Здравствуйте.
У меня ноут. Установил очередные обновления, когда появился значок о необходимости перезагрузки - выключил комп. После загрузки появилось окно входа в систему gnome, а клавиатура и мышь не реагируют.
Удается запуститься из recovery mode с вводом пароля рута. Если после этого запустить gdm, то он запуститься и клавиатура с мышью работают. Настройки правда иксов не те немного.
Вот файл /var/logs/Xorg.0.log:
Показать
text
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
Current Operating System: Linux berezhnoypc 2.6.32-5-686 #1 SMP Thu Nov 3 04:23:54 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=dd0634ec-1ed1-4917-b8c7-9bb78901d7eb ro quiet
Build Date: 30 October 2011 08:56:49PM
xorg-server 2:1.7.7-14 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 8 12:20:16 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81ecce0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI: (0:0:3:5) 10de:0aa3:1043:1cf7 nVidia Corporation MCP79 Co-processor rev 177, Mem @ 0xfae80000/524288
(--) PCI:*(0:2:0:0) 10de:0873:1043:19b4 nVidia Corporation C79 [GeForce G102M] rev 177, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 270.41.19 Mon May 16 23:33:05 PDT 2011
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 02@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "1"
(**) NVIDIA(0): Option "MetaModes" "CRT: 1280x1024 +1366+0, DFP: nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-0"
(EE) Nov 08 12:20:17 NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) Nov 08 12:20:17 NVIDIA(0): log file that the GLX module has been loaded in your X
(EE) Nov 08 12:20:17 NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
(EE) Nov 08 12:20:17 NVIDIA(0): you continue to encounter problems, Please try
(EE) Nov 08 12:20:17 NVIDIA(0): reinstalling the NVIDIA driver.
(II) Nov 08 12:20:17 NVIDIA(GPU-0): Display (BenQ FP93G (CRT-0)) does not support NVIDIA 3D Vision
(II) Nov 08 12:20:17 NVIDIA(GPU-0): stereo.
(II) Nov 08 12:20:17 NVIDIA(GPU-0): Display (Chi Mei Optoelectronics corp. (DFP-0)) does not
(II) Nov 08 12:20:17 NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
(II) Nov 08 12:20:17 NVIDIA(0): NVIDIA GPU GeForce G102M (C79) at PCI:2:0:0 (GPU-0)
(--) Nov 08 12:20:17 NVIDIA(0): Memory: 524288 kBytes
(--) Nov 08 12:20:17 NVIDIA(0): VideoBIOS: 62.79.71.00.01
(--) Nov 08 12:20:17 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Nov 08 12:20:17 NVIDIA(0): Connected display device(s) on GeForce G102M at PCI:2:0:0
(--) Nov 08 12:20:17 NVIDIA(0): BenQ FP93G (CRT-0)
(--) Nov 08 12:20:17 NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0)
(--) Nov 08 12:20:17 NVIDIA(0): BenQ FP93G (CRT-0): 300.0 MHz maximum pixel clock
(--) Nov 08 12:20:17 NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): 330.0 MHz maximum pixel
(--) Nov 08 12:20:17 NVIDIA(0): clock
(--) Nov 08 12:20:17 NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): Internal Dual Link
(--) Nov 08 12:20:17 NVIDIA(0): LVDS
(**) Nov 08 12:20:17 NVIDIA(0): TwinView enabled
(II) Nov 08 12:20:17 NVIDIA(0): Display Devices found referenced in MetaMode: CRT-0, DFP-0
(II) Nov 08 12:20:17 NVIDIA(0): Assigned Display Devices: CRT-0, DFP-0
(II) Nov 08 12:20:17 NVIDIA(0): Validated modes:
(II) Nov 08 12:20:17 NVIDIA(0): "CRT:1280x1024+1366+0,DFP:nvidia-auto-select+0+0"
(II) Nov 08 12:20:17 NVIDIA(0): Virtual screen size determined to be 2646 x 1024
(--) Nov 08 12:20:18 NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
(--) Nov 08 12:20:18 NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) Nov 08 12:20:19 NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
(II) Nov 08 12:20:19 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Nov 08 12:20:19 NVIDIA(0): enough to receive ACPI hotkey events.
(II) Nov 08 12:20:19 NVIDIA(0): ACPI brightness change hotkey events enabled.
