Как убрать мусор udevd

06.02.2012 09:29 · отредактировано #227197

У меня в Debian squeeze 6.0.3 после перезагрузки появляется много строк типа: udevd .. в квадратных скобках числовые значения.... bar6 ...это будет удалено в следующем релизе . Оно конечно работе не мешает но раздражает

06.02.2012 09:45 #227199

Править init скрипты - больше вроде никак, не знаю что там тебя раздражает, это следствие к примеру отказ от /opt или переход на /run вместо /var/run.
кстати в sid этого нет, уже другие init скрипты.

06.02.2012 10:21 · отредактировано #227206

newzenon написал:
Править init скрипты - больше вроде никак, не знаю что там тебя раздражает, это следствие к примеру отказ от /opt или переход на /run вместо /var/run.
кстати в sid этого нет, уже другие init скрипты.

Да раздражает экран заполненный этими строками перед загрузкой и я никакого отказа не делал и никуда не переходил. Изначально этими строками сыпало как из рога изоблилия
Что править?

Показать

Файл: inittab Строка 1 Позиция 0 2008 байт 50%
# /etc/inittab: init(8) configuration.
# $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $

# The default runlevel.
id:2:initdefault:

# Boot-time system configuration/initialization script.
# This is run first except when booting in emergency (-b) mode.
si::sysinit:/etc/init.d/rcS

# What to do in single-user mode.
~~:S:wait:/sbin/sulogin

# /etc/init.d executes the S and K scripts upon change
# of runlevel.
#
# Runlevel 0 is halt.
# Runlevel 1 is single-user.
# Runlevels 2-5 are multi-user.
# Runlevel 6 is reboot.

l0:0:wait:/etc/init.d/rc 0
l1:1:wait:/etc/init.d/rc 1
l2:2:wait:/etc/init.d/rc 2
l3:3:wait:/etc/init.d/rc 3
l4:4:wait:/etc/init.d/rc 4
l5:5:wait:/etc/init.d/rc 5
l6:6:wait:/etc/init.d/rc 6
# Normally not reached, but fallthrough in case of emergency.
z6:6:respawn:/sbin/sulogin

# What to do when CTRL-ALT-DEL is pressed.
ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now

# Action on special keypress (ALT-UpArrow).
#kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work."
Файл: inittab Строка 35 Позиция 02008 байт 100%
# Action on special keypress (ALT-UpArrow).
#kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work."

# What to do when the power fails/returns.
pf::powerwait:/etc/init.d/powerfail start
pn::powerfailnow:/etc/init.d/powerfail now
po::powerokwait:/etc/init.d/powerfail stop

# /sbin/getty invocations for the runlevels.
#
# The "id" field MUST be the same as the last
# characters of the device (after "tty").
#
# Format:
# <id>:<runlevels>:<action>:<process>
#
# Note that on most Debian systems tty7 is used by the X Window System,
# so if you want to add more getty's go ahead but skip tty7 if you run X.
#
1:2345:respawn:/sbin/getty 38400 tty1
2:23:respawn:/sbin/getty 38400 tty2
3:23:respawn:/sbin/getty 38400 tty3
4:23:respawn:/sbin/getty 38400 tty4
5:23:respawn:/sbin/getty 38400 tty5
6:23:respawn:/sbin/getty 38400 tty6

# Example how to put a getty on a serial line (for a terminal)
#
#T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100
#T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100

# Example how to put a getty on a modem line.
#
#T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3

06.02.2012 10:51 #227216

pavlar, я не про inittab, я про init скрипты.
Покажи log загрузки.
ы. вместо спойлера лучше теги code /code используй.

06.02.2012 11:14 · отредактировано #227230

newzenon написал:
pavlar, я не про inittab, я про init скрипты.
Покажи log загрузки.
ы. вместо спойлера лучше теги code /code используй.

