (3083k kernel code, 1624204k absent, 171540k reserved, 2048k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:472
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2195.138 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.27 BogoMIPS (lpj=8780552)
[ 0.000017] Security Framework initialized
[ 0.000021] SELinux: Disabled at boot.
[ 0.000580] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002359] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003104] Mount-cache hash table entries: 256
[ 0.003205] Initializing cgroup subsys ns
[ 0.003208] Initializing cgroup subsys cpuacct
[ 0.003212] Initializing cgroup subsys devices
[ 0.003213] Initializing cgroup subsys freezer
[ 0.003215] Initializing cgroup subsys net_cls
[ 0.003233] CPU: Physical Processor ID: 0
[ 0.003234] CPU: Processor Core ID: 0
[ 0.003238] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003239] CPU: L2 cache: 256K
[ 0.003240] CPU: L3 cache: 6144K
[ 0.003243] CPU 0/0x0 -> Node 0
[ 0.003246] mce: CPU supports 9 MCE banks
[ 0.003257] CPU0: Thermal monitoring handled by SMI
[ 0.003259] CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
[ 0.003269] using mwait in idle threads.
[ 0.003271] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.003275] ... version: 3
[ 0.003276] ... bit width: 48
[ 0.003277] ... generic registers: 4
[ 0.003278] ... value mask: 0000ffffffffffff
[ 0.003279] ... max period: 000000007fffffff
[ 0.003281] ... fixed-purpose events: 3
[ 0.003282] ... event mask: 000000070000000f
[ 0.004334] ACPI: Core revision 20090903
[ 0.030424] Not enabling x2apic, Intr-remapping init failed.
[ 0.030427] Setting APIC routing to flat
[ 0.030785] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070428] CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
[ 0.175844] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.186172] Initializing CPU#1
[ 0.263667] CPU: Physical Processor ID: 0
[ 0.263669] CPU: Processor Core ID: 0
[ 0.263672] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.263674] CPU: L2 cache: 256K
[ 0.263675] CPU: L3 cache: 6144K
[ 0.263678] CPU 1/0x1 -> Node 0
[ 0.263692] CPU1: Thermal monitoring handled by SMI
[ 0.263694] CPU 1 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8
[ 0.263716] CPU1: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
[ 0.263724] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.283775] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.294079] Initializing CPU#2
[ 0.371547] CPU: Physical Processor ID: 0
[ 0.371548] CPU: Processor Core ID: 1
[ 0.371550] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.371552] CPU: L2 cache: 256K
[ 0.371553] CPU: L3 cache: 6144K
[ 0.371555] CPU 2/0x2 -> Node 0
[ 0.371567] CPU2: Thermal monitoring handled by SMI
[ 0.371569] CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
[ 0.371626] CPU2: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
[ 0.371633] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.391679] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.401984] Initializing CPU#3
[ 0.479426] CPU: Physical Processor ID: 0
[ 0.479427] CPU: Processor Core ID: 1
[ 0.479430] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.479431] CPU: L2 cache: 256K
[ 0.479432] CPU: L3 cache: 6144K
[ 0.479434] CPU 3/0x3 -> Node 0
[ 0.479446] CPU3: Thermal monitoring handled by SMI
[ 0.479447] CPU 3 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8
[ 0.479530] CPU3: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
[ 0.479537] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.499587] Booting processor 4 APIC 0x4 ip 0x6000
[ 0.509893] Initializing CPU#4
[ 0.587307] CPU: Physical Processor ID: 0
[ 0.587308] CPU: Processor Core ID: 2
[ 0.587310] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.587312] CPU: L2 cache: 256K
[ 0.587313] CPU: L3 cache: 6144K
[ 0.587315] CPU 4/0x4 -> Node 0
[ 0.587327] CPU4: Thermal monitoring handled by SMI
[ 0.587329] CPU 4 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
[ 0.587345] CPU4: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
[ 0.587352] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.607399] Booting processor 5 APIC 0x5 ip 0x6000
[ 0.617703] Initializing CPU#5
[ 0.695187] CPU: Physical Processor ID: 0
[ 0.695187] CPU: Processor Core ID: 2
[ 0.695190] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.695192] CPU: L2 cache: 256K
[ 0.695193] CPU: L3 cache: 6144K
[ 0.695195] CPU 5/0x5 -> Node 0
[ 0.695206] CPU5: Thermal monitoring handled by SMI
[ 0.695208] CPU 5 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8
[ 0.695250] CPU5: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
[ 0.695257] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.715303] Booting processor 6 APIC 0x6 ip 0x6000
[ 0.725609] Initializing CPU#6
[ 0.803067] CPU: Physical Processor ID: 0
[ 0.803068] CPU: Processor Core ID: 3
[ 0.803071] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.803072] CPU: L2 cache: 256K
[ 0.803073] CPU: L3 cache: 6144K
[ 0.803076] CPU 6/0x6 -> Node 0
[ 0.803088] CPU6: Thermal monitoring handled by SMI
[ 0.803089] CPU 6 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
[ 0.803154] CPU6: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
[ 0.803161] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.823209] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.833515] Initializing CPU#7
[ 0.910947] CPU: Physical Processor ID: 0
[ 0.910948] CPU: Processor Core ID: 3
[ 0.910950] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.910951] CPU: L2 cache: 256K
[ 0.910952] CPU: L3 cache: 6144K
[ 0.910955] CPU 7/0x7 -> Node 0
[ 0.910966] CPU7: Thermal monitoring handled by SMI
[ 0.910968] CPU 7 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8
[ 0.911029] CPU7: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
[ 0.911036] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.931033] Brought up 8 CPUs
[ 0.931035] Total of 8 processors activated (35120.35 BogoMIPS).
[ 0.935835] CPU0 attaching sched-domain:
[ 0.935839] domain 0: span 0-1 level SIBLING
[ 0.935841] groups: group ffff88000700fae0 cpus 0 (cpu_power = 589) group ffff88000704fae0 cpus 1 (cpu_power = 589)
[ 0.935847] domain 1: span 0-7 level MC
[ 0.935848] groups: group ffff88000700fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000708fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000710fbf0 cpus 4-5 (cpu_power = 1178) group ffff88000718fbf0 cpus 6-7 (cpu_power = 1178)
[ 0.935859] CPU1 attaching sched-domain:
[ 0.935860] domain 0: span 0-1 level SIBLING
[ 0.935862] groups: group ffff88000704fae0 cpus 1 (cpu_power = 589) group ffff88000700fae0 cpus 0 (cpu_power = 589)
[ 0.935867] domain 1: span 0-7 level MC
[ 0.935868] groups: group ffff88000700fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000708fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000710fbf0 cpus 4-5 (cpu_power = 1178) group ffff88000718fbf0 cpus 6-7 (cpu_power = 1178)
[ 0.935877] CPU2 attaching sched-domain:
[ 0.935878] domain 0: span 2-3 level SIBLING
[ 0.935880] groups: group ffff88000708fae0 cpus 2 (cpu_power = 589) group ffff8800070cfae0 cpus 3 (cpu_power = 589)
[ 0.935885] domain 1: span 0-7 level MC
[ 0.935886] groups: group ffff88000708fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000710fbf0 cpus 4-5 (cpu_power = 1178) group ffff88000718fbf0 cpus 6-7 (cpu_power = 1178) group ffff88000700fbf0 cpus 0-1 (cpu_power = 1178)
[ 0.935895] CPU3 attaching sched-domain:
[ 0.935896] domain 0: span 2-3 level SIBLING