(II) Nov 08 12:20:19 NVIDIA(0): Setting mode
(II) Nov 08 12:20:19 NVIDIA(0): "CRT:1280x1024+1366+0,DFP:nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(==) NVIDIA(0): Disabling shared memory pixmaps
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event13)
(**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event13"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
(II) ACPI Virtual Keyboard Device: Close
(II) UnloadModule: "evdev"
Там он отключает клавиатуру с мышью из-за AllowEmptyInput, поэтому их нет? И что это за AllowEmptyInput?
Вот ещё dmesg.0:
Показать
text
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-39) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Nov 3 04:23:54 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffa8000 (usable)
[ 0.000000] BIOS-e820: 000000007ffa8000 - 000000007ffb0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffbff00 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffbff00 - 000000007fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000120000000 (reserved)
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7ffa8 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 377b1000 - 37fef784
[ 0.000000] Allocated new RAMDISK: 00100000 - 0093e784
[ 0.000000] Move RAMDISK from 00000000377b1000 - 0000000037fef783 to 00100000 - 0093e783
[ 0.000000] ACPI: RSDP 000fa180 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 7ffb0100 0007C (v01 093009 XSDT1450 20090930 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ffb0290 000F4 (v03 093009 FACP1450 20090930 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ffb06f0 0CCAD (v01 K40IN K40IN000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 7ffbff00 00040
[ 0.000000] ACPI: APIC 7ffb0390 00080 (v01 093009 APIC1450 20090930 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ffb0450 0003C (v01 093009 OEMMCFG 20090930 MSFT 00000097)
[ 0.000000] ACPI: OEMX 7ffb0490 00176 (v01 093009 OEMX1450 20090930 MSFT 00000097)
[ 0.000000] ACPI: WDRT 7ffb0610 00047 (v01 093009 NV-WDRT 20090930 MSFT 00000097)
[ 0.000000] ACPI: ECDT 7ffb0690 00054 (v01 093009 OEMECDT 20090930 MSFT 00000097)
[ 0.000000] ACPI: DBGP 7ffb0410 00034 (v01 093009 DBGP1450 20090930 MSFT 00000097)
[ 0.000000] ACPI: BOOT 7ffb0660 00028 (v01 093009 BOOT1450 20090930 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ffbff40 00078 (v01 093009 OEMB1450 20090930 MSFT 00000097)
[ 0.000000] ACPI: HPET 7ffbf6f0 00038 (v01 093009 OEMHPET0 20090930 MSFT 00000097)
[ 0.000000] ACPI: SSDT 7ffc0d30 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1163MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014cccf4] TEXT DATA BSS ==> [0001000000 - 00014cccf4]
[ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
[ 0.000000] #5 [00014cd000 - 00014d31de] BRK ==> [00014cd000 - 00014d31de]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000100000 - 000093e784] NEW RAMDISK ==> [0000100000 - 000093e784]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007ffa8
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007ffa8
[ 0.000000] On node 0 totalpages: 524086
[ 0.000000] free_area_init_node: node 0, pgdat c13b4860, node_mem_map c14d5200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2328 pages used for memmap
[ 0.000000] HighMem zone: 295570 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34328 r0 d23016 u1048576
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519990
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=dd0634ec-1ed1-4917-b8c7-9bb78901d7eb ro single
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Initializing HighMem for node 0 (000373fe:0007ffa8)
[ 0.000000] Memory: 2064276k/2096800k available (2504k kernel code, 30864k reserved, 1328k data, 380k init, 1191592k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
[ 0.000000] .data : 0xc1272209 - 0xc13be480 (1328 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1272209 (2504 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2100.217 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.43 BogoMIPS (lpj=8400868)
[ 0.004132] Security Framework initialized
[ 0.004192] SELinux: Disabled at boot.
[ 0.004252] Mount-cache hash table entries: 512
[ 0.004422] Initializing cgroup subsys ns
[ 0.004480] Initializing cgroup subsys cpuacct
[ 0.004539] Initializing cgroup subsys devices
[ 0.004596] Initializing cgroup subsys freezer
[ 0.004651] Initializing cgroup subsys net_cls
[ 0.004728] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004829] CPU: L2 cache: 1024K
[ 0.004886] CPU: Physical Processor ID: 0
[ 0.004943] CPU: Processor Core ID: 0
[ 0.005001] mce: CPU supports 6 MCE banks
[ 0.005064] CPU0: Thermal monitoring enabled (TM2)
[ 0.005122] using mwait in idle threads.
[ 0.005184] Performance Events: Core2 events, Intel PMU driver.
[ 0.005330] ... version: 2
[ 0.005387] ... bit width: 40
[ 0.005443] ... generic registers: 2
[ 0.005499] ... value mask: 000000ffffffffff
[ 0.005557] ... max period: 000000007fffffff
[ 0.005615] ... fixed-purpose events: 3
[ 0.005671] ... event mask: 0000000700000003
[ 0.005733] Checking 'hlt' instruction... OK.
[ 0.021214] ACPI: Core revision 20090903
[ 0.036059] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036547] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078460] CPU0: Intel Pentium(R) Dual-Core CPU T4300 @ 2.10GHz stepping 0a
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 1024K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.164075] CPU1: Intel Pentium(R) Dual-Core CPU T4300 @ 2.10GHz stepping 0a
[ 0.164610] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168047] Brought up 2 CPUs
[ 0.168104] Total of 2 processors activated (8400.47 BogoMIPS).
[ 0.168840] CPU0 attaching sched-domain:
[ 0.168844] domain 0: span 0-1 level MC
[ 0.168846] groups: group c2803778 cpus 0 group c2903778 cpus 1
[ 0.168852] CPU1 attaching sched-domain:
[ 0.168854] domain 0: span 0-1 level MC
[ 0.168856] groups: group c2903778 cpus 1 group c2803778 cpus 0
[ 0.168910] devtmpfs: initialized
[ 0.168910] regulator: core version 0.5
[ 0.168910] NET: Registered protocol family 16
[ 0.170026] ACPI: bus type pci registered
[ 0.170152] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31
[ 0.170212] PCI: Not using MMCONFIG.
[ 0.170453] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.170512] PCI: Using configuration type 1 for base access
[ 0.172229] bio: create slab <bio-0> at 0
[ 0.173194] ACPI: EC: EC description table is found, configuring boot EC
[ 0.174577] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.179148] ACPI: BIOS _OSI(Linux) query ignored
[ 0.185835] ACPI: Interpreter enabled
[ 0.185896] ACPI: (supports S0 S3 S4 S5)
[ 0.186148] ACPI: Using IOAPIC for interrupt routing
[ 0.186277] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31
[ 0.194373] PCI: MCFG area at fc000000 reserved in ACPI motherboard resources
[ 0.194433] PCI: Using MMCONFIG for extended config space
[ 0.212650] ACPI: EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62
[ 0.213104] ACPI: No dock devices found.
[ 0.213696] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.213989] pci 0000:00:03.0: reg 10 io port: [0x4f00-0x4fff]
[ 0.214094] pci 0000:00:03.2: reg 10 io port: [0x4900-0x493f]
[ 0.214109] pci 0000:00:03.2: reg 20 io port: [0x4d00-0x4d3f]
[ 0.214114] pci 0000:00:03.2: reg 24 io port: [0x4e00-0x4e3f]
[ 0.214138] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.214200] pci 0000:00:03.2: PME# disabled
[ 0.214387] pci 0000:00:03.5: reg 10 32bit mmio: [0xfae80000-0xfaefffff]
[ 0.214480] pci 0000:00:04.0: reg 10 32bit mmio: [0xfae7f000-0xfae7ffff]
[ 0.214512] pci 0000:00:04.0: supports D1 D2
[ 0.214514] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214575] pci 0000:00:04.0: PME# disabled
[ 0.214659] pci 0000:00:04.1: reg 10 32bit mmio: [0xfae7ec00-0xfae7ecff]
[ 0.214696] pci 0000:00:04.1: supports D1 D2
[ 0.214698] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214760] pci 0000:00:04.1: PME# disabled
[ 0.214851] pci 0000:00:08.0: reg 10 32bit mmio: [0xfae78000-0xfae7bfff]
[ 0.214882] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.214940] pci 0000:00:08.0: PME# disabled
[ 0.215059] pci 0000:00:0b.0: reg 10 io port: [0xc080-0xc087]
[ 0.215064] pci 0000:00:0b.0: reg 14 io port: [0xc000-0xc003]
[ 0.215069] pci 0000:00:0b.0: reg 18 io port: [0xbc00-0xbc07]
[ 0.215073] pci 0000:00:0b.0: reg 1c io port: [0xb880-0xb883]
[ 0.215078] pci 0000:00:0b.0: reg 20 io port: [0xb800-0xb80f]
[ 0.215083] pci 0000:00:0b.0: reg 24 32bit mmio: [0xfae7c000-0xfae7dfff]
[ 0.215152] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.215213] pci 0000:00:10.0: PME# disabled
[ 0.215501] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.215566] pci 0000:00:15.0: PME# disabled
[ 0.215878] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.215943] pci 0000:00:16.0: PME# disabled
[ 0.216089] pci 0000:00:09.0: transparent bridge
[ 0.216183] pci 0000:02:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
[ 0.216193] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.216203] pci 0000:02:00.0: reg 1c 64bit mmio pref: [0xf8000000-0xf9ffffff]
[ 0.216209] pci 0000:02:00.0: reg 24 io port: [0xdc00-0xdc7f]
[ 0.216215] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfafe0000-0xfaffffff]
[ 0.216275] pci 0000:00:10.0: bridge io port: [0xd000-0xdfff]
[ 0.216278] pci 0000:00:10.0: bridge 32bit mmio: [0xfaf00000-0xfbffffff]
[ 0.216283] pci 0000:00:10.0: bridge 64bit mmio pref: [0xe0000000-0xf9ffffff]
[ 0.216338] pci 0000:03:00.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.216358] pci 0000:03:00.0: reg 18 64bit mmio: [0xfeaff000-0xfeafffff]
[ 0.216377] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfeac0000-0xfeadffff]
[ 0.216417] pci 0000:03:00.0: supports D1 D2
[ 0.216419] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.216481] pci 0000:03:00.0: PME# disabled
[ 0.216568] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.216750] pci 0000:00:15.0: bridge io port: [0xe000-0xefff]
[ 0.216758] pci 0000:00:15.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.216823] pci 0000:04:00.0: reg 10 64bit mmio: [0xfebf0000-0xfebfffff]
[ 0.216875] pci 0000:04:00.0: supports D1
[ 0.216877] pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.216938] pci 0000:04:00.0: PME# disabled
[ 0.224126] pci 0000:00:16.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.224172] pci_bus 0000:00: on NUMA node 0
[ 0.224178] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.224372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.224466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.224569] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.235709] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.236420] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.237143] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.237869] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.238594] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *0, disabled.
[ 0.239318] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[ 0.240084] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[ 0.240807] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[ 0.241531] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[ 0.242257] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[ 0.242983] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[ 0.243708] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[ 0.244416] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
[ 0.245142] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[ 0.245866] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[ 0.246592] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[ 0.247322] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *9
[ 0.248036] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[ 0.248759] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 0.249481] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 0.250210] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *15
[ 0.250891] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 0.251617] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 0.252320] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 0.253040] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 0.253763] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 0.254487] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.255213] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.255937] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.256677] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.257400] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.258124] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.258854] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
[ 0.259547] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 0.260257] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.260986] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 0.261672] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *9
[ 0.262355] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *15
[ 0.263045] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *14
[ 0.263732] ACPI: PCI Interrupt Link [LSA0] (IRQs *5)
[ 0.264308] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.265031] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[ 0.265758] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[ 0.266484] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *0, disabled.
[ 0.267207] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[ 0.267931] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[ 0.268640] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *10
[ 0.269332] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *11
[ 0.270017] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.
[ 0.270744] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
[ 0.271269] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.271340] vgaarb: loaded
[ 0.271410] PCI: Using ACPI for IRQ routing
[ 0.271410] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.271410] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.271410] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.276013] Switching to clocksource tsc
[ 0.277229] pnp: PnP ACPI init
[ 0.277295] ACPI: bus type pnp registered
[ 0.284977] pnp: PnP ACPI: found 14 devices
[ 0.285036] ACPI: ACPI bus type pnp unregistered
[ 0.285093] PnPBIOS: Disabled by ACPI PNP
[ 0.285159] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.285219] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.285279] system 00:06: ioport range 0x4000-0x407f has been reserved
[ 0.285340] system 00:06: ioport range 0x4080-0x40ff has been reserved
[ 0.285400] system 00:06: ioport range 0x4400-0x447f has been reserved
[ 0.285460] system 00:06: ioport range 0x4480-0x44ff has been reserved
[ 0.285520] system 00:06: ioport range 0x4800-0x487f has been reserved
[ 0.285579] system 00:06: ioport range 0x4880-0x48ff has been reserved
[ 0.285640] system 00:06: iomem range 0xfefe2000-0xfefe3fff has been reserved
[ 0.285699] system 00:06: iomem range 0xfefe1000-0xfefe1fff has been reserved
[ 0.285760] system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.285820] system 00:06: iomem range 0xfed01000-0xfed01fff has been reserved
[ 0.285884] system 00:09: ioport range 0x250-0x253 has been reserved
[ 0.285944] system 00:09: ioport range 0x256-0x25f has been reserved
[ 0.286004] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.286073] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.286136] system 00:0a: ioport range 0x260-0x26f has been reserved
[ 0.286198] system 00:0b: ioport range 0x5000-0x507f has been reserved
[ 0.286258] system 00:0b: ioport range 0x5080-0x50ff has been reserved
[ 0.286319] system 00:0c: iomem range 0xfc000000-0xfdffffff has been reserved
[ 0.286381] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.286442] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.286502] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.286563] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.286632] system 00:0d: iomem range 0xfc000000-0xffffffff could not be reserved
[ 0.321457] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.321516] pci 0000:00:09.0: IO window: disabled
[ 0.321574] pci 0000:00:09.0: MEM window: disabled
[ 0.321633] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.321695] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02
[ 0.321754] pci 0000:00:10.0: IO window: 0xd000-0xdfff
[ 0.321814] pci 0000:00:10.0: MEM window: 0xfaf00000-0xfbffffff
[ 0.321875] pci 0000:00:10.0: PREFETCH window: 0x000000e0000000-0x000000f9ffffff
[ 0.321946] pci 0000:00:15.0: PCI bridge, secondary bus 0000:03
[ 0.322008] pci 0000:00:15.0: IO window: 0xe000-0xefff
[ 0.322075] pci 0000:00:15.0: MEM window: 0xfea00000-0xfeafffff
[ 0.322139] pci 0000:00:15.0: PREFETCH window: disabled
[ 0.322207] pci 0000:00:16.0: PCI bridge, secondary bus 0000:04
[ 0.322265] pci 0000:00:16.0: IO window: disabled
[ 0.322332] pci 0000:00:16.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.322396] pci 0000:00:16.0: PREFETCH window: disabled
[ 0.322471] pci 0000:00:09.0: setting latency timer to 64
[ 0.322478] pci 0000:00:10.0: setting latency timer to 64
[ 0.322930] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 23
[ 0.322993] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 23 (level, low) -> IRQ 23
[ 0.323069] pci 0000:00:15.0: setting latency timer to 64
[ 0.323518] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 22
[ 0.323579] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 22 (level, low) -> IRQ 22
[ 0.323654] pci 0000:00:16.0: setting latency timer to 64
[ 0.323661] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.323663] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.323666] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.323668] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.323671] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.323673] pci_bus 0000:02: resource 1 mem: [0xfaf00000-0xfbffffff]
[ 0.323676] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xf9ffffff]
[ 0.323678] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.323681] pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.323683] pci_bus 0000:04: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.323712] NET: Registered protocol family 2
[ 0.323847] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.324188] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.324672] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.325039] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.325099] TCP reno registered
[ 0.325264] NET: Registered protocol family 1
[ 0.415226] pci 0000:02:00.0: Boot video device
[ 0.415278] Unpacking initramfs...
[ 0.646243] Freeing initrd memory: 8441k freed
[ 0.651648] Simple Boot Flag at 0xef set to 0x1
[ 0.651994] audit: initializing netlink socket (disabled)
[ 0.652063] type=2000 audit(1320751650.651:1): initialized
[ 0.655427] highmem bounce pool size: 64 pages
[ 0.655487] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.656815] VFS: Disk quotas dquot_6.5.2
[ 0.656919] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.657044] msgmni has been set to 1723
[ 0.657267] alg: No test for stdrng (krng)
[ 0.657370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.657440] io scheduler noop registered
[ 0.657497] io scheduler anticipatory registered
[ 0.657554] io scheduler deadline registered
[ 0.657640] io scheduler cfq registered (default)
[ 0.657989] pcieport 0000:00:15.0: irq 24 for MSI/MSI-X
[ 0.658010] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.658373] pcieport 0000:00:16.0: irq 25 for MSI/MSI-X
[ 0.658393] pcieport 0000:00:16.0: setting latency timer to 64
[ 0.658626] isapnp: Scanning for PnP cards...
[ 1.011960] isapnp: No Plug & Play device found
[ 1.015087] Linux agpgart interface v0.103
[ 1.015250] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.015695] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.018640] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.021149] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.021211] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.021269] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.021329] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.021388] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.021491] mice: PS/2 mouse device common for all mice
[ 1.021596] rtc_cmos 00:08: RTC can wake from S4
[ 1.021680] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.021785] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.021851] cpuidle: using governor ladder
[ 1.021908] cpuidle: using governor menu
[ 1.021967] No iBFT detected.
[ 1.022327] TCP cubic registered
[ 1.022504] NET: Registered protocol family 10
[ 1.023229] Mobile IPv6
[ 1.023285] NET: Registered protocol family 17
[ 1.023358] Using IPI No-Shortcut mode
[ 1.023469] PM: Resume from disk failed.
[ 1.023479] registered taskstats version 1
[ 1.023974] rtc_cmos 00:08: setting system clock to 2011-11-08 11:27:31 UTC (1320751651)
[ 1.024086] Initalizing network drop monitor service
[ 1.024166] Freeing unused kernel memory: 380k freed
[ 1.024412] Write protecting the kernel text: 2508k
[ 1.024487] Write protecting the kernel read-only data: 920k
[ 1.039870] udev[56]: starting version 164
[ 1.062018] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.182911] usbcore: registered new interface driver usbfs
[ 1.182994] usbcore: registered new interface driver hub
[ 1.183088] usbcore: registered new device driver usb
[ 1.185899] SCSI subsystem initialized
[ 1.189172] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.189721] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
[ 1.189787] r8169 0000:03:00.0: PCI INT A -> Link[LN3A] -> GSI 19 (level, low) -> IRQ 19
[ 1.189891] r8169 0000:03:00.0: setting latency timer to 64
[ 1.189947] r8169 0000:03:00.0: irq 26 for MSI/MSI-X
[ 1.190633] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xf7d6c000, 90:e6:ba:2b:91:74, XID 18000000 IRQ 26
[ 1.191382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.191971] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
[ 1.192040] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
[ 1.192126] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 1.192129] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 1.192212] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 1.192307] ehci_hcd 0000:00:04.1: debug port 1
[ 1.192371] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 1.192386] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfae7ec00
[ 1.204513] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 1.204592] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.204652] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.204720] usb usb1: Product: EHCI Host Controller
[ 1.204778] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.204835] usb usb1: SerialNumber: 0000:00:04.1
[ 1.205056] usb usb1: configuration #1 chosen from 1 choice
[ 1.205180] hub 1-0:1.0: USB hub found
[ 1.205244] hub 1-0:1.0: 8 ports detected
[ 1.207455] libata version 3.00 loaded.
[ 1.212019] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.212663] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[ 1.212730] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[ 1.212814] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 1.212817] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 1.212887] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[ 1.212974] ohci_hcd 0000:00:04.0: irq 20, io mem 0xfae7f000
[ 1.241494] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.241560] ACPI: Thermal Zone [THRM] (51 C)
[ 1.270022] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.270085] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.270154] usb usb2: Product: OHCI Host Controller
[ 1.270211] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 1.270270] usb usb2: SerialNumber: 0000:00:04.0
[ 1.270408] usb usb2: configuration #1 chosen from 1 choice
[ 1.270495] hub 2-0:1.0: USB hub found
[ 1.270559] hub 2-0:1.0: 8 ports detected
[ 1.270676] ahci 0000:00:0b.0: version 3.0
[ 1.271178] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 5
[ 1.271249] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 5 (level, low) -> IRQ 5
[ 1.271365] ahci 0000:00:0b.0: irq 27 for MSI/MSI-X
[ 1.271405] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.271475] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part sxs
[ 1.271545] ahci 0000:00:0b.0: setting latency timer to 64
[ 1.271700] scsi0 : ahci
[ 1.271899] scsi1 : ahci
[ 1.272054] ata1: SATA max UDMA/133 abar m8192@0xfae7c000 port 0xfae7c100 irq 27
