LinuxForum.Fans
Тема

Графические эффекты в KDE - как включить?

Автор: phant0m 18 сообщений 4259 просмотров
#128448

Захожу в Desktop Effects - там всё неактивно и написано: "Compositing is not supported on your system.
Required X extensions (XComposite and XDamage) are not available.".
Video: Geforce GTX260
Video driver: 260.19.36

#128452

Какая видеокарта?
Возможно нужны проприетарные драйвера.

#128454

durc, дополнил в 1-м посте.

#128456

А нвидевский драйвер точно загружается?
Что у Вас в /etc/X11/xorg.conf?

#128457
durc написал:
нужны проприетарные драйвера.

А там уже по умолчанию все будет включено.

Покажи

text

lsmod
#128458

phant0m, покажите /var/log/Xorg.0.log.

#128459

smile BoardName "GeForce 8800 GTS" - это от старой видюхи осталось.

text
Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "1"
EndSection

Section "Files" EndSection

Section "InputDevice"

# generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection

Section "InputDevice"

# generated from default Identifier "Keyboard0" Driver "kbd" EndSection

Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection

Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "SONY TV" HorizSync 14.0 - 49.0 VertRefresh 48.0 - 62.0 EndSection

Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8800 GTS" BusID "PCI:4:0:0" Screen 0 EndSection

Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8800 GTS" BusID "PCI:4:0:0" Screen 1 EndSection

Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP-1: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

#128465

Запустите
[console]glxgears[/console]
Посмотрите что покажет.

P.S. для запуска glxgears должен быть установлен пакет mesa-utils.

#128467

durc, шестеренки крутятся

#128470

lsmod:
[console]Module Size Used by
nvidia 9223737 34
rndis_wlan 15988 0
cfg80211 87661 1 rndis_wlan
rfkill 10264 1 cfg80211
rndis_host 4359 1 rndis_wlan
cdc_ether 2633 1 rndis_host
usbnet 9527 3 rndis_wlan,rndis_host,cdc_ether
mii 2714 1 usbnet
powernow_k8 9832 1
cpufreq_stats 1940 0
ppdev 4058 0
cpufreq_userspace 1480 0
lp 5570 0
cpufreq_conservative 4018 0
cpufreq_powersave 602 0
xfs 417005 1
exportfs 2618 1 xfs
fuse 44033 13
ext2 46293 1
loop 9765 0
snd_hda_codec_realtek 163294 1
snd_hda_intel 16811 2
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
snd_pcm 47226 2 snd_hda_intel,snd_hda_codec
snd_seq 35463 0
uvcvideo 45514 0
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 1 snd_seq
videodev 25545 1 uvcvideo
snd 34375 12 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 3450 1 snd
v4l1_compat 10250 2 uvcvideo,videodev
snd_page_alloc 5045 2 snd_hda_intel,snd_pcm
i2c_nforce2 4464 0
parport_pc 15799 1
parport 22554 3 ppdev,lp,parport_pc
i2c_core 12696 3 nvidia,videodev,i2c_nforce2
k8temp 2551 0
asus_atk0110 6770 0
pcspkr 1207 0
joydev 6739 0
processor 26327 1 powernow_k8
button 3598 0
evdev 5609 14
psmouse 44657 0
serio_raw 2916 0
ext4 257803 5
mbcache 3762 2 ext2,ext4
jbd2 56155 1 ext4
crc16 1027 1 ext4
usbhid 28008 0
hid 50893 1 usbhid
sg 15968 0
sr_mod 10770 0
usb_storage 30585 0
cdrom 26487 1 sr_mod
sd_mod 25977 17
crc_t10dif 1012 1 sd_mod
ohci_hcd 16880 0
ahci 27270 14
floppy 40923 0
libata 115753 1 ahci
thermal 9206 0
thermal_sys 9378 2 processor,thermal
scsi_mod 101429 5 sg,sr_mod,usb_storage,sd_mod,libata
ehci_hcd 27851 0
forcedeth 40753 0
usbcore 98453 10 rndis_wlan,rndis_host,cdc_ether,usbnet,uvcvideo,usbhid,usb_storage,ohci_hcd,ehci_hcd
nls_base 4541 1 usbcore[/console]