[ 0.935898] groups: group ffff8800070cfae0 cpus 3 (cpu_power = 589) group ffff88000708fae0 cpus 2 (cpu_power = 589)
[ 0.935903] domain 1: span 0-7 level MC
[ 0.935904] groups: group ffff88000708fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000710fbf0 cpus 4-5 (cpu_power = 1178) group ffff88000718fbf0 cpus 6-7 (cpu_power = 1178) group ffff88000700fbf0 cpus 0-1 (cpu_power = 1178)
[ 0.935913] CPU4 attaching sched-domain:
[ 0.935914] domain 0: span 4-5 level SIBLING
[ 0.935916] groups: group ffff88000710fae0 cpus 4 (cpu_power = 589) group ffff88000714fae0 cpus 5 (cpu_power = 589)
[ 0.935920] domain 1: span 0-7 level MC
[ 0.935922] groups: group ffff88000710fbf0 cpus 4-5 (cpu_power = 1178) group ffff88000718fbf0 cpus 6-7 (cpu_power = 1178) group ffff88000700fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000708fbf0 cpus 2-3 (cpu_power = 1178)
[ 0.935930] CPU5 attaching sched-domain:
[ 0.935932] domain 0: span 4-5 level SIBLING
[ 0.935933] groups: group ffff88000714fae0 cpus 5 (cpu_power = 589) group ffff88000710fae0 cpus 4 (cpu_power = 589)
[ 0.935938] domain 1: span 0-7 level MC
[ 0.935939] groups: group ffff88000710fbf0 cpus 4-5 (cpu_power = 1178) group ffff88000718fbf0 cpus 6-7 (cpu_power = 1178) group ffff88000700fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000708fbf0 cpus 2-3 (cpu_power = 1178)
[ 0.935948] CPU6 attaching sched-domain:
[ 0.935950] domain 0: span 6-7 level SIBLING
[ 0.935951] groups: group ffff88000718fae0 cpus 6 (cpu_power = 589) group ffff8800071cfae0 cpus 7 (cpu_power = 589)
[ 0.935956] domain 1: span 0-7 level MC
[ 0.935957] groups: group ffff88000718fbf0 cpus 6-7 (cpu_power = 1178) group ffff88000700fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000708fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000710fbf0 cpus 4-5 (cpu_power = 1178)
[ 0.935966] CPU7 attaching sched-domain:
[ 0.935967] domain 0: span 6-7 level SIBLING
[ 0.935969] groups: group ffff8800071cfae0 cpus 7 (cpu_power = 589) group ffff88000718fae0 cpus 6 (cpu_power = 589)
[ 0.935973] domain 1: span 0-7 level MC
[ 0.935975] groups: group ffff88000718fbf0 cpus 6-7 (cpu_power = 1178) group ffff88000700fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000708fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000710fbf0 cpus 4-5 (cpu_power = 1178)
[ 0.936286] devtmpfs: initialized
[ 0.939654] regulator: core version 0.5
[ 0.939692] NET: Registered protocol family 16
[ 0.939768] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.939771] ACPI: bus type pci registered
[ 0.939837] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.939839] PCI: MCFG area at e0000000 reserved in E820
[ 0.947194] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.947196] PCI: Using configuration type 1 for base access
[ 0.947678] bio: create slab <bio-0> at 0
[ 0.948696] ACPI: EC: Look up EC in DSDT
[ 0.949511] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.955131] ACPI: BIOS _OSI(Linux) query ignored
[ 0.959380] ACPI: Interpreter enabled
[ 0.959382] ACPI: (supports S0 S3 S4 S5)
[ 0.959409] ACPI: Using IOAPIC for interrupt routing
[ 0.971406] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.972151] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.972807] _OSC invalid UUID
[ 0.972809] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.972894] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.972897] pci 0000:00:01.0: PME# disabled
[ 0.972925] pci 0000:00:02.0: reg 10 64bit mmio: [0xc0000000-0xc03fffff]
[ 0.972930] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xb0000000-0xbfffffff]
[ 0.972934] pci 0000:00:02.0: reg 20 io port: [0x6000-0x603f]
[ 0.973006] pci 0000:00:16.0: reg 10 64bit mmio: [0xc7504000-0xc750400f]
[ 0.973052] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.973056] pci 0000:00:16.0: PME# disabled
[ 0.973112] pci 0000:00:1a.0: reg 10 32bit mmio: [0xc750a000-0xc750a3ff]
[ 0.973166] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.973170] pci 0000:00:1a.0: PME# disabled
[ 0.973211] pci 0000:00:1b.0: reg 10 64bit mmio: [0xc7500000-0xc7503fff]
[ 0.973252] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.973256] pci 0000:00:1b.0: PME# disabled
[ 0.973325] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.973329] pci 0000:00:1c.0: PME# disabled
[ 0.973402] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.973406] pci 0000:00:1c.1: PME# disabled
[ 0.973477] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.973481] pci 0000:00:1c.2: PME# disabled
[ 0.973551] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.973555] pci 0000:00:1c.3: PME# disabled
[ 0.973612] pci 0000:00:1d.0: reg 10 32bit mmio: [0xc7509000-0xc75093ff]
[ 0.973666] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.973670] pci 0000:00:1d.0: PME# disabled
[ 0.973809] pci 0000:00:1f.2: reg 10 io port: [0x6098-0x609f]
[ 0.973815] pci 0000:00:1f.2: reg 14 io port: [0x60bc-0x60bf]
[ 0.973821] pci 0000:00:1f.2: reg 18 io port: [0x6090-0x6097]
[ 0.973827] pci 0000:00:1f.2: reg 1c io port: [0x60b8-0x60bb]
[ 0.973833] pci 0000:00:1f.2: reg 20 io port: [0x6060-0x607f]
[ 0.973839] pci 0000:00:1f.2: reg 24 32bit mmio: [0xc7508000-0xc75087ff]
[ 0.973869] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.973873] pci 0000:00:1f.2: PME# disabled
[ 0.973903] pci 0000:00:1f.3: reg 10 64bit mmio: [0xc7506000-0xc75060ff]
[ 0.973917] pci 0000:00:1f.3: reg 20 io port: [0x6040-0x605f]
[ 0.973972] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xa0000000-0xafffffff]
[ 0.973982] pci 0000:01:00.0: reg 18 64bit mmio: [0xc6500000-0xc651ffff]
[ 0.973988] pci 0000:01:00.0: reg 20 io port: [0x5000-0x50ff]
[ 0.973998] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
[ 0.974020] pci 0000:01:00.0: supports D1 D2
[ 0.974051] pci 0000:00:01.0: bridge io port: [0x5000-0x5fff]
[ 0.974054] pci 0000:00:01.0: bridge 32bit mmio: [0xc6500000-0xc74fffff]
[ 0.974058] pci 0000:00:01.0: bridge 64bit mmio pref: [0xa0000000-0xafffffff]
[ 0.974114] pci 0000:07:00.0: reg 10 io port: [0x4000-0x40ff]
[ 0.974139] pci 0000:07:00.0: reg 18 64bit mmio pref: [0xc0404000-0xc0404fff]
[ 0.974156] pci 0000:07:00.0: reg 20 64bit mmio pref: [0xc0400000-0xc0403fff]
[ 0.974212] pci 0000:07:00.0: supports D1 D2
[ 0.974214] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.974219] pci 0000:07:00.0: PME# disabled
[ 0.974295] pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff]
[ 0.974299] pci 0000:00:1c.0: bridge 32bit mmio: [0xc5500000-0xc64fffff]
[ 0.974306] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xc0400000-0xc13fffff]
[ 0.974409] pci 0000:0d:00.0: reg 10 64bit mmio: [0xc4500000-0xc4503fff]
[ 0.974510] pci 0000:0d:00.0: supports D1 D2
[ 0.974600] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 0.974604] pci 0000:00:1c.1: bridge 32bit mmio: [0xc4500000-0xc54fffff]
[ 0.974610] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xc1400000-0xc23fffff]
[ 0.974670] pci 0000:13:00.0: reg 10 32bit mmio: [0xc3501000-0xc3501fff]
[ 0.974719] pci 0000:13:00.0: reg 30 32bit mmio pref: [0xffff0000-0xffffffff]
[ 0.974762] pci 0000:13:00.0: supports D1 D2
[ 0.974763] pci 0000:13:00.0: PME# supported from D1 D2 D3hot
[ 0.974769] pci 0000:13:00.0: PME# disabled
[ 0.974842] pci 0000:13:00.1: reg 10 32bit mmio: [0xc3500000-0xc35000ff]
[ 0.974935] pci 0000:13:00.1: supports D1 D2
[ 0.974937] pci 0000:13:00.1: PME# supported from D1 D2 D3hot
[ 0.974943] pci 0000:13:00.1: PME# disabled
[ 0.975036] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
[ 0.975040] pci 0000:00:1c.2: bridge 32bit mmio: [0xc3500000-0xc44fffff]