[ 1.272124] ata2: SATA max UDMA/133 abar m8192@0xfae7c000 port 0xfae7c180 irq 27
[ 1.628008] usb 1-5: new high speed USB device using ehci_hcd and address 3
[ 1.756008] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.756077] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.758257] ata2.00: ATAPI: Slimtype DVD A DS8A3S, HA26, max UDMA/100
[ 1.759423] ata2.00: configured for UDMA/100
[ 1.801961] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
[ 1.802021] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.804058] ata1.00: configured for UDMA/133
[ 1.804216] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5
[ 1.807422] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A3S HA26 PQ: 0 ANSI: 5
[ 1.808532] usb 1-5: New USB device found, idVendor=04f2, idProduct=b071
[ 1.808597] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.808657] usb 1-5: Product: CNF7129
[ 1.808712] usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.808773] usb 1-5: SerialNumber: SN0001
[ 1.808916] usb 1-5: configuration #1 chosen from 1 choice
[ 1.817571] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.817688] sd 0:0:0:0: [sda] Write Protect is off
[ 1.817747] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.817780] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.817986] sda:sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
[ 1.823646] Uniform CD-ROM driver Revision: 3.20
[ 1.823781] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.825611] sda1 sda2 < sda5 sda6 sda7 >
[ 1.886142] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.892406] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.892537] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.112013] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 2.328920] usb 2-1: New USB device found, idVendor=09da, idProduct=90a0
[ 2.328983] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.329044] usb 2-1: Product: USB Device
[ 2.329100] usb 2-1: Manufacturer: A4TECH
[ 2.329243] usb 2-1: configuration #1 chosen from 1 choice
[ 2.341628] usbcore: registered new interface driver hiddev
[ 2.346156] input: A4TECH USB Device as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.0/input/input1
[ 2.346293] generic-usb 0003:09DA:90A0.0001: input,hidraw0: USB HID v1.00 Mouse [A4TECH USB Device] on usb-0000:00:04.0-1/input0
[ 2.352351] input: A4TECH USB Device as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.1/input/input2
[ 2.352509] generic-usb 0003:09DA:90A0.0002: input,hiddev0,hidraw1: USB HID v1.00 Keyboard [A4TECH USB Device] on usb-0000:00:04.0-1/input1
[ 2.352604] usbcore: registered new interface driver usbhid
[ 2.352923] usbhid: v2.6:USB HID core driver
[ 2.698128] PM: Starting manual resume from disk
[ 2.698197] PM: Resume from partition 8:7
[ 2.698198] PM: Checking hibernation image.
[ 2.720947] PM: Error -22 checking image file
[ 2.720949] PM: Resume from disk failed.
[ 2.794762] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 4.905190] udev[395]: starting version 164
[ 5.327516] ACPI: AC Adapter [AC0] (on-line)
[ 5.348976] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 5.349059] ACPI: Power Button [PWRB]
[ 5.349169] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 5.349246] ACPI: Sleep Button [SLPB]
[ 5.349348] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 5.352372] ACPI: Lid Switch [LID]
[ 5.352512] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.352584] ACPI: Power Button [PWRF]
[ 5.389398] ACPI: SSDT 7ffc0290 00206 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 5.390195] ACPI: SSDT 7ffc0530 007FB (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 5.391616] Monitor-Mwait will be used to enter C-1 state
[ 5.391650] Monitor-Mwait will be used to enter C-2 state
[ 5.391673] Monitor-Mwait will be used to enter C-3 state
[ 5.391678] Marking TSC unstable due to TSC halts in idle
[ 5.391843] processor LNXCPU:00: registered as cooling_device0
[ 5.392364] ACPI: SSDT 7ffc01c0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 5.392938] ACPI: SSDT 7ffc04a0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 5.395325] Switching to clocksource hpet
[ 5.403569] processor LNXCPU:01: registered as cooling_device1
[ 5.654243] ACPI: WMI: Mapper loaded
[ 5.661179] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 5.705228] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.739772] ACPI: Battery Slot [BAT0] (battery present)
[ 5.855739] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.820738] nvidia: module license 'NVIDIA' taints kernel.
[ 6.820801] Disabling lock debugging due to kernel taint
[ 7.769012] asus_laptop: Asus Laptop Support version 0.42
[ 7.778591] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[ 7.778653] ACPI: I/O resource nForce2_smbus [0x4e00-0x4e3f] conflicts with ACPI region SM00 [0x4e00-0x4e3f]
[ 7.778724] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.778795] nForce2_smbus 0000:00:03.2: Error probing SMB2.