Xorg.0.log:

text

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.28-dsa-ia32 i686 Debian
Current Operating System: Linux phant0m 2.6.32-5-686 #1 SMP Wed Jan 12 04:01:41 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=UUID=6ed1ead9-1e0e-4343-9b14-0d61ae03f2f3 ro quiet
Build Date: 12 January 2011  03:44:48AM
xorg-server 2:1.7.7-11 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 12 21:40:52 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Screen "Screen1" (1)
(**) |   |-->Monitor "Monitor1"
(**) |   |-->Device "Device1"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "1"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) Xinerama: enabled
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81ecca0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(++) using VT number 8

(--) PCI:*(0:4:0:0) 10de:05e2:107d:20dd nVidia Corporation GT200 [GeForce GTX 260] rev 161, Mem @ 0xdf000000/16777216, 0xc0000000/268435456, 0xdc000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288 (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension (II) NVIDIA GLX Module 260.19.36 Tue Jan 18 17:28:21 PST 2011 (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "nvidia" (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) NVIDIA dlloader X Driver 260.19.36 Tue Jan 18 17:12:14 PST 2011 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 04@00:00:0 (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Loading /usr/lib/xorg/modules/libwfb.so (II) Module wfb: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "RenderAccel" "true" (**) NVIDIA(0): Option "TwinView" "0" (**) NVIDIA(0): Option "MetaModes" "DFP-1: nvidia-auto-select +0+0" (**) NVIDIA(0): Option "AllowGLXWithComposite" "true" (**) Feb 12 21:40:52 NVIDIA(0): Enabling RENDER acceleration (II) Feb 12 21:40:52 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) Feb 12 21:40:52 NVIDIA(0): enabled. (II) Feb 12 21:40:53 NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:4:0:0 (GPU-0) (--) Feb 12 21:40:53 NVIDIA(0): Memory: 917504 kBytes (--) Feb 12 21:40:53 NVIDIA(0): VideoBIOS: 62.00.4b.00.00 (II) Feb 12 21:40:53 NVIDIA(0): Detected PCI Express Link width: 16X (--) Feb 12 21:40:53 NVIDIA(0): Interlaced video modes are supported on this GPU (--) Feb 12 21:40:53 NVIDIA(0): Connected display device(s) on GeForce GTX 260 at PCI:4:0:0 (--) Feb 12 21:40:53 NVIDIA(0): SONY TV (DFP-0) (--) Feb 12 21:40:53 NVIDIA(0): Samsung SyncMaster (DFP-1) (--) Feb 12 21:40:53 NVIDIA(0): SONY TV (DFP-0): 330.0 MHz maximum pixel clock (--) Feb 12 21:40:53 NVIDIA(0): SONY TV (DFP-0): Internal Dual Link TMDS (--) Feb 12 21:40:53 NVIDIA(0): Samsung SyncMaster (DFP-1): 330.0 MHz maximum pixel clock (--) Feb 12 21:40:53 NVIDIA(0): Samsung SyncMaster (DFP-1): Internal Dual Link TMDS (II) Feb 12 21:40:53 NVIDIA(0): Display Device found referenced in MetaMode: DFP-1 (II) Feb 12 21:40:54 NVIDIA(0): Assigned Display Device: DFP-1 (II) Feb 12 21:40:54 NVIDIA(0): Validated modes: (II) Feb 12 21:40:54 NVIDIA(0): "DFP-1:nvidia-auto-select+0+0" (II) Feb 12 21:40:54 NVIDIA(0): Virtual screen size determined to be 1680 x 1050 (--) Feb 12 21:40:54 NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config (--) Feb 12 21:40:54 NVIDIA(0): option (==) Feb 12 21:40:54 NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(1): RGB weight 888 (==) NVIDIA(1): Default visual is TrueColor (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(1): Option "RenderAccel" "true" (**) NVIDIA(1): Option "TwinView" "0" (**) NVIDIA(1): Option "MetaModes" "DFP-0: nvidia-auto-select +0+0" (**) NVIDIA(1): Option "AllowGLXWithComposite" "true" (**) Feb 12 21:40:54 NVIDIA(1): Enabling RENDER acceleration (II) Feb 12 21:40:54 NVIDIA(1): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:4:0:0 (GPU-0) (--) Feb 12 21:40:54 NVIDIA(1): Memory: 917504 kBytes (--) Feb 12 21:40:54 NVIDIA(1): VideoBIOS: 62.00.4b.00.00 (II) Feb 12 21:40:54 NVIