Всем доброго времени суток. Проблема следующего характера: при подключении адаптера D-Link DWA-110 к компьютеру, система никак не риагирует на это событие. Пишу lsusb и не вижу подключенного устройства. В Linux я новичек, поэтому прошу помощи у опытных пользователей. Заранее спасибо.
LinuxForum.Fans
Не определяется usb устройство
Автор: k0RNy
3 сообщений
3171 просмотров
подкл устройство и покажи вывод
lsusb
dmesg
tail -20 /var/log/messages
P.S. не забываем использовать теги [ code ] [ / code ] без пробелов
lsusb
text
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 04fc:0801 Sunplus Technology Co., Ltd
Bus 001 Device 001: ID 0000:0000dmesg
text
Linux version 2.6.18-4-k7 (Debian 2.6.18.dfsg.1-12) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Mar 26 17:57:15 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000f4e30
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 126960 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 VIAK8M ) @ 0x000f8ca0
ACPI: RSDT (v001 VIAK8M AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: FADT (v001 VIAK8M AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff30c0
ACPI: MADT (v001 VIAK8M AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7f00
ACPI: DSDT (v001 VIAK8M AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:12 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Detected 1799.952 MHz processor.
Built 1 zonelists. Total pages: 131056
Kernel command line: root=/dev/hda3 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512028k/524224k available (1557k kernel code, 11588k reserved, 581k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3603.74 BogoMIPS (lpj=7207498)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 128K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
CPU0: AMD Sempron(tm) Processor 3000+ stepping 02
Total of 1 processors activated (3603.74 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4391k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb160, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
pnp: 00:02: ioport range 0x5000-0x500f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: f8000000-f80fffff
PREFETCH window: d0000000-efffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1269543680.864:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S4 S5)
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 196k freed
SCSI subsystem initialized
libata version 2.00 loaded.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 9
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xe600-0xe607, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xe608-0xe60f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
input: AT Translated Set 2 keyboard as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
hda: WDC WD1600BB-00GUC0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TSSTcorpCD/DVDW SH-S162A, ATAPI CD/DVD-ROM drive
hdd: ST380011A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
sata_via 0000:00:0f.0: version 2.0
ACPI: PCI Interrupt 0000:00:0f.0[b] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
sata_via 0000:00:0f.0: routed to hard irq line 11
ata1: SATA max UDMA/133 cmd 0xE000 ctl 0xE102 bmdma 0xE400 irq 169
ata2: SATA max UDMA/133 cmd 0xE200 ctl 0xE302 bmdma 0xE408 irq 169
scsi0 : sata_via
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdd: max request size: 512KiB
hdd: Host Protected Area detected.
current capacity is 156299375 sectors (80025 MB)
native capacity is 156301488 sectors (80026 MB)
hdd: Host Protected Area disabled.
hdd: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
hdd: cache flushes supported
hdd: hdd1
hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xE007
scsi1 : sata_via
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xE207
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 1
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 177, io base 0x0000e700
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
PCI: VIA IRQ fixup for 0000:00:10.1, from 10 to 1
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 177, io base 0x0000e800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 1
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 177, io base 0x0000e900
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
PCI: VIA IRQ fixup for 0000:00:10.3, from 11 to 1
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 177, io base 0x0000ea00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
PCI: VIA IRQ fixup for 0000:00:10.4, from 12 to 1
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: irq 177, io mem 0xf8102000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 185
eth0: VIA Rhine II at 0x1ec00, 00:16:17:20:48:5e, IRQ 185.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-1: device not accepting address 2, error -71
usb 5-1: new high speed USB device using ehci_hcd and address 4
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 128M @ 0xf0000000
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /class/input/input2
usb 1-2: new full speed USB device using uhci_hcd and address 4
FDC 0 is a post-1991 82077
Real Time Clock Driver v1.12ac
atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
bcm43xx driver
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 193
bcm43xx: Chip ID 0x4318, rev 0x2
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled
bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, disabled
bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled
bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled
bcm43xx: PHY connected
bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7
bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
usb 1-2: configuration #1 chosen from 1 choice
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP]
usb 5-1: new high speed USB device using ehci_hcd and address 5
usbcore: registered new driver hiddev
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:11.5 to 64
input: MLK USB Multi-Smart Mouse as /class/input/input3
input: USB HID v1.11 Mouse [MLK USB Multi-Smart Mouse] on usb-0000:00:10.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
ts: Compaq touchscreen protocol output
usb 5-1: new high speed USB device using ehci_hcd and address 6
Adding 530136k swap on /dev/hda4. Priority:-1 extents:1 across:530136k
EXT3 FS on hda3, internal journal
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
usb 5-1: new high speed USB device using ehci_hcd and address 13
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
usb 5-1: new high speed USB device using ehci_hcd and address 17
usb 5-1: new high speed USB device using ehci_hcd and address 20
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
usb 5-1: new high speed USB device using ehci_hcd and address 23
usb 5-1: new high speed USB device using ehci_hcd and address 24
hub 5-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
usb 5-1: new high speed USB device using ehci_hcd and address 25
usb 5-1: new high speed USB device using ehci_hcd and address 26
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209
[drm] Initialized radeon 1.25.0 20060524 on minor 0
usb 5-1: new high speed USB device using ehci_hcd and address 27
usb 5-1: new high speed USB device using ehci_hcd and address 28
mtrr: 0xd0000000,0x10000000 overlaps existing 0xdf800000,0x200000
mtrr: 0xd0000000,0x10000000 overlaps existing 0xdf800000,0x200000
mtrr: 0xd0000000,0x10000000 overlaps existing 0xdf800000,0x200000
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
usb 5-1: new high speed USB device using ehci_hcd and address 29
usb 5-1: new high speed USB device using ehci_hcd and address 30
usb 5-1: new high speed USB device using ehci_hcd and address 31
usb 5-1: new high speed USB device using ehci_hcd and address 32
usb 5-1: new high speed USB device using ehci_hcd and address 33
usb 5-1: new high speed USB device using ehci_hcd and address 34
usb 5-1: new high speed USB device using ehci_hcd and address 35
hub 5-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
usb 5-1: new high speed USB device using ehci_hcd and address 37
hub 5-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
usb 5-1: new high speed USB device using ehci_hcd and address 38
usb 5-1: new high speed USB device using ehci_hcd and address 41
usb 5-1: new high speed USB device using ehci_hcd and address 43
hub 5-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
usb 5-1: new high speed USB device using ehci_hcd and address 44
usb 5-1: new high speed USB device using ehci_hcd and address 45
usb 5-1: new high speed USB device using ehci_hcd and address 46
usb 5-1: new high speed USB device using ehci_hcd and address 48
usb 5-1: new high speed USB device using ehci_hcd and address 49
usb 5-1: new high speed USB device using ehci_hcd and address 51
usb 5-1: new high speed USB device using ehci_hcd and address 54
usb 5-1: new high speed USB device using ehci_hcd and address 55
usb 5-1: new high speed USB device using ehci_hcd and address 57
usb 5-1: new high speed USB device using ehci_hcd and address 58
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
usb 5-1: new high speed USB device using ehci_hcd and address 59
usb 5-1: new high speed USB device using ehci_hcd and address 60
usb 5-1: new high speed USB device using ehci_hcd and address 63
usb 5-1: new high speed USB device using ehci_hcd and address 64
usb 5-1: new high speed USB device using ehci_hcd and address 66
usb 5-1: new high speed USB device using ehci_hcd and address 68
usb 5-1: new high speed USB device using ehci_hcd and address 69
usb 5-1: new high speed USB device using ehci_hcd and address 78
usb 5-1: new high speed USB device using ehci_hcd and address 79
hub 5-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
usb 5-1: new high speed USB device using ehci_hcd and address 80
hub 5-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
usb 5-1: new high speed USB device using ehci_hcd and address 81
usb 5-1: device not accepting address 81, error -71
usb 5-1: new high speed USB device using ehci_hcd and address 82
usb 5-1: device not accepting address 82, error -71
NTFS driver 2.1.27 [Flags: R/W MODULE].