[ 0.975047] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xc2400000-0xc33fffff]
[ 0.975224] pci 0000:19:00.0: reg 10 64bit mmio: [0xc3400000-0xc3401fff]
[ 0.975372] pci 0000:19:00.0: PME# supported from D0 D3hot D3cold
[ 0.975385] pci 0000:19:00.0: PME# disabled
[ 0.975505] pci 0000:00:1c.3: bridge 32bit mmio: [0xc3400000-0xc34fffff]
[ 0.975538] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.975766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.975847] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.975926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.976005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.976115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.976299] _OSC invalid UUID
[ 0.983371] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.983523] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[ 0.983673] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 10 11 12 14 15)
[ 0.983820] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.983970] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.984118] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[ 0.984265] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.984413] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.984502] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.984510] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.984513] vgaarb: loaded
[ 0.984561] PCI: Using ACPI for IRQ routing
[ 0.984803] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.984809] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.987826] Switching to clocksource tsc
[ 0.988841] pnp: PnP ACPI init
[ 0.988848] ACPI: bus type pnp registered
[ 0.991834] alloc irq_desc for 23 on node 0
[ 0.991836] alloc kstat_irqs on node 0
[ 0.992010] pnp: PnP ACPI: found 13 devices
[ 0.992011] ACPI: ACPI bus type pnp unregistered
[ 0.992020] system 00:05: ioport range 0x680-0x69f has been reserved
[ 0.992022] system 00:05: ioport range 0x1000-0x100f has been reserved
[ 0.992024] system 00:05: ioport range 0x1010-0x1013 has been reserved
[ 0.992027] system 00:05: ioport range 0xffff-0xffff has been reserved
[ 0.992029] system 00:05: ioport range 0x400-0x453 has been reserved
[ 0.992031] system 00:05: ioport range 0x458-0x47f has been reserved
[ 0.992033] system 00:05: ioport range 0x500-0x57f has been reserved
[ 0.992035] system 00:05: ioport range 0x164e-0x164f has been reserved
[ 0.992040] system 00:07: ioport range 0x454-0x457 has been reserved
[ 0.992045] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.992047] system 00:0a: iomem range 0xfed10000-0xfed17fff has been reserved
[ 0.992049] system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.992052] system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.992058] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.992060] system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.992062] system 00:0a: iomem range 0xfed90000-0xfed93fff has been reserved
[ 0.992065] system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved
[ 0.992067] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.992070] system 00:0a: iomem range 0x9fa00000-0x9fa00fff could not be reserved
[ 0.992074] system 00:0c: iomem range 0x20000000-0x201fffff could not be reserved
[ 0.992076] system 00:0c: iomem range 0x40000000-0x401fffff could not be reserved
[ 0.996762] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[ 0.996822] pci 0000:13:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff]
[ 0.996913] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.996915] pci 0000:00:01.0: IO window: 0x5000-0x5fff
[ 0.996918] pci 0000:00:01.0: MEM window: 0xc6500000-0xc74fffff
[ 0.996921] pci 0000:00:01.0: PREFETCH window: 0x000000a0000000-0x000000afffffff
[ 0.996925] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:07
[ 0.996928] pci 0000:00:1c.0: IO window: 0x4000-0x4fff
[ 0.996933] pci 0000:00:1c.0: MEM window: 0xc5500000-0xc64fffff
[ 0.996937] pci 0000:00:1c.0: PREFETCH window: 0x000000c0400000-0x000000c13fffff
[ 0.996944] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0d
[ 0.996947] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.996953] pci 0000:00:1c.1: MEM window: 0xc4500000-0xc54fffff
[ 0.996957] pci 0000:00:1c.1: PREFETCH window: 0x000000c1400000-0x000000c23fffff
[ 0.996964] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:13
[ 0.996967] pci 0000:00:1c.2: IO window: 0x2000-0x2fff
[ 0.996973] pci 0000:00:1c.2: MEM window: 0xc3500000-0xc44fffff
[ 0.996977] pci 0000:00:1c.2: PREFETCH window: 0x000000c2400000-0x000000c33fffff
[ 0.996984] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:19
[ 0.996985] pci 0000:00:1c.3: IO window: disabled
[ 0.996990] pci 0000:00:1c.3: MEM window: 0xc3400000-0xc34fffff
[ 0.996994] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.997005] alloc irq_desc for 16 on node -1
[ 0.997006] alloc kstat_irqs on node -1
[ 0.997011] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.997014] pci 0000:00:01.0: setting latency timer to 64
[ 0.997021] alloc irq_desc for 17 on node -1
[ 0.997022] alloc kstat_irqs on node -1
[ 0.997025] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.997030] pci 0000:00:1c.0: setting latency timer to 64
[ 0.997039] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.997043] pci 0000:00:1c.1: setting latency timer to 64
[ 0.997051] alloc irq_desc for 18 on node -1
[ 0.997053] alloc kstat_irqs on node -1
[ 0.997055] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.997060] pci 0000:00:1c.2: setting latency timer to 64
[ 0.997068] alloc irq_desc for 19 on node -1
[ 0.997069] alloc kstat_irqs on node -1
[ 0.997072] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.997077] pci 0000:00:1c.3: setting latency timer to 64
[ 0.997081] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.997083] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.997085] pci_bus 0000:01: resource 0 io: [0x5000-0x5fff]
[ 0.997087] pci_bus 0000:01: resource 1 mem: [0xc6500000-0xc74fffff]
[ 0.997089] pci_bus 0000:01: resource 2 pref mem [0xa0000000-0xafffffff]
[ 0.997091] pci_bus 0000:07: resource 0 io: [0x4000-0x4fff]
[ 0.997092] pci_bus 0000:07: resource 1 mem: [0xc5500000-0xc64fffff]
[ 0.997094] pci_bus 0000:07: resource 2 pref mem [0xc0400000-0xc13fffff]
[ 0.997096] pci_bus 0000:0d: resource 0 io: [0x3000-0x3fff]
[ 0.997098] pci_bus 0000:0d: resource 1 mem: [0xc4500000-0xc54fffff]
[ 0.997100] pci_bus 0000:0d: resource 2 pref mem [0xc1400000-0xc23fffff]
[ 0.997102] pci_bus 0000:13: resource 0 io: [0x2000-0x2fff]
[ 0.997103] pci_bus 0000:13: resource 1 mem: [0xc3500000-0xc44fffff]
[ 0.997105] pci_bus 0000:13: resource 2 pref mem [0xc2400000-0xc33fffff]
[ 0.997107] pci_bus 0000:19: resource 1 mem: [0xc3400000-0xc34fffff]
[ 0.997128] NET: Registered protocol family 2
[ 0.997324] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.998185] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.999461] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.999593] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.999595] TCP reno registered
[ 0.999673] NET: Registered protocol family 1
[ 0.999688] pci 0000:00:02.0: Boot video device
[ 1.043177] Unpacking initramfs...
[ 1.231629] Freeing initrd memory: 9094k freed
[ 1.232776] Simple Boot Flag at 0x44 set to 0x1
[ 1.233303] audit: initializing netlink socket (disabled)
[ 1.233310] type=2000 audit(1330863459.006:1): initialized
[ 1.236402] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.237548] VFS: Disk quotas dquot_6.5.2
[ 1.237589] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.237653] msgmni has been set to 11866