Показать

GNU nano 2.2.4 Файл: /var/log/messages

Feb 6 07:22:42 debian kernel: [ 0.396031] Switching to clocksource hpet
Feb 6 07:22:42 debian kernel: [ 0.398437] pnp: PnP ACPI init
Feb 6 07:22:42 debian kernel: [ 0.398481] ACPI: bus type pnp registered
Feb 6 07:22:42 debian kernel: [ 0.403994] pnp: PnP ACPI: found 12 devices
Feb 6 07:22:42 debian kernel: [ 0.404000] ACPI: ACPI bus type pnp unregiste$
Feb 6 07:22:42 debian kernel: [ 0.404009] PnPBIOS: Disabled by ACPI PNP
Feb 6 07:22:42 debian kernel: [ 0.404035] system 00:01: iomem range 0xf0000$
FФайл: messages Строка 3 Позиция 0 46246 байт 7%
Feb 6 07:21:15 debian kernel: [158847.272140] nfsd: last server has exited, flushing export cache
Feb 6 07:21:57 debian kernel: Kernel logging (proc) stopped.
Feb 6 07:21:57 debian rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="1150" x-info="http://www.rsyslog.com"] exiting on signal 15.
Feb 6 07:22:42 debian kernel: imklog 4.6.4, log source = /proc/kmsg started.
Feb 6 07:22:42 debian rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="1172" x-info="http://www.rsyslog.com"] (re)start
Feb 6 07:22:42 debian kernel: [ 0.000000] Initializing cgroup subsys cpuset
Feb 6 07:22:42 debian kernel: [ 0.000000] Initializing cgroup subsys cpu
Feb 6 07:22:42 debian kernel: [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Ja
n 16 16:04:25 UTC 2012
Feb 6 07:22:42 debian kernel: [ 0.000000] KERNEL supported cpus:
Feb 6 07:22:42 debian kernel: [ 0.000000] Intel GenuineIntel
Feb 6 07:22:42 debian kernel: [ 0.000000] AMD AuthenticAMD
Feb 6 07:22:42 debian kernel: [ 0.000000] NSC Geode by NSC
Feb 6 07:22:42 debian kernel: [ 0.000000] Cyrix CyrixInstead
Feb 6 07:22:42 debian kernel: [ 0.000000] Centaur CentaurHauls
Feb 6 07:22:42 debian kernel: [ 0.000000] Transmeta GenuineTMx86
Feb 6 07:22:42 debian kernel: [ 0.000000] Transmeta TransmetaCPU
Feb 6 07:22:42 debian kernel: [ 0.000000] UMC UMC UMC UMC
Feb 6 07:22:42 debian kernel: [ 0.000000] BIOS-provided physical RAM map:
Feb 6 07:22:42 debian kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
Feb 6 07:22:42 debian kernel: [ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
Feb 6 07:22:42 debian kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Feb 6 07:22:42 debian kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f535000 (usable)
Feb 6 07:22:42 debian kernel: [ 0.000000] BIOS-e820: 000000007f535000 - 000000007f53d000 (reserved)
Feb 6 07:22:42 debian kernel: [ 0.000000] BIOS-e820: 000000007f53d000 - 000000007f5cd000 (usable)
Feb 6 07:22:42 debian kernel: [ 0.000000] BIOS-e820: 000000007f5cd000 - 000000007f5d1000 (reserved)
Feb 6 07:22:42 debian kernel: [ 0.000000] BIOS-e820: 000000007f5d1000 - 000000007f660000 (usable)
Feb 6 07:22:42 debian kernel: [ 0.000000] BIOS-e820: 000000007f660000 - 000000007f6f0000 (ACPI NVS)
Feb 6 07:22:42 debian kernel: [ 0.000000] BIOS-e820: 000000007f6f0000 - 000000007f6f3000 (usable)
Feb 6 07:22:42 debian kernel: [ 0.000000] BIOS-e820: 000000007f6f3000 - 000000007f6ff000 (ACPI data)
Feb 6 07:22:42 debian kernel: [ 0.000000] BIOS-e820: 000000007f6ff000 - 000000007f700000 (usable)
Feb 6 07:22:42 debian kernel: [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
Feb 6 07:22:42 debian kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 0000000100000000 (reserved)
Feb 6 07:22:42 debian kernel: [ 0.000000] DMI 2.4 present.
Feb 6 07:22:42 debian kernel: [ 0.000000] last_pfn = 0x7f700 max_arch_pfn = 0x100000
Feb 6 07:22:42 debian kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Файл: messages Строка 38 Позиция 046246 байт 15%
Feb 6 07:22:42 debian kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
Feb 6 07:22:42 debian kernel: [ 0.000000] RAMDISK: 37dd3000 - 37fef818
Feb 6 07:22:42 debian kernel: [ 0.000000] Allocated new RAMDISK: 00100000 - 0031c818
Feb 6 07:22:42 debian kernel: [ 0.000000] Move RAMDISK from 0000000037dd3000 - 0000000037fef817 to 00100000 - 0031c817
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: RSDP 000fe020 00014 (v00 INTEL )
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: RSDT 7f6fd038 00038 (v01 INTEL D945GLF2 000000B6 01000013)
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: FACP 7f6fc000 00074 (v01 INTEL D945GLF2 000000B6 MSFT 01000013)
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: DSDT 7f6f7000 045EC (v01 INTEL D945GLF2 000000B6 MSFT 01000013)
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: FACS 7f6a3000 00040
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: APIC 7f6f6000 00078 (v01 INTEL D945GLF2 000000B6 MSFT 01000013)
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: WDDT 7f6f5000 00040 (v01 INTEL D945GLF2 000000B6 MSFT 01000013)
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: MCFG 7f6f4000 0003C (v01 INTEL D945GLF2 000000B6 MSFT 01000013)
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: ASF! 7f6f3000 000A6 (v32 INTEL D945GLF2 000000B6 MSFT 01000013)
Feb 6 07:22:42 debian kernel: [ 0.000000] 1155MB HIGHMEM available.
Feb 6 07:22:42 debian kernel: [ 0.000000] 883MB LOWMEM available.
Feb 6 07:22:42 debian kernel: [ 0.000000] mapped low ram: 0 - 373fe000
Feb 6 07:22:42 debian kernel: [ 0.000000] low ram: 0 - 373fe000
Feb 6 07:22:42 debian kernel: [ 0.000000] node 0 low ram: 00000000 - 373fe000
Feb 6 07:22:42 debian kernel: [ 0.000000] node 0 bootmap 00009000 - 0000fe80
Feb 6 07:22:42 debian kernel: [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
Feb 6 07:22:42 debian kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Feb 6 07:22:42 debian kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
Feb 6 07:22:42 debian kernel: [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
Feb 6 07:22:42 debian kernel: [ 0.000000] #3 [0001000000 - 00014ccd2c] TEXT DATA BSS ==> [0001000000 - 00014ccd2c]
Feb 6 07:22:42 debian kernel: [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
Feb 6 07:22:42 debian kernel: [ 0.000000] #5 [00014cd000 - 00014d316e] BRK ==> [00014cd000 - 00014d316e]
Feb 6 07:22:42 debian kernel: [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
Feb 6 07:22:42 debian kernel: [ 0.000000] #7 [0000100000 - 000031c818] NEW RAMDISK ==> [0000100000 - 000031c818]
Feb 6 07:22:42 debian kernel: [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
Feb 6 07:22:42 debian kernel: [ 0.000000] found SMP MP-table at [c00fe200] fe200
Feb 6 07:22:42 debian kernel: [ 0.000000] Zone PFN ranges:
Feb 6 07:22:42 debian kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000
Feb 6 07:22:42 debian kernel: [ 0.000000] Normal 0x00001000 -> 0x000373fe
Feb 6 07:22:42 debian kernel: [ 0.000000] HighMem 0x000373fe -> 0x0007f700
Feb 6 07:22:42 debian kernel: [ 0.000000] Movable zone start PFN for each node
Feb 6 07:22:42 debian kernel: [ 0.000000] early_node_map[6] active PFN ranges
Файл: messages Строка 74 Позиция 046246 байт 22%
Feb 6 07:22:42 debian kernel: [ 0.000000] 0: 0x00000000 -> 0x0000008f
Feb 6 07:22:42 debian kernel: [ 0.000000] 0: 0x00000100 -> 0x0007f535
Feb 6 07:22:42 debian kernel: [ 0.000000] 0: 0x0007f53d -> 0x0007f5cd