[ 7.785585] asus_laptop: BSTS called, 0xff7b returned
[ 7.785702] asus_laptop: K40IN model detected
[ 7.788275] input: Asus Laptop extra buttons as /devices/virtual/input/input8
[ 7.789311] Registered led device: asus::touchpad
[ 7.789887] asus_laptop: Brightness ignored, must be controlled by ACPI video driver
[ 7.791903] acpi device:23: registered as cooling_device2
[ 7.800607] acpi device:24: registered as cooling_device3
[ 7.801438] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:22/LNXVIDEO:00/input/input9
[ 7.801547] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 7.953959] cfg80211: Using static regulatory domain info
[ 7.954021] cfg80211: Regulatory domain: US
[ 7.954077] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.954147] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 7.954207] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.954267] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.954327] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.954387] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.954447] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 7.954764] cfg80211: Calling CRDA for country: US
[ 7.958863] Linux video capture interface: v2.00
[ 8.001472] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 23
[ 8.001537] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 23 (level, low) -> IRQ 23
[ 8.002051] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 22
[ 8.002111] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 22 (level, low) -> IRQ 22
[ 8.002185] nvidia 0000:02:00.0: setting latency timer to 64
[ 8.002189] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.002486] NVRM: loading NVIDIA UNIX x86 Kernel Module 270.41.19 Mon May 16 23:31:36 PDT 2011
[ 8.150801] elantech.c: assuming hardware version 2, firmware version 4.1.1
[ 8.185311] elantech.c: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[ 8.278707] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input10
[ 8.360500] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 8.383443] input: CNF7129 as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5:1.0/input/input11
[ 8.383572] usbcore: registered new interface driver uvcvideo
[ 8.383633] USB Video Class driver (v0.1.0)
[ 8.420193] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 18
[ 8.420262] ath9k 0000:04:00.0: PCI INT A -> Link[LN4A] -> GSI 18 (level, low) -> IRQ 18
[ 8.420338] ath9k 0000:04:00.0: setting latency timer to 64
[ 8.468615] ath: EEPROM regdomain: 0x8283
[ 8.468617] ath: EEPROM indicates we should expect a country code
[ 8.468619] ath: doing EEPROM country->regdmn map search
[ 8.468621] ath: country maps to regdmn code: 0x3
[ 8.468623] ath: Country alpha2 being used: RU
[ 8.468624] ath: Regpair used: 0x3
[ 8.694122] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 8.694777] Registered led device: ath9k-phy0::radio
[ 8.694855] Registered led device: ath9k-phy0::assoc
[ 8.694926] Registered led device: ath9k-phy0::tx
[ 8.694999] Registered led device: ath9k-phy0::rx
[ 8.695075] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xfa3e0000, irq=18
[ 8.695441] cfg80211: Calling CRDA for country: RU
[ 9.028718] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 9.028837] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 9.029348] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 9.029410] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 9.029480] hda_intel: Disable MSI for Nvidia chipset
[ 9.029572] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 9.652058] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 9.868154] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input12
[ 10.947619] Adding 2267128k swap on /dev/sda7. Priority:-1 extents:1 across:2267128k
[ 11.589199] loop: module loaded
[ 12.787927] fuse init (API version 7.13)
[ 19.785912] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 20.464278] apm: BIOS not found.
[ 21.278301] Bluetooth: Core ver 2.15
[ 21.278419] NET: Registered protocol family 31
[ 21.278479] Bluetooth: HCI device and connection manager initialized
[ 21.278539] Bluetooth: HCI socket layer initialized
[ 21.742713] Bluetooth: L2CAP ver 2.14
[ 21.742776] Bluetooth: L2CAP socket layer initialized
[ 21.840335] Bluetooth: RFCOMM TTY layer initialized
[ 21.840402] Bluetooth: RFCOMM socket layer initialized
[ 21.840462] Bluetooth: RFCOMM ver 1.11
[ 21.910142] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.910207] Bluetooth: BNEP filters: protocol multicast
[ 21.964635] Bridge firewalling registered
[ 22.236738] Bluetooth: SCO (Voice Link) ver 0.6
[ 22.236802] Bluetooth: SCO socket layer initialized
[ 22.954822] r8169 0000:03:00.0: eth0: link down
[ 22.955073] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.985516] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.908842] lp: driver loaded but no devices found
[ 25.149659] ppdev: user-space parallel port driver
Не знаю в каком логе посмотреть, но при загрузке можно увидеть, что он ругается на udev. Что мол тот не загружается, возможно уже загружен...