[ 1.237862] alg: No test for stdrng (krng)
[ 1.237898] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.237901] io scheduler noop registered
[ 1.237902] io scheduler anticipatory registered
[ 1.237904] io scheduler deadline registered
[ 1.237951] io scheduler cfq registered (default)
[ 1.238032] alloc irq_desc for 24 on node -1
[ 1.238033] alloc kstat_irqs on node -1
[ 1.238040] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 1.238045] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.238132] alloc irq_desc for 25 on node -1
[ 1.238133] alloc kstat_irqs on node -1
[ 1.238142] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 1.238150] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.238255] alloc irq_desc for 26 on node -1
[ 1.238256] alloc kstat_irqs on node -1
[ 1.238263] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 1.238272] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.238377] alloc irq_desc for 27 on node -1
[ 1.238378] alloc kstat_irqs on node -1
[ 1.238385] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 1.238394] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.238500] alloc irq_desc for 28 on node -1
[ 1.238501] alloc kstat_irqs on node -1
[ 1.238508] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
[ 1.238516] pcieport 0000:00:1c.3: setting latency timer to 64
[ 1.239677] Linux agpgart interface v0.103
[ 1.239705] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.240007] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.240050] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.247480] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.247484] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.247547] mice: PS/2 mouse device common for all mice
[ 1.247576] rtc_cmos 00:06: RTC can wake from S4
[ 1.247602] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.247631] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.247639] cpuidle: using governor ladder
[ 1.247641] cpuidle: using governor menu
[ 1.247644] No iBFT detected.
[ 1.247874] TCP cubic registered
[ 1.247962] NET: Registered protocol family 10
[ 1.248497] Mobile IPv6
[ 1.248499] NET: Registered protocol family 17
[ 1.248554] PM: Resume from disk failed.
[ 1.248560] registered taskstats version 1
[ 1.249113] rtc_cmos 00:06: setting system clock to 2012-03-04 12:17:39 UTC (1330863459)
[ 1.249163] Initalizing network drop monitor service
[ 1.249186] Freeing unused kernel memory: 592k freed
[ 1.249269] Write protecting the kernel read-only data: 4240k
[ 1.251355] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.260393] udev[116]: starting version 164
[ 1.292613] usbcore: registered new interface driver usbfs
[ 1.292637] usbcore: registered new interface driver hub
[ 1.292715] usbcore: registered new device driver usb
[ 1.294341] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.294368] r8169 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.294442] r8169 0000:07:00.0: setting latency timer to 64
[ 1.294452] r8169 0000:07:00.0: (unregistered net_device): unknown MAC, using family default
[ 1.294547] alloc irq_desc for 29 on node -1
[ 1.294550] alloc kstat_irqs on node -1
[ 1.294569] r8169 0000:07:00.0: irq 29 for MSI/MSI-X
[ 1.295238] r8169 0000:07:00.0: eth0: RTL8168b/8111b at 0xffffc900117f8000, 2c:41:38:61:15:bb, XID 0c900800 IRQ 29
[ 1.297023] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.297043] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.297064] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.297068] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.297085] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.297118] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.301013] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 1.301028] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc750a000
[ 1.301144] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.301152] ACPI: Thermal Zone [THRM] (59 C)
[ 1.311106] SCSI subsystem initialized
[ 1.312001] sdhci: Secure Digital Host Controller Interface driver
[ 1.312003] sdhci: Copyright(c) Pierre Ossman
[ 1.312831] xhci_hcd 0000:19:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.312860] xhci_hcd 0000:19:00.0: setting latency timer to 64
[ 1.312867] xhci_hcd 0000:19:00.0: xHCI Host Controller
[ 1.312880] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 2
[ 1.313070] xhci_hcd 0000:19:00.0: irq 19, io mem 0xc3400000
[ 1.316471] usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[ 1.316481] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.316484] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.316487] usb usb2: Product: xHCI Host Controller
[ 1.316490] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
[ 1.316492] usb usb2: SerialNumber: 0000:19:00.0
[ 1.316574] usb usb2: configuration #1 chosen from 1 choice
[ 1.316578] xHCI xhci_add_endpoint called for root hub
[ 1.316580] xHCI xhci_check_bandwidth called for root hub
[ 1.316597] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.316618] hub 2-0:1.0: USB hub found
[ 1.316624] hub 2-0:1.0: 4 ports detected
[ 1.316706] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.316708] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.316709] usb usb1: Product: EHCI Host Controller
[ 1.316711] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.316712] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.316768] usb usb1: configuration #1 chosen from 1 choice
[ 1.316792] hub 1-0:1.0: USB hub found
[ 1.316799] hub 1-0:1.0: 2 ports detected
[ 1.316841] alloc irq_desc for 20 on node -1
[ 1.316844] alloc kstat_irqs on node -1
[ 1.316850] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.316863] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.316867] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.316873] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.316900] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.320767] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 1.320780] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc7509000
[ 1.330459] libata version 3.00 loaded.
[ 1.331095] sdhci-pci 0000:13:00.1: SDHCI controller found [10ec:5209] (rev 1)
[ 1.331114] sdhci-pci 0000:13:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.331140] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.331147] sdhci-pci 0000:13:00.1: setting latency timer to 64
[ 1.331173] Registered led device: mmc0::
[ 1.331200] mmc0: SDHCI controller on PCI [0000:13:00.1] using DMA
[ 1.336590] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.336629] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.336635] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.336640] usb usb3: Product: EHCI Host Controller
[ 1.336644] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.336648] usb usb3: SerialNumber: 0000:00:1d.0
[ 1.336720] usb usb3: configuration #1 chosen from 1 choice
[ 1.336742] hub 3-0:1.0: USB hub found
[ 1.336746] hub 3-0:1.0: 2 ports detected
[ 1.336785] ahci 0000:00:1f.2: version 3.0
[ 1.336802] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.336846] alloc irq_desc for 30 on node -1
[ 1.336849] alloc kstat_irqs on node -1
[ 1.336861] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
[ 1.351608] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
[ 1.351618] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.351628] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.359654] scsi0 : ahci
[ 1.359738] scsi1 : ahci
[ 1.359804] scsi2 : ahci
[ 1.359869] scsi3 : ahci
[ 1.359932] scsi4 : ahci
[ 1.359995] scsi5 : ahci
[ 1.360112] ata1: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508100 irq 30
[ 1.360114] ata2: DUMMY
[ 1.360115] ata3: DUMMY
[ 1.360116] ata4: DUMMY
[ 1.360117] ata5: DUMMY
[ 1.360120] ata6: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508380 irq 30
[ 1.628536] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.683984] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.691971] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.696410] ata6.00: ACPI _SDD failed (AE 0x5)
[ 1.697014] ata1.00: ATA-8: WDC WD6400BPVT-60HXZT3, 01.01A01, max UDMA/133
[ 1.697020] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.702319] ata1.00: configured for UDMA/133
[ 1.715332] scsi 0:0:0:0: Direct-Access ATA WDC WD6400BPVT-6 01.0 PQ: 0 ANSI: 5
[ 1.759457] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.759463] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.759569] usb 1-1: configuration #1 chosen from 1 choice
[ 1.759734] hub 1-1:1.0: USB hub found
[ 1.759819] hub 1-1:1.0: 6 ports detected
[ 1.871036] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 2.007307] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.007313] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.007413] usb 3-1: configuration #1 chosen from 1 choice
[ 2.007584] hub 3-1:1.0: USB hub found
[ 2.007670] hub 3-1:1.0: 6 ports detected
[ 2.082977] usb 1-1.1: new full speed USB device using ehci_hcd and address 3
[ 2.172002] usb 1-1.1: New USB device found, idVendor=138a, idProduct=0018
[ 2.172008] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 2.172013] usb 1-1.1: SerialNumber: e43f9c040b29
[ 2.172109] usb 1-1.1: configuration #1 chosen from 1 choice
[ 2.246807] usb 1-1.2: new high speed USB device using ehci_hcd and address 4
[ 2.372403] usb 1-1.2: New USB device found, idVendor=04f2, idProduct=b252
[ 2.372409] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.372414] usb 1-1.2: Product: HP TrueVision HD
[ 2.372418] usb 1-1.2: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.372422] usb 1-1.2: SerialNumber: SN0001
[ 2.372517] usb 1-1.2: configuration #1 chosen from 1 choice
[ 2.450583] usb 3-1.2: new low speed USB device using ehci_hcd and address 3
[ 2.552830] usb 3-1.2: New USB device found, idVendor=0458, idProduct=003a
[ 2.552836] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.552841] usb 3-1.2: Manufacturer: Genius
[ 2.552940] usb 3-1.2: configuration #1 chosen from 1 choice
[ 2.626381] usb 3-1.5: new full speed USB device using ehci_hcd and address 4
[ 2.717895] usb 3-1.5: New USB device found, idVendor=0a5c, idProduct=21b4
[ 2.717901] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.717906] usb 3-1.5: Product: Broadcom 2070 Bluetooth
[ 2.717911] usb 3-1.5: Manufacturer: Broadcom Corp
[ 2.717914] usb 3-1.5: SerialNumber: 402CF4237087
[ 2.718010] usb 3-1.5: configuration #1 chosen from 1 choice
[ 7.001693] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.014108] ata6.00: ACPI _SDD failed (AE 0x5)
[ 7.014113] ata6.00: ACPI: failed the second time, disabled
[ 7.014120] ata6.00: ATAPI: hp DVD-RAM UJ8B1, H.03, max UDMA/100
[ 7.026823] ata6.00: configured for UDMA/100
[ 7.045303] scsi 5:0:0:0: CD-ROM hp DVD-RAM UJ8B1 H.03 PQ: 0 ANSI: 5
[ 7.047789] usbcore: registered new interface driver hiddev
[ 7.050080] input: Genius as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input2
[ 7.050153] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius] on usb-0000:00:1d.0-1.2/input0
[ 7.050177] usbcore: registered new interface driver usbhid
[ 7.050180] usbhid: v2.6:USB HID core driver
[ 7.051300] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 7.051302] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 7.051336] sd 0:0:0:0: [sda] Write Protect is off
[ 7.051338] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.051352] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.051466] sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.060762] Uniform CD-ROM driver Revision: 3.20
[ 7.060895] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 7.085804] sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[ 7.148770] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.151860] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.151895] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 7.762538] PM: Starting manual resume from disk
[ 7.762541] PM: Resume from partition 8:8
[ 7.762542] PM: Checking hibernation image.
[ 7.776977] PM: Error -22 checking image file
[ 7.776981] PM: Resume from disk failed.
[ 7.822289] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 9.346813] udev[462]: starting version 164
[ 10.050888] ACPI: SSDT 000000009ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 10.051055] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3
[ 10.054226] ACPI: Lid Switch [LID]
[ 10.057422] Monitor-Mwait will be used to enter C-1 state
[ 10.057442] Monitor-Mwait will be used to enter C-2 state
[ 10.057462] Monitor-Mwait will be used to enter C-3 state
[ 10.057553] processor LNXCPU:00: registered as cooling_device0
[ 10.058230] ACPI: SSDT 000000009ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 10.058815] ACPI: SSDT 000000009ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 10.061746] processor LNXCPU:01: registered as cooling_device1
[ 10.066222] processor LNXCPU:02: registered as cooling_device2
[ 10.069872] processor LNXCPU:03: registered as cooling_device3
[ 10.073281] processor LNXCPU:04: registered as cooling_device4
[ 10.076793] processor LNXCPU:05: registered as cooling_device5
[ 10.078243] processor LNXCPU:06: registered as cooling_device6
[ 10.081448] processor LNXCPU:07: registered as cooling_device7
[ 10.087657] ACPI: Battery Slot [BAT0] (battery present)
[ 10.087726] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 10.087768] ACPI: Power Button [PWRB]
[ 10.087830] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 10.087834] ACPI: WMI: Mapper loaded
[ 10.087860] ACPI: Power Button [PWRF]
[ 10.147725] ACPI: AC Adapter [AC] (on-line)
[ 10.326785] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 10.373685] cfg80211: Using static regulatory domain info
[ 10.373688] cfg80211: Regulatory domain: US
[ 10.373690] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.373693] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 10.373696] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.373699] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.373702] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.373705] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.373708] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 10.373715] cfg80211: Calling CRDA for country: US
[ 10.429740] Unable to query Synaptics hardware.
[ 10.435136] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 10.435143] ACPI: I/O resource 0000:00:1f.3 [0x6040-0x605f] conflicts with ACPI region SMBI [0x6040-0x604f]
[ 10.435204] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.730114] brcm80211: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.733744] brcm80211 0000:0d:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.733754] brcm80211 0000:0d:00.0: setting latency timer to 64
[ 10.733853] brcm80211 0000:0d:00.0: firmware: requesting brcm/bcm43xx-0.fw
[ 10.742879] Bluetooth: Core ver 2.15
[ 10.742967] NET: Registered protocol family 31
[ 10.742970] Bluetooth: HCI device and connection manager initialized
[ 10.742973] Bluetooth: HCI socket layer initialized