Feb 6 07:22:42 debian kernel: [ 0.000000] 0: 0x0007f5d1 -> 0x0007f660
Feb 6 07:22:42 debian kernel: [ 0.000000] 0: 0x0007f6f0 -> 0x0007f6f3
Feb 6 07:22:42 debian kernel: [ 0.000000] 0: 0x0007f6ff -> 0x0007f700
Feb 6 07:22:42 debian kernel: [ 0.000000] Using APIC driver default
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Feb 6 07:22:42 debian kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Feb 6 07:22:42 debian kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Feb 6 07:22:42 debian kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Feb 6 07:22:42 debian kernel: [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
Feb 6 07:22:42 debian kernel: [ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
Feb 6 07:22:42 debian kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Feb 6 07:22:42 debian kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Feb 6 07:22:42 debian kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
Feb 6 07:22:42 debian kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Feb 6 07:22:42 debian kernel: [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
Feb 6 07:22:42 debian kernel: [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34328 r0 d23016 u1048576
Feb 6 07:22:42 debian kernel: [ 0.000000] pcpu-alloc: s34328 r0 d23016 u1048576 alloc=1*4194304
Feb 6 07:22:42 debian kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3
Feb 6 07:22:42 debian kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517624
Feb 6 07:22:42 debian kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=b758b55f-085e-4511-823f-2f5af10b64fb ro quiet
Feb 6 07:22:42 debian kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Feb 6 07:22:42 debian kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Feb 6 07:22:42 debian kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Feb 6 07:22:42 debian kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Feb 6 07:22:42 debian kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Файл: messages Строка 110 Позиция 46246 байт 29%
Feb 6 07:22:42 debian kernel: [ 0.000000] Initializing CPU#0
Feb 6 07:22:42 debian kernel: [ 0.000000] Initializing HighMem for node 0 (000373fe:0007f700)
Feb 6 07:22:42 debian kernel: [ 0.000000] Memory: 2061128k/2087936k available (2506k kernel code, 24524k reserved, 1326k data, 380k init, 1182056k highmem)
Feb 6 07:22:42 debian kernel: [ 0.000000] virtual kernel memory layout:
Feb 6 07:22:42 debian kernel: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
Feb 6 07:22:42 debian kernel: [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
Feb 6 07:22:42 debian kernel: [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
Feb 6 07:22:42 debian kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
Feb 6 07:22:42 debian kernel: [ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
Feb 6 07:22:42 debian kernel: [ 0.000000] .data : 0xc1272a57 - 0xc13be4c4 (1326 kB)
Feb 6 07:22:42 debian kernel: [ 0.000000] .text : 0xc1000000 - 0xc1272a57 (2506 kB)
Feb 6 07:22:42 debian kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Feb 6 07:22:42 debian kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Feb 6 07:22:42 debian kernel: [ 0.000000] Hierarchical RCU implementation.
Feb 6 07:22:42 debian kernel: [ 0.000000] NR_IRQS:1280
Feb 6 07:22:42 debian kernel: [ 0.000000] Console: colour VGA+ 80x25
Feb 6 07:22:42 debian kernel: [ 0.000000] console [tty0] enabled
Feb 6 07:22:42 debian kernel: [ 0.000000] Fast TSC calibration using PIT
Feb 6 07:22:42 debian kernel: [ 0.000000] Detected 1595.705 MHz processor.
Feb 6 07:22:42 debian kernel: [ 0.008011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.41 BogoMIPS (lpj=6382820)
Feb 6 07:22:42 debian kernel: [ 0.008050] Security Framework initialized
Feb 6 07:22:42 debian kernel: [ 0.008059] SELinux: Disabled at boot.
Feb 6 07:22:42 debian kernel: [ 0.008076] Mount-cache hash table entries: 512
Feb 6 07:22:42 debian kernel: [ 0.008308] Initializing cgroup subsys ns
Feb 6 07:22:42 debian kernel: [ 0.008317] Initializing cgroup subsys cpuacct
Feb 6 07:22:42 debian kernel: [ 0.008327] Initializing cgroup subsys devices
Feb 6 07:22:42 debian kernel: [ 0.008332] Initializing cgroup subsys freezer
Feb 6 07:22:42 debian kernel: [ 0.008337] Initializing cgroup subsys net_cls
Feb 6 07:22:42 debian kernel: [ 0.008378] CPU: L1 I cache: 32K, L1 D cache: 24K
Feb 6 07:22:42 debian kernel: [ 0.008384] CPU: L2 cache: 512K
Feb 6 07:22:42 debian kernel: [ 0.008389] CPU: Physical Processor ID: 0
Feb 6 07:22:42 debian kernel: [ 0.008393] CPU: Processor Core ID: 0
Feb 6 07:22:42 debian kernel: [ 0.008400] mce: CPU supports 5 MCE banks
Feb 6 07:22:42 debian kernel: [ 0.008416] CPU0: Thermal monitoring enabled (TM1)
Feb 6 07:22:42 debian kernel: [ 0.008424] using mwait in idle threads.
Feb 6 07:22:42 debian kernel: [ 0.008435] Performance Events: Atom events, Intel PMU driver.
Файл: messages Строка 146 Позиция 46246 байт 36%
Feb 6 07:22:42 debian kernel: [ 0.008448] ... version: 3
Feb 6 07:22:42 debian kernel: [ 0.008452] ... bit width: 40
Feb 6 07:22:42 debian kernel: [ 0.008456] ... generic registers: 2
Feb 6 07:22:42 debian kernel: [ 0.008461] ... value mask: 000000ffffffffff
Feb 6 07:22:42 debian kernel: [ 0.008465] ... max period: 000000007fffffff
Feb 6 07:22:42 debian kernel: [ 0.008469] ... fixed-purpose events: 3
Feb 6 07:22:42 debian kernel: [ 0.008474] ... event mask: 0000000700000003
Feb 6 07:22:42 debian kernel: [ 0.008483] Checking 'hlt' instruction... OK.
Feb 6 07:22:42 debian kernel: [ 0.025629] ACPI: Core revision 20090903
Feb 6 07:22:42 debian kernel: [ 0.035985] Enabling APIC mode: Flat. Using 1 I/O APICs
Feb 6 07:22:42 debian kernel: [ 0.036417] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Feb 6 07:22:42 debian kernel: [ 0.076107] CPU0: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
Feb 6 07:22:42 debian kernel: [ 0.080001] Booting processor 1 APIC 0x2 ip 0x6000
Feb 6 07:22:42 debian kernel: [ 0.012000] Initializing CPU#1
Feb 6 07:22:42 debian kernel: [ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 24K
Feb 6 07:22:42 debian kernel: [ 0.012000] CPU: L2 cache: 512K
Feb 6 07:22:42 debian kernel: [ 0.012000] CPU: Physical Processor ID: 0
Feb 6 07:22:42 debian kernel: [ 0.012000] CPU: Processor Core ID: 1
Feb 6 07:22:42 debian kernel: [ 0.012000] CPU1: Thermal monitoring enabled (TM1)
Feb 6 07:22:42 debian kernel: [ 0.164134] CPU1: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
Feb 6 07:22:42 debian kernel: [ 0.164150] checking TSC synchronization [CPU#0 -> CPU#1]:
Feb 6 07:22:42 debian kernel: [ 0.168001] Measured 72 cycles TSC warp between CPUs, turning off TSC clock.
Feb 6 07:22:42 debian kernel: [ 0.168001] Marking TSC unstable due to check_tsc_sync_source failed
Feb 6 07:22:42 debian kernel: [ 0.168263] Booting processor 2 APIC 0x1 ip 0x6000
Feb 6 07:22:42 debian kernel: [ 0.012000] Initializing CPU#2
Feb 6 07:22:42 debian kernel: [ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 24K
Feb 6 07:22:42 debian kernel: [ 0.012000] CPU: L2 cache: 512K
Feb 6 07:22:42 debian kernel: [ 0.012000] CPU: Physical Processor ID: 0
Feb 6 07:22:42 debian kernel: [ 0.012000] CPU: Processor Core ID: 0
Feb 6 07:22:42 debian kernel: [ 0.012000] CPU2: Thermal monitoring enabled (TM1)
Feb 6 07:22:42 debian kernel: [ 0.256111] CPU2: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
Feb 6 07:22:42 debian kernel: [ 0.256326] Booting processor 3 APIC 0x3 ip 0x6000
Feb 6 07:22:42 debian kernel: [ 0.012000] Initializing CPU#3
Feb 6 07:22:42 debian kernel: [ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 24K
Feb 6 07:22:42 debian kernel: [ 0.012000] CPU: L2 cache: 512K
Feb 6 07:22:42 debian kernel: [ 0.012000] CPU: Physical Processor ID: 0
Файл: messages Строка 182 Позиция 46246 байт 43%
Feb 6 07:22:42 debian kernel: [ 0.012000] CPU: Processor Core ID: 1
Feb 6 07:22:42 debian kernel: [ 0.012000] CPU3: Thermal monitoring enabled (TM1)
Feb 6 07:22:42 debian kernel: [ 0.344090] CPU3: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
Feb 6 07:22:42 debian kernel: [ 0.344135] Brought up 4 CPUs
Feb 6 07:22:42 debian kernel: [ 0.344141] Total of 4 processors activated (13087.08 BogoMIPS).
Feb 6 07:22:42 debian kernel: [ 0.346358] devtmpfs: initialized
Feb 6 07:22:42 debian kernel: [ 0.346358] regulator: core version 0.5
Feb 6 07:22:42 debian kernel: [ 0.346358] NET: Registered protocol family 16
Feb 6 07:22:42 debian kernel: [ 0.346358] ACPI: bus type pci registered
Feb 6 07:22:42 debian kernel: [ 0.348146] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
Feb 6 07:22:42 debian kernel: [ 0.348154] PCI: MCFG area at f0000000 reserved in E820
Feb 6 07:22:42 debian kernel: [ 0.348158] PCI: Using MMCONFIG for extended config space
Feb 6 07:22:42 debian kernel: [ 0.348163] PCI: Using configuration type 1 for base access
Feb 6 07:22:42 debian kernel: [ 0.348836] bio: create slab <bio-0> at 0
Feb 6 07:22:42 debian kernel: [ 0.355347] ACPI: Interpreter enabled
Feb 6 07:22:42 debian kernel: [ 0.355356] ACPI: (supports S0 S1 S4 S5)
Feb 6 07:22:42 debian kernel: [ 0.355397] ACPI: Using IOAPIC for interrupt routing
Feb 6 07:22:42 debian kernel: [ 0.363842] ACPI: No dock devices found.
Feb 6 07:22:42 debian kernel: [ 0.365885] ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 6 07:22:42 debian kernel: [ 0.366205] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Feb 6 07:22:42 debian kernel: [ 0.366213] pci 0000:00:1b.0: PME# disabled
Feb 6 07:22:42 debian kernel: [ 0.366292] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Feb 6 07:22:42 debian kernel: [ 0.366299] pci 0000:00:1c.0: PME# disabled
Feb 6 07:22:42 debian kernel: [ 0.366381] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Feb 6 07:22:42 debian kernel: [ 0.366388] pci 0000:00:1c.2: PME# disabled
Feb 6 07:22:42 debian kernel: [ 0.366467] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Feb 6 07:22:42 debian kernel: [ 0.366475] pci 0000:00:1c.3: PME# disabled
Feb 6 07:22:42 debian kernel: [ 0.366846] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Feb 6 07:22:42 debian kernel: [ 0.366854] pci 0000:00:1d.7: PME# disabled
Feb 6 07:22:42 debian kernel: [ 0.367023] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
Feb 6 07:22:42 debian kernel: [ 0.367254] pci 0000:00:1f.2: PME# supported from D3hot
Feb 6 07:22:42 debian kernel: [ 0.367261] pci 0000:00:1f.2: PME# disabled
Feb 6 07:22:42 debian kernel: [ 0.367516] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Feb 6 07:22:42 debian kernel: [ 0.367524] pci 0000:01:00.0: PME# disabled
Feb 6 07:22:42 debian kernel: [ 0.372282] pci 0000:00:1e.0: transparent bridge
Feb 6 07:22:42 debian kernel: [ 0.382340] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
Файл: messages Строка 218 Позиция 46246 байт 50%
Feb 6 07:22:42 debian kernel: [ 0.382548] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Feb 6 07:22:42 debian kernel: [ 0.382752] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
Feb 6 07:22:42 debian kernel: [ 0.382953] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
Feb 6 07:22:42 debian kernel: [ 0.383152] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Feb 6 07:22:42 debian kernel: [ 0.383355] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Feb 6 07:22:42 debian kernel: [ 0.383558] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
Feb 6 07:22:42 debian kernel: [ 0.383760] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
Feb 6 07:22:42 debian kernel: [ 0.383965] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Feb 6 07:22:42 debian kernel: [ 0.383985] vgaarb: loaded
Feb 6 07:22:42 debian kernel: [ 0.384085] PCI: Using ACPI for IRQ routing
Feb 6 07:22:42 debian kernel: [ 0.384531] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Feb 6 07:22:42 debian kernel: [ 0.384541] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Feb 6 07:22:42 debian kernel: [ 0.384552] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Feb 6 07:22:42 debian kernel: [ 0.396031] Switching to clocksource hpet
Feb 6 07:22:42 debian kernel: [ 0.398437] pnp: PnP ACPI init
Feb 6 07:22:42 debian kernel: [ 0.398481] ACPI: bus type pnp registered
Feb 6 07:22:42 debian kernel: [ 0.403994] pnp: PnP ACPI: found 12 devices
Feb 6 07:22:42 debian kernel: [ 0.404000] ACPI: ACPI bus type pnp unregistered
Feb 6 07:22:42 debian kernel: [ 0.404009] PnPBIOS: Disabled by ACPI PNP
Feb 6 07:22:42 debian kernel: [ 0.404035] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
Feb 6 07:22:42 debian kernel: [ 0.404043] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
Feb 6 07:22:42 debian kernel: [ 0.404051] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
Feb 6 07:22:42 debian kernel: [ 0.404058] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Feb 6 07:22:42 debian kernel: [ 0.404066] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Feb 6 07:22:42 debian kernel: [ 0.404073] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
Feb 6 07:22:42 debian kernel: [ 0.404081] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
Feb 6 07:22:42 debian kernel: [ 0.404088] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
Feb 6 07:22:42 debian kernel: [ 0.404096] system 00:01: iomem range 0xc0000-0xdffff could not be reserved
Feb 6 07:22:42 debian kernel: [ 0.404104] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
Feb 6 07:22:42 debian kernel: [ 0.404120] system 00:06: ioport range 0x500-0x53f has been reserved
Feb 6 07:22:42 debian kernel: [ 0.404128] system 00:06: ioport range 0x400-0x47f has been reserved
Feb 6 07:22:42 debian kernel: [ 0.404135] system 00:06: ioport range 0x680-0x6ff has been reserved
Feb 6 07:22:42 debian kernel: [ 0.439876] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
Feb 6 07:22:42 debian kernel: [ 0.439883] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
Feb 6 07:22:42 debian kernel: [ 0.439892] pci 0000:00:1c.0: MEM window: 0x90100000-0x901fffff
Feb 6 07:22:42 debian kernel: [ 0.439900] pci 0000:00:1c.0: PREFETCH window: 0x00000090000000-0x000000900fffff
Файл: messages Строка 254 Позиция 46246 байт 58%
Feb 6 07:22:42 debian kernel: [ 0.439911] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
Feb 6 07:22:42 debian kernel: [ 0.439917] pci 0000:00:1c.2: IO window: 0x3000-0x3fff
Feb 6 07:22:42 debian kernel: [ 0.439926] pci 0000:00:1c.2: MEM window: 0x90300000-0x904fffff
Feb 6 07:22:42 debian kernel: [ 0.439934] pci 0000:00:1c.2: PREFETCH window: 0x00000090500000-0x000000906fffff
Feb 6 07:22:42 debian kernel: [ 0.439944] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
Feb 6 07:22:42 debian kernel: [ 0.439950] pci 0000:00:1c.3: IO window: 0x4000-0x4fff
Feb 6 07:22:42 debian kernel: [ 0.439959] pci 0000:00:1c.3: MEM window: 0x90700000-0x908fffff
Feb 6 07:22:42 debian kernel: [ 0.439967] pci 0000:00:1c.3: PREFETCH window: 0x00000090900000-0x00000090afffff
Feb 6 07:22:42 debian kernel: [ 0.439977] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
Feb 6 07:22:42 debian kernel: [ 0.439982] pci 0000:00:1e.0: IO window: disabled
Feb 6 07:22:42 debian kernel: [ 0.439989] pci 0000:00:1e.0: MEM window: disabled
Feb 6 07:22:42 debian kernel: [ 0.439996] pci 0000:00:1e.0: PREFETCH window: disabled
Feb 6 07:22:42 debian kernel: [ 0.440028] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 6 07:22:42 debian kernel: [ 0.440055] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Feb 6 07:22:42 debian kernel: [ 0.440079] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Feb 6 07:22:42 debian kernel: [ 0.440254] NET: Registered protocol family 2
Feb 6 07:22:42 debian kernel: [ 0.440455] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb 6 07:22:42 debian kernel: [ 0.441132] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Feb 6 07:22:42 debian kernel: [ 0.442105] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Feb 6 07:22:42 debian kernel: [ 0.442556] TCP: Hash tables configured (established 131072 bind 65536)
Feb 6 07:22:42 debian kernel: [ 0.442563] TCP reno registered
Feb 6 07:22:42 debian kernel: [ 0.442785] NET: Registered protocol family 1
Feb 6 07:22:42 debian kernel: [ 0.443177] Unpacking initramfs...
Feb 6 07:22:42 debian kernel: [ 0.541439] Freeing initrd memory: 2162k freed
Feb 6 07:22:42 debian kernel: [ 0.544338] audit: initializing netlink socket (disabled)
Feb 6 07:22:42 debian kernel: [ 0.544365] type=2000 audit(1328505745.544:1): initialized
Feb 6 07:22:42 debian kernel: [ 0.550362] highmem bounce pool size: 64 pages
Feb 6 07:22:42 debian kernel: [ 0.550374] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Feb 6 07:22:42 debian kernel: [ 0.553745] VFS: Disk quotas dquot_6.5.2
Feb 6 07:22:42 debian kernel: [ 0.553869] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb 6 07:22:42 debian kernel: [ 0.554027] msgmni has been set to 1723
Feb 6 07:22:42 debian kernel: [ 0.554620] alg: No test for stdrng (krng)
Feb 6 07:22:42 debian kernel: [ 0.554744] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Feb 6 07:22:42 debian kernel: [ 0.554751] io scheduler noop registered
Feb 6 07:22:42 debian kernel: [ 0.554756] io scheduler anticipatory registered
Feb 6 07:22:42 debian kernel: [ 0.554760] io scheduler deadline registered
Файл: messages Строка 290 Позиция 46246 байт 64%
Feb 6 07:22:42 debian kernel: [ 0.554841] io scheduler cfq registered (default)
Feb 6 07:22:42 debian kernel: [ 0.555774] isapnp: Scanning for PnP cards...
Feb 6 07:22:42 debian kernel: [ 0.944057] isapnp: No Plug & Play device found
Feb 6 07:22:42 debian kernel: [ 0.947388] Linux agpgart interface v0.103
Feb 6 07:22:42 debian kernel: [ 0.947542] agpgart-intel 0000:00:00.0: Intel 945G Chipset
Feb 6 07:22:42 debian kernel: [ 0.947859] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
Feb 6 07:22:42 debian kernel: [ 0.950579] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
Feb 6 07:22:42 debian kernel: [ 0.950721] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Feb 6 07:22:42 debian kernel: [ 0.950856] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 6 07:22:42 debian kernel: [ 0.951482] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 6 07:22:42 debian kernel: [ 0.951783] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Feb 6 07:22:42 debian kernel: [ 0.954952] serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 6 07:22:42 debian kernel: [ 0.954970] serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 6 07:22:42 debian kernel: [ 0.955168] mice: PS/2 mouse device common for all mice
Feb 6 07:22:42 debian kernel: [ 0.955253] rtc_cmos 00:03: RTC can wake from S4
Feb 6 07:22:42 debian kernel: [ 0.955344] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Feb 6 07:22:42 debian kernel: [ 0.955379] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
Feb 6 07:22:42 debian kernel: [ 0.955408] cpuidle: using governor ladder
Feb 6 07:22:42 debian kernel: [ 0.955413] cpuidle: using governor menu
Feb 6 07:22:42 debian kernel: [ 0.955423] No iBFT detected.
Feb 6 07:22:42 debian kernel: [ 0.956258] TCP cubic registered
Feb 6 07:22:42 debian kernel: [ 0.956589] NET: Registered protocol family 10
Feb 6 07:22:42 debian kernel: [ 0.958295] Mobile IPv6
Feb 6 07:22:42 debian kernel: [ 0.958303] NET: Registered protocol family 17
Feb 6 07:22:42 debian kernel: [ 0.958336] Using IPI No-Shortcut mode
Feb 6 07:22:42 debian kernel: [ 0.958576] registered taskstats version 1
Feb 6 07:22:42 debian kernel: [ 0.959079] rtc_cmos 00:03: setting system clock to 2012-02-06 05:22:26 UTC (1328505746)
Feb 6 07:22:42 debian kernel: [ 0.959240] Initalizing network drop monitor service
Feb 6 07:22:42 debian kernel: [ 0.959298] Freeing unused kernel memory: 380k freed
Feb 6 07:22:42 debian kernel: [ 0.959656] Write protecting the kernel text: 2508k
Feb 6 07:22:42 debian kernel: [ 0.959706] Write protecting the kernel read-only data: 920k
Feb 6 07:22:42 debian kernel: [ 0.977359] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Feb 6 07:22:42 debian kernel: [ 0.996965] udev[76]: starting version 164
Feb 6 07:22:42 debian kernel: [ 1.165499] SCSI subsystem initialized
Feb 6 07:22:42 debian kernel: [ 1.221950] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Feb 6 07:22:42 debian kernel: [ 1.222209] scsi0 : ata_piix
Файл: messages Строка 326 Позиция 46246 байт 72%
Feb 6 07:22:42 debian kernel: [ 1.222511] scsi1 : ata_piix
Feb 6 07:22:42 debian kernel: [ 1.223728] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20b0 irq 14
Feb 6 07:22:42 debian kernel: [ 1.223736] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20b8 irq 15
Feb 6 07:22:42 debian kernel: [ 1.223800] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Feb 6 07:22:42 debian kernel: [ 1.223809] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Feb 6 07:22:42 debian kernel: [ 1.376207] scsi2 : ata_piix
Feb 6 07:22:42 debian kernel: [ 1.376597] scsi3 : ata_piix
Feb 6 07:22:42 debian kernel: [ 1.376999] ata3: SATA max UDMA/133 cmd 0x20c8 ctl 0x20ec bmdma 0x20a0 irq 19
Feb 6 07:22:42 debian kernel: [ 1.377007] ata4: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e8 bmdma 0x20a8 irq 19
Feb 6 07:22:42 debian kernel: [ 1.396850] ata1.00: ATAPI: SAMSUNG CD-ROM SC-148S, SL03, max UDMA/33
Feb 6 07:22:42 debian kernel: [ 1.397061] ata1.01: ATA-6: WDC WD800BB-00JHC0, 05.01C05, max UDMA/100
Feb 6 07:22:42 debian kernel: [ 1.397069] ata1.01: 156301488 sectors, multi 16: LBA
Feb 6 07:22:42 debian kernel: [ 1.408280] ata1.00: configured for UDMA/33
Feb 6 07:22:42 debian kernel: [ 1.416397] ata1.01: configured for UDMA/100
Feb 6 07:22:42 debian kernel: [ 1.417382] scsi 0:0:0:0: CD-ROM SAMSUNG CD-ROM SC-148S SL03 PQ: 0 ANSI: 5
Feb 6 07:22:42 debian kernel: [ 1.417942] scsi 0:0:1:0: Direct-Access ATA WDC WD800BB-00JH 05.0 PQ: 0 ANSI: 5
Feb 6 07:22:42 debian kernel: [ 1.571748] sd 0:0:1:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
Feb 6 07:22:42 debian kernel: [ 1.571951] sd 0:0:1:0: [sda] Write Protect is off
Feb 6 07:22:42 debian kernel: [ 1.572062] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 6 07:22:42 debian kernel: [ 1.572538] sda: sda1 sda2 < sda5 sda6 >
Feb 6 07:22:42 debian kernel: [ 1.607101] sd 0:0:1:0: [sda] Attached SCSI disk
Feb 6 07:22:42 debian kernel: [ 2.000314] PM: Starting manual resume from disk
Feb 6 07:22:42 debian kernel: [ 2.069634] kjournald starting. Commit interval 5 seconds
Feb 6 07:22:42 debian kernel: [ 2.069649] EXT3-fs: mounted filesystem with ordered data mode.
Feb 6 07:22:42 debian kernel: [ 3.762179] udev[323]: starting version 164
Feb 6 07:22:42 debian kernel: [ 4.911148] usbcore: registered new interface driver usbfs
Feb 6 07:22:42 debian kernel: [ 4.911239] usbcore: registered new interface driver hub
Feb 6 07:22:42 debian kernel: [ 4.912105] usbcore: registered new device driver usb
Feb 6 07:22:42 debian kernel: [ 4.912265] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
Feb 6 07:22:42 debian kernel: [ 4.916417] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
Feb 6 07:22:42 debian kernel: [ 4.916445] ACPI: Sleep Button [SLPB]
Feb 6 07:22:42 debian kernel: [ 4.916663] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Feb 6 07:22:42 debian kernel: [ 4.916677] ACPI: Power Button [PWRF]
Feb 6 07:22:42 debian kernel: [ 4.923009] input: PC Speaker as /devices/platform/pcspkr/input/input4
Feb 6 07:22:42 debian kernel: [ 4.946436] processor LNXCPU:00: registered as cooling_device0
Feb 6 07:22:42 debian kernel: [ 4.946590] processor LNXCPU:01: registered as cooling_device1
Файл: messages Строка 362 Позиция 46246 байт 80%
Feb 6 07:22:42 debian kernel: [ 4.946750] processor LNXCPU:02: registered as cooling_device2
Feb 6 07:22:42 debian kernel: [ 4.946897] processor LNXCPU:03: registered as cooling_device3
Feb 6 07:22:42 debian kernel: [ 5.012434] parport_pc 00:07: reported by Plug and Play ACPI
Feb 6 07:22:42 debian kernel: [ 5.012508] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Feb 6 07:22:42 debian kernel: [ 5.018953] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Feb 6 07:22:42 debian kernel: [ 5.019035] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Feb 6 07:22:42 debian kernel: [ 5.118428] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Feb 6 07:22:42 debian kernel: [ 5.118545] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 6 07:22:42 debian kernel: [ 5.119700] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Feb 6 07:22:42 debian kernel: [ 5.119790] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Feb 6 07:22:42 debian kernel: [ 5.119859] ehci_hcd 0000:00:1d.7: using broken periodic workaround
Feb 6 07:22:42 debian kernel: [ 5.119882] ehci_hcd 0000:00:1d.7: debug port 1
Feb 6 07:22:42 debian kernel: [ 5.123848] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x902c4000
Feb 6 07:22:42 debian kernel: [ 5.140030] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Feb 6 07:22:42 debian kernel: [ 5.140100] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Feb 6 07:22:42 debian kernel: [ 5.140107] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 6 07:22:42 debian kernel: [ 5.140113] usb usb1: Product: EHCI Host Controller
Feb 6 07:22:42 debian kernel: [ 5.140118] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
Feb 6 07:22:42 debian kernel: [ 5.140123] usb usb1: SerialNumber: 0000:00:1d.7
Feb 6 07:22:42 debian kernel: [ 5.140322] usb usb1: configuration #1 chosen from 1 choice
Feb 6 07:22:42 debian kernel: [ 5.140428] hub 1-0:1.0: USB hub found
Feb 6 07:22:42 debian kernel: [ 5.140455] hub 1-0:1.0: 8 ports detected
Feb 6 07:22:42 debian kernel: [ 5.149136] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Feb 6 07:22:42 debian kernel: [ 5.149191] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 6 07:22:42 debian kernel: [ 5.150847] r8169 0000:01:00.0: eth0: RTL8168c/8111c at 0xf81e2000, 00:1c:c0:f1:cb:c8, XID 1c4000c0 IRQ 27
Feb 6 07:22:42 debian kernel: [ 5.158564] intel_rng: Firmware space is locked read-only. If you can't or
Feb 6 07:22:42 debian kernel: [ 5.158570] intel_rng: don't want to disable this in firmware setup, and if
Feb 6 07:22:42 debian kernel: [ 5.158575] intel_rng: you are certain that your system has a functional
Feb 6 07:22:42 debian kernel: [ 5.158579] intel_rng: RNG, try using the 'no_fwh_detect' option.
Feb 6 07:22:42 debian kernel: [ 5.318765] uhci_hcd: USB Universal Host Controller Interface driver
Feb 6 07:22:42 debian kernel: [ 5.318914] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 6 07:22:42 debian kernel: [ 5.318948] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Feb 6 07:22:42 debian kernel: [ 5.318994] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Feb 6 07:22:42 debian kernel: [ 5.319052] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
Feb 6 07:22:42 debian kernel: [ 5.319735] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Feb 6 07:22:42 debian kernel: [ 5.319743] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Файл: messages Строка 398 Позиция 46246 байт 87%
Feb 6 07:22:42 debian kernel: [ 5.319750] usb usb2: Product: UHCI Host Controller
Feb 6 07:22:42 debian kernel: [ 5.319755] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Feb 6 07:22:42 debian kernel: [ 5.319760] usb usb2: SerialNumber: 0000:00:1d.0
Feb 6 07:22:42 debian kernel: [ 5.319989] usb usb2: configuration #1 chosen from 1 choice
Feb 6 07:22:42 debian kernel: [ 5.320129] hub 2-0:1.0: USB hub found
Feb 6 07:22:42 debian kernel: [ 5.320154] hub 2-0:1.0: 2 ports detected
Feb 6 07:22:42 debian kernel: [ 5.320323] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Feb 6 07:22:42 debian kernel: [ 5.320356] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Feb 6 07:22:42 debian kernel: [ 5.320388] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Feb 6 07:22:42 debian kernel: [ 5.320438] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
Feb 6 07:22:42 debian kernel: [ 5.320549] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Feb 6 07:22:42 debian kernel: [ 5.320559] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 6 07:22:42 debian kernel: [ 5.320567] usb usb3: Product: UHCI Host Controller
Feb 6 07:22:42 debian kernel: [ 5.320575] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Feb 6 07:22:42 debian kernel: [ 5.320582] usb usb3: SerialNumber: 0000:00:1d.1
Feb 6 07:22:42 debian kernel: [ 5.321002] usb usb3: configuration #1 chosen from 1 choice