NTFS volume version 3.1.tail -20 /var/log/messages
text
Mar 25 19:02:03 localhost kernel: usb 5-1: new high speed USB device using ehci_hcd and address 78
Mar 25 19:02:04 localhost kernel: usb 5-1: new high speed USB device using ehci_hcd and address 79
Mar 25 19:02:05 localhost kernel: usb 5-1: new high speed USB device using ehci_hcd and address 80
Mar 25 19:02:06 localhost gconfd (pavel-2830): зап�\203�\201кае�\202�\201�\217 (ве�\200�\201и�\217 2.16.1), pid 2830 пол�\214зова�\202ел�\214 "pavel"
Mar 25 19:02:06 localhost gconfd (pavel-2830): �\236бна�\200�\203жен �\200аз�\200е�\210�\221нн�\213й ад�\200е�\201 "xml:readonly:/etc/gconf/gconf.xml.mandatory" к и�\201�\202о�\207ник�\203 кон�\204иг�\203�\200а�\206ии �\202ол�\214ко-дл�\217-�\207�\202ени�\217 в пози�\206ии 0
Mar 25 19:02:06 localhost gconfd (pavel-2830): �\236бна�\200�\203жен �\200аз�\200е�\210�\221нн�\213й ад�\200е�\201 "xml:readwrite:/home/pavel/.gconf" к запи�\201�\213ваемом�\203 и�\201�\202о�\207ник�\203 кон�\204иг�\203�\200а�\206ии в пози�\206ии 1
Mar 25 19:02:06 localhost gconfd (pavel-2830): �\236бна�\200�\203жен �\200аз�\200е�\210�\221нн�\213й ад�\200е�\201 "xml:readonly:/etc/gconf/gconf.xml.defaults" к и�\201�\202о�\207ник�\203 кон�\204иг�\203�\200а�\206ии �\202ол�\214ко-дл�\217-�\207�\202ени�\217 в пози�\206ии 2
Mar 25 19:02:06 localhost gconfd (pavel-2830): �\236бна�\200�\203жен �\200аз�\200е�\210�\221нн�\213й ад�\200е�\201 "xml:readonly:/var/lib/gconf/debian.defaults" к и�\201�\202о�\207ник�\203 кон�\204иг�\203�\200а�\206ии �\202ол�\214ко-дл�\217-�\207�\202ени�\217 в пози�\206ии 3
Mar 25 19:02:06 localhost gconfd (pavel-2830): �\236бна�\200�\203жен �\200аз�\200е�\210�\221нн�\213й ад�\200е�\201 "xml:readonly:/var/lib/gconf/defaults" к и�\201�\202о�\207ник�\203 кон�\204иг�\203�\200а�\206ии �\202ол�\214ко-дл�\217-�\207�\202ени�\217 в пози�\206ии 4
Mar 25 19:02:06 localhost kernel: usb 5-1: new high speed USB device using ehci_hcd and address 81
Mar 25 19:02:07 localhost kernel: usb 5-1: new high speed USB device using ehci_hcd and address 82
Mar 25 19:02:09 localhost gconfd (pavel-2830): �\236бна�\200�\203жен �\200аз�\200е�\210�\221нн�\213й ад�\200е�\201 "xml:readwrite:/home/pavel/.gconf" к запи�\201�\213ваемом�\203 и�\201�\202о�\207ник�\203 кон�\204иг�\203�\200а�\206ии в пози�\206ии 0
Mar 25 19:02:20 localhost gconfd (root-2909): зап�\203�\201кае�\202�\201�\217 (ве�\200�\201и�\217 2.16.1), pid 2909 пол�\214зова�\202ел�\214 "root"
Mar 25 19:02:20 localhost gconfd (root-2909): �\236бна�\200�\203жен �\200аз�\200е�\210�\221нн�\213й ад�\200е�\201 "xml:readonly:/etc/gconf/gconf.xml.mandatory" к и�\201�\202о�\207ник�\203 кон�\204иг�\203�\200а�\206ии �\202ол�\214ко-дл�\217-�\207�\202ени�\217 в пози�\206ии 0
Mar 25 19:02:20 localhost gconfd (root-2909): �\236бна�\200�\203жен �\200аз�\200е�\210�\221нн�\213й ад�\200е�\201 "xml:readwrite:/root/.gconf" к запи�\201�\213ваемом�\203 и�\201�\202о�\207ник�\203 кон�\204иг�\203�\200а�\206ии в пози�\206ии 1
Mar 25 19:02:20 localhost gconfd (root-2909): �\236бна�\200�\203жен �\200аз�\200е�\210�\221нн�\213й ад�\200е�\201 "xml:readonly:/etc/gconf/gconf.xml.defaults" к и�\201�\202о�\207ник�\203 кон�\204иг�\203�\200а�\206ии �\202ол�\214ко-дл�\217-�\207�\202ени�\217 в пози�\206ии 2
Mar 25 19:02:20 localhost gconfd (root-2909): �\236бна�\200�\203жен �\200аз�\200е�\210�\221нн�\213й ад�\200е�\201 "xml:readonly:/var/lib/gconf/debian.defaults" к и�\201�\202о�\207ник�\203 кон�\204иг�\203�\200а�\206ии �\202ол�\214ко-дл�\217-�\207�\202ени�\217 в пози�\206ии 3
Mar 25 19:02:20 localhost gconfd (root-2909): �\236бна�\200�\203жен �\200аз�\200е�\210�\221нн�\213й ад�\200е�\201 "xml:readonly:/var/lib/gconf/defaults" к и�\201�\202о�\207ник�\203 кон�\204иг�\203�\200а�\206ии �\202ол�\214ко-дл�\217-�\207�\202ени�\217 в пози�\206ии 4
Mar 25 19:02:33 localhost kernel: NTFS driver 2.1.27 [Flags: R/W MODULE].
Mar 25 19:02:33 localhost kernel: NTFS volume version 3.1. Войдите или зарегистрируйтесь, чтобы ответить.