[ 10.744075] lis3lv02d: laptop model unknown, using default axes configuration
[ 10.847369] Linux video capture interface: v2.00
[ 10.893887] uvcvideo: Found UVC 1.00 device HP TrueVision HD (04f2:b252)
[ 10.920820] brcm80211: fail to load firmware brcm/bcm43xx-0.fw
[ 10.920824] brcm80211: Failed to find firmware usually in /lib/firmware/brcm
[ 10.920864] brcm80211 0000:0d:00.0: PCI INT A disabled
[ 10.920875] brcm80211: wl_pci_probe: wl_attach failed!
[ 10.940813] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.940930] usbcore: registered new interface driver btusb
[ 11.088149] lis3lv02d: unknown sensor type 0x33
[ 11.088204] lis3lv02d: probe of HPQ0004:00 failed with error -22
[ 11.088222] lis3lv02d driver loaded.
[ 11.109643] input: HP TrueVision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input7
[ 11.109705] usbcore: registered new interface driver uvcvideo
[ 11.109709] USB Video Class driver (v0.1.0)
[ 11.259155] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 11.422285] alloc irq_desc for 22 on node -1
[ 11.422288] alloc kstat_irqs on node -1
[ 11.422297] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 11.422381] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.233692] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 12.244640] input: HDA Intel PCH Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.244717] input: HDA Intel PCH HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 13.006622] Adding 4193272k swap on /dev/sda8. Priority:-1 extents:1 across:4193272k
[ 13.262077] loop: module loaded
[ 14.975850] fuse init (API version 7.13)
[ 16.214593] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 16.964110] r8169 0000:07:00.0: eth0: link down
[ 16.964725] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.808505] [drm] Initialized drm 1.1.0 20060810
[ 20.203809] Bluetooth: L2CAP ver 2.14
[ 20.203812] Bluetooth: L2CAP socket layer initialized
[ 20.248744] Bluetooth: RFCOMM TTY layer initialized
[ 20.248749] Bluetooth: RFCOMM socket layer initialized
[ 20.248751] Bluetooth: RFCOMM ver 1.11
[ 20.433358] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.433361] Bluetooth: BNEP filters: protocol multicast
[ 20.483814] Bridge firewalling registered
[ 20.827430] Bluetooth: SCO (Voice Link) ver 0.6
[ 20.827438] Bluetooth: SCO socket layer initialized
[ 20.921834] lp: driver loaded but no devices found
[ 21.116047] ppdev: user-space parallel port driver
[ 28.407304] CPU0 attaching NULL sched-domain.
[ 28.407307] CPU1 attaching NULL sched-domain.
[ 28.407308] CPU2 attaching NULL sched-domain.
[ 28.407310] CPU3 attaching NULL sched-domain.
[ 28.407311] CPU4 attaching NULL sched-domain.
[ 28.407312] CPU5 attaching NULL sched-domain.
[ 28.407313] CPU6 attaching NULL sched-domain.
[ 28.407315] CPU7 attaching NULL sched-domain.
[ 28.464833] CPU0 attaching sched-domain:
[ 28.464842] domain 0: span 0-1 level SIBLING
[ 28.464848] groups: group ffff88000700fae0 cpus 0 (cpu_power = 589) group ffff88000704fae0 cpus 1 (cpu_power = 589)
[ 28.464866] domain 1: span 0-7 level MC
[ 28.464871] groups: group ffff88000700fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000708fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000710fbf0 cpus 4-5 (cpu_power = 1178) group ffff88000718fbf0 cpus 6-7 (cpu_power = 1178)
[ 28.464898] CPU1 attaching sched-domain:
[ 28.464902] domain 0: span 0-1 level SIBLING
[ 28.464906] groups: group ffff88000704fae0 cpus 1 (cpu_power = 589) group ffff88000700fae0 cpus 0 (cpu_power = 589)
[ 28.464920] domain 1: span 0-7 level MC
[ 28.464924] groups: group ffff88000700fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000708fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000710fbf0 cpus 4-5 (cpu_power = 1178) group ffff88000718fbf0 cpus 6-7 (cpu_power = 1178)
[ 28.464948] CPU2 attaching sched-domain:
[ 28.464952] domain 0: span 2-3 level SIBLING
[ 28.464956] groups: group ffff88000708fae0 cpus 2 (cpu_power = 589) group ffff8800070cfae0 cpus 3 (cpu_power = 589)
[ 28.464969] domain 1: span 0-7 level MC
[ 28.464973] groups: group ffff88000708fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000710fbf0 cpus 4-5 (cpu_power = 1178) group ffff88000718fbf0 cpus 6-7 (cpu_power = 1178) group ffff88000700fbf0 cpus 0-1 (cpu_power = 1178)
[ 28.464997] CPU3 attaching sched-domain:
[ 28.465001] domain 0: span 2-3 level SIBLING
[ 28.465005] groups: group ffff8800070cfae0 cpus 3 (cpu_power = 589) group ffff88000708fae0 cpus 2 (cpu_power = 589)
[ 28.465018] domain 1: span 0-7 level MC
[ 28.465022] groups: group ffff88000708fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000710fbf0 cpus 4-5 (cpu_power = 1178) group ffff88000718fbf0 cpus 6-7 (cpu_power = 1178) group ffff88000700fbf0 cpus 0-1 (cpu_power = 1178)
[ 28.465046] CPU4 attaching sched-domain:
[ 28.465050] domain 0: span 4-5 level SIBLING
[ 28.465054] groups: group ffff88000710fae0 cpus 4 (cpu_power = 589) group ffff88000714fae0 cpus 5 (cpu_power = 589)
[ 28.465067] domain 1: span 0-7 level MC
[ 28.465071] groups: group ffff88000710fbf0 cpus 4-5 (cpu_power = 1178) group ffff88000718fbf0 cpus 6-7 (cpu_power = 1178) group ffff88000700fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000708fbf0 cpus 2-3 (cpu_power = 1178)
[ 28.465097] CPU5 attaching sched-domain:
[ 28.465101] domain 0: span 4-5 level SIBLING
[ 28.465105] groups: group ffff88000714fae0 cpus 5 (cpu_power = 589) group ffff88000710fae0 cpus 4 (cpu_power = 589)
[ 28.465118] domain 1: span 0-7 level MC
[ 28.465122] groups: group ffff88000710fbf0 cpus 4-5 (cpu_power = 1178) group ffff88000718fbf0 cpus 6-7 (cpu_power = 1178) group ffff88000700fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000708fbf0 cpus 2-3 (cpu_power = 1178)
[ 28.465146] CPU6 attaching sched-domain:
[ 28.465150] domain 0: span 6-7 level SIBLING
[ 28.465154] groups: group ffff88000718fae0 cpus 6 (cpu_power = 589) group ffff8800071cfae0 cpus 7 (cpu_power = 589)
[ 28.465167] domain 1: span 0-7 level MC
[ 28.465171] groups: group ffff88000718fbf0 cpus 6-7 (cpu_power = 1178) group ffff88000700fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000708fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000710fbf0 cpus 4-5 (cpu_power = 1178)
[ 28.465196] CPU7 attaching sched-domain:
[ 28.465200] domain 0: span 6-7 level SIBLING
[ 28.465204] groups: group ffff8800071cfae0 cpus 7 (cpu_power = 589) group ffff88000718fae0 cpus 6 (cpu_power = 589)
[ 28.465217] domain 1: span 0-7 level MC
[ 28.465222] groups: group ffff88000718fbf0 cpus 6-7 (cpu_power = 1178) group ffff88000700fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000708fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000710fbf0 cpus 4-5 (cpu_power = 1178)
[ 49.912357] usb 3-1.5: USB disconnect, address 4
[ 49.912463] btusb_bulk_complete: hci0 urb ffff8801ddb71840 failed to resubmit (19)
[ 49.912521] btusb_intr_complete: hci0 urb ffff8801ddb71240 failed to resubmit (19)
[ 49.912589] btusb_bulk_complete: hci0 urb ffff8801ddb71540 failed to resubmit (19)
[ 49.912634] btusb_send_frame: hci0 urb ffff8801dcb98600 submission failed
[ 51.643361] usb 3-1.5: new full speed USB device using ehci_hcd and address 5
[ 51.739840] usb 3-1.5: New USB device found, idVendor=0a5c, idProduct=21b4
[ 51.739849] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 51.739855] usb 3-1.5: Product: Broadcom 2070 Bluetooth
[ 51.739859] usb 3-1.5: Manufacturer: Broadcom Corp
[ 51.739863] usb 3-1.5: SerialNumber: 402CF4237087
[ 51.740064] usb 3-1.5: configuration #1 chosen from 1 choice
[/console]
Показать

[console]
root@s3dworld:/home/sergei# lspci -k
00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09)
Subsystem: Hewlett-Packard Company Device 3388
00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09)
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09)
Subsystem: Hewlett-Packard Company Device 3388
00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
Subsystem: Hewlett-Packard Company Device 3388
00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05)
Subsystem: Hewlett-Packard Company Device 3388
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05)
Subsystem: Hewlett-Packard Company Device 3388
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 3 (rev b5)
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b5)
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05)
Subsystem: Hewlett-Packard Company Device 3388
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 05)
Subsystem: Hewlett-Packard Company Device 3388
00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05)
Subsystem: Hewlett-Packard Company Device 3388
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05)
Subsystem: Hewlett-Packard Company Device 3388
01:00.0 VGA compatible controller: ATI Technologies Inc Device 6740
Subsystem: Hewlett-Packard Company Device 3388
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: Hewlett-Packard Company Device 3388
Kernel driver in use: r8169
0d:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
Subsystem: Hewlett-Packard Company Device 1483
13:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01)
Subsystem: Hewlett-Packard Company Device 3388
13:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01)
Subsystem: Hewlett-Packard Company Device 3388
Kernel driver in use: sdhci-pci
19:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
Subsystem: Hewlett-Packard Company Device 1658
Kernel driver in use: xhci_hcd
[/console]