Feb 6 07:22:42 debian kernel: [ 5.321234] hub 3-0:1.0: USB hub found
Feb 6 07:22:42 debian kernel: [ 5.321260] hub 3-0:1.0: 2 ports detected
Feb 6 07:22:42 debian kernel: [ 5.321433] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Feb 6 07:22:42 debian kernel: [ 5.321463] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Feb 6 07:22:42 debian kernel: [ 5.321496] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Feb 6 07:22:42 debian kernel: [ 5.321567] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
Feb 6 07:22:42 debian kernel: [ 5.321678] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Feb 6 07:22:42 debian kernel: [ 5.321685] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 6 07:22:42 debian kernel: [ 5.321691] usb usb4: Product: UHCI Host Controller
Feb 6 07:22:42 debian kernel: [ 5.321696] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Feb 6 07:22:42 debian kernel: [ 5.321702] usb usb4: SerialNumber: 0000:00:1d.2
Feb 6 07:22:42 debian kernel: [ 5.322194] usb usb4: configuration #1 chosen from 1 choice
Feb 6 07:22:42 debian kernel: [ 5.322435] hub 4-0:1.0: USB hub found
Feb 6 07:22:42 debian kernel: [ 5.322464] hub 4-0:1.0: 2 ports detected
Feb 6 07:22:42 debian kernel: [ 5.322634] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
Feb 6 07:22:42 debian kernel: [ 5.322664] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Feb 6 07:22:42 debian kernel: [ 5.322693] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Feb 6 07:22:42 debian kernel: [ 5.322760] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
Feb 6 07:22:42 debian kernel: [ 5.322867] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Feb 6 07:22:42 debian kernel: [ 5.322877] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Файл: messages Строка 434 Позиция 46246 байт 95%
Feb 6 07:22:42 debian kernel: [ 5.322886] usb usb5: Product: UHCI Host Controller
Feb 6 07:22:42 debian kernel: [ 5.322893] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Feb 6 07:22:42 debian kernel: [ 5.322900] usb usb5: SerialNumber: 0000:00:1d.3
Feb 6 07:22:42 debian kernel: [ 5.323315] usb usb5: configuration #1 chosen from 1 choice
Feb 6 07:22:42 debian kernel: [ 5.323555] hub 5-0:1.0: USB hub found
Feb 6 07:22:42 debian kernel: [ 5.323577] hub 5-0:1.0: 2 ports detected
Feb 6 07:22:42 debian kernel: [ 5.449058] usb 1-3: new high speed USB device using ehci_hcd and address 2
Feb 6 07:22:42 debian kernel: [ 5.478741] [drm] Initialized drm 1.1.0 20060810
Feb 6 07:22:42 debian kernel: [ 5.601067] usb 1-3: New USB device found, idVendor=0ac8, idProduct=3450
Feb 6 07:22:42 debian kernel: [ 5.601079] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb 6 07:22:42 debian kernel: [ 5.601088] usb 1-3: Product: Vimicro USB Camera (Altair)
Feb 6 07:22:42 debian kernel: [ 5.601096] usb 1-3: Manufacturer: Vimicro
Feb 6 07:22:42 debian kernel: [ 5.601386] usb 1-3: configuration #1 chosen from 1 choice
Feb 6 07:22:42 debian kernel: [ 5.679014] sr0: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
Feb 6 07:22:42 debian kernel: [ 5.679022] Uniform CD-ROM driver Revision: 3.20
Feb 6 07:22:42 debian kernel: [ 5.773139] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 6 07:22:42 debian kernel: [ 5.787476] [drm] set up 7M of stolen space
Feb 6 07:22:42 debian kernel: [ 5.942099] Linux video capture interface: v2.00
Feb 6 07:22:42 debian kernel: [ 6.008366] sr 0:0:0:0: Attached scsi generic sg0 type 5
Feb 6 07:22:42 debian kernel: [ 6.008531] sd 0:0:1:0: Attached scsi generic sg1 type 0
Feb 6 07:22:42 debian kernel: [ 6.155015] uvcvideo: Found UVC 1.00 device Vimicro USB Camera (Altair) (0ac8:3450)
Feb 6 07:22:42 debian kernel: [ 6.157491] input: Vimicro USB Camera (Altair) as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input5
Feb 6 07:22:42 debian kernel: [ 6.157822] usbcore: registered new interface driver uvcvideo
Feb 6 07:22:42 debian kernel: [ 6.157836] USB Video Class driver (v0.1.0)
Feb 6 07:22:42 debian kernel: [ 6.458118] [drm] initialized overlay support
Feb 6 07:22:42 debian kernel: [ 6.767351] Console: switching to colour frame buffer device 170x48
Feb 6 07:22:42 debian kernel: [ 6.780837] fb0: inteldrmfb frame buffer device
Feb 6 07:22:42 debian kernel: [ 6.780842] registered panic notifier
Feb 6 07:22:42 debian kernel: [ 6.780857] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Feb 6 07:22:42 debian kernel: [ 6.780954] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Feb 6 07:22:42 debian kernel: [ 6.877003] hda_codec: ALC662 rev1: BIOS auto-probing.
Feb 6 07:22:42 debian kernel: [ 6.878757] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
Feb 6 07:22:42 debian kernel: [ 7.572620] Adding 2783224k swap on /dev/sda5. Priority:-1 extents:1 across:2783224k
Feb 6 07:22:42 debian kernel: [ 7.948562] EXT3 FS on sda1, internal journal
Feb 6 07:22:42 debian kernel: [ 8.084885] loop: module loaded
Feb 6 07:22:42 debian kernel: [ 8.970326] kjournald starting. Commit interval 5 seconds
Feb 6 07:22:42 debian kernel: [ 8.970635] EXT3 FS on sda6, internal journal
Feb 6 07:22:42 debian kernel: [ 8.970646] EXT3-fs: mounted filesystem with ordered data mode.
Feb 6 07:22:42 debian kernel: [ 9.680969] r8169 0000:01:00.0: eth0: link down
Feb 6 07:22:42 debian kernel: [ 9.680987] r8169 0000:01:00.0: eth0: link down
Feb 6 07:22:42 debian kernel: [ 9.681425] ADDRCONF(NETDEV_UP): eth0: link is not ready
Feb 6 07:22:42 debian kernel: [ 10.925308] fuse init (API version 7.13)
Feb 6 07:22:42 debian kernel: [ 12.241579] RPC: Registered udp transport module.
Feb 6 07:22:42 debian kernel: [ 12.241585] RPC: Registered tcp transport module.
Feb 6 07:22:42 debian kernel: [ 12.241590] RPC: Registered tcp NFSv4.1 backchannel transport module.
Feb 6 07:22:42 debian kernel: [ 12.362289] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Feb 6 07:22:42 debian kernel: [ 12.426981] svc: failed to register lockdv1 RPC service (errno 97).
Feb 6 07:22:42 debian kernel: [ 12.429827] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Feb 6 07:22:42 debian kernel: [ 12.439384] NFSD: starting 90-second grace period
Feb 6 07:22:42 debian kernel: [ 12.753873] r8169 0000:01:00.0: eth0: link up
Feb 6 07:22:42 debian kernel: [ 12.754266] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Feb 6 07:22:42 debian kernel: [ 15.883395] Slow work thread pool: Starting up
Feb 6 07:22:42 debian kernel: [ 15.883573] Slow work thread pool: Ready
Feb 6 07:22:42 debian kernel: [ 15.883914] FS-Cache: Loaded
Feb 6 07:22:42 debian kernel: [ 15.949957] FS-Cache: Netfs 'nfs' registered for caching
Feb 6 07:22:49 debian kernel: [ 23.894408] lp0: using parport0 (interrupt-driven).
Feb 6 07:22:49 debian kernel: [ 23.915022] ppdev: user-space parallel port driver
Feb 6 07:22:53 debian kernel: [ 28.179731] ip_tables: (C) 2000-2006 Netfilter Core Team
Feb 6 07:37:42 debian rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="1172" x-info="http://www.rsyslog.com"] rsyslogd was HUPed, type 'lightweight'.
Feb 6 08:54:12 debian kernel: [ 5506.519066] process `skype' is using obsolete setsockopt SO_BSDCOMPAT