[console]
root@s3dworld:/home/sergei# cat /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.

# PCI device 0x10ec:0x8168 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="2c:41:38:61:15:bb", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
root@s3dworld:/home/sergei#
[/console]

#234670

Просмотрите темы — http://linuxforum.ru/search.php?search_id=317514150 — на форуме решение проблем с вашей карточкой уже обсуждалось. Если не получится самостоятельно найти решение, чуть позже подключусь к поиску.

#234672

s3dworld,
[console]ifconfig wlan0 up
iwlist scan[/console]
не?

#234673

Dimaty

не?

Так он у меня не видит wlan0.

#234674
Dimaty написал:

[console]ifconfig wlan0 up
iwlist scan[/console]
s3dworld написал:
Однако, как пишут в большинства статей, ни одно устройство не называется wlan0 (да и в описаниях устройств нет ничего такого бы, чтобы говорило что оно Wi-Fi).
s3dworld написал:
Следом решил просканировать каждое:

[console]iwlist NAME scan[/console]

И на каждое устройство он мне вывел что оно не предназначено для сканирования.
#234680

Не, ничего не нашёл чтобы помогло.

#234681

А в networkmanager показывает Беспроводной сетевой интерфейс?

#234682
Lupo Alberto написал:
Просмотрите темы — http://linuxforum.ru/search.php?search_id=317514150 — на форуме решение проблем с вашей карточкой уже обсуждалось. Если не получится самостоятельно найти решение, чуть позже подключусь к поиску.

Уже писалось много раз что такой поиск только тому виден кто привел, через гугл приводить надо.

#234683
}{0ТТ@БЬ)Ч написал:
Уже писалось много раз что такой поиск только тому виден кто привел, через гугл приводить надо.

http://www.google.by/search?q=Broadcom+Corporation+BCM4313+site%3Alinuxforum.ru&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:ru:official&client=firefox#hl=ru&client=firefox&hs=oN8&rls=org.mozilla:ru:official&sa=X&ei=my5TT-LoDaaj4gTKkuzWDQ&ved=0CBkQBSgA&q=Broadcom+Corporation+BCM+4313+site%3Alinuxforum.ru&spell=1&bav=on.2,or.r_gc.r_pw.r_qf.,cf.osb&fp=c78ebae42abde05f&biw=1276&bih=654

#234684

}{0ТТ@БЬ)Ч
Такое ощущение, что у меня в системе нет Wi-Fi. Пишет что нет устройство для сканирования. Ставил ещё графическую утилитку , название не помню, она ищет точки доступа, так вот, ничего не нашла (хотя в квартире стоит маршрутизатор и из под Windows 7 всё нормально работает).

#234686
text
[   10.920820] brcm80211: fail to load firmware brcm/bcm43xx-0.fw

Нужно бы пакет с firmware установить.

#234688

Имя пакета должно быть примерно такое — firmware-brcm80211

#234690

s3dworld, покажи еще [console]lspci -v[/console]

#234694

Lupo Alberto
У меня в сумантеке только какой-то firmware-free-linux. Я его поставил, но ничего не изменилось для меня.

Войдите или зарегистрируйтесь, чтобы ответить.