Вот а как делать code/code не знаю Достаточно информации или dmesg надо ещё ?

06.02.2012 12:37 #227252

pavlar написал:
Вот а как делать code/code не знаю Достаточно информации или dmesg надо ещё ?

Ну ту под spoiler же убираешь текст. http://linuxforum.ru/help.php?section=bbcode
Также только вместо spoiler - тег code.
Большие логи лучше:
http://pastebin.ru/
http://pastebin.com/
А еще лучше поставь pastebinit:

text

$ aptitude install pastebinit
$ cat /path/to/file/sample.c | pastebinit -

В итоге получишь ссылку на лог.
http://habrahabr.ru/blogs/linux/82389/

06.02.2012 12:49 #227256

В логе загрузки ничего криминального не увидел, вообще смотри параметры загрузки наверное там можно это провернуть, за ненадобностью не пробовал - http://www.debian.org/releases/stable/s390/ch05s02.html.ru

06.02.2012 12:54 #227257

newzenon написал:
[quote=pavlar]Вот а как делать code/code не знаю Достаточно информации или dmesg надо ещё ?

Ну ту под spoiler же убираешь текст. http://linuxforum.ru/help.php?section=bbcode
Также только вместо spoiler - тег code.
Большие логи лучше:
http://pastebin.ru/
http://pastebin.com/
А еще лучше поставь pastebinit:

text

$ aptitude install pastebinit
$ cat /path/to/file/sample.c | pastebinit -

В итоге получишь ссылку на лог.
http://habrahabr.ru/blogs/linux/82389/[/quote]
У меня чего-то ничего не происходит

text

root@debian:/home/pol#  cat /path/to/file/sample.c | pastebinit
cat: /path/to/file/sample.c: Нет такого файла или каталога
Вы пытаетесь послать пустой документ, выходя

06.02.2012 13:04 · отредактировано #227261

newzenon написал:
В логе загрузки ничего криминального не увидел, вообще смотри параметры загрузки наверное там можно это провернуть, за ненадобностью не пробовал - http://www.debian.org/releases/stable/s390/ch05s02.html.ru

Да я думаю если такие сложности то лучше подождать релиза, в котором как сказано в строках перед загрузкой ,ссылки на те девайсы, на которые ругается система ,будут удалены. Я думал что есть какие-то простые решения.

06.02.2012 13:16 #227263

pavlar написал:

У меня чего-то ничего не происходит

text

root@debian:/home/pol#  cat /path/to/file/sample.c | pastebinit
cat: /path/to/file/sample.c: Нет такого файла или каталога
Вы пытаетесь послать пустой документ, выходя

Ну правильно ты отсылай существующий файло, а не какой-то /path/to/file/sample.c :_)
Например

text

cat /var/log/messages | pastebinit -

06.02.2012 13:19 #227265

Вот смотри:
[console]$ cat /var/log/messages | pastebinit -
http://paste.debian.net/155203/[/console]
:)

06.02.2012 13:32 · отредактировано #227267

newzenon написал:
Вот смотри:
[console]$ cat /var/log/messages | pastebinit -
http://paste.debian.net/155203/[/console]
:)

Всё равно :)
r

text

oot@debian:/home/pol# cat /path/to/file/sample.c | pastebinit - http://paste.debian.net/155203/
cat: /path/to/file/sample.c: Нет такого файла или каталога
Вы пытаетесь послать пустой документ, выходя
root@debian:/home/pol#

и

text

root@debian:/home/pol# cat /var/log/messages | pastebinit -
http://pastebin.com/x9z176Pc
root@debian:/home/pol# http://paste.debian.net/155203/
bash: http://paste.debian.net/155203/: Нет такого файла или каталога
root@debian:/home/pol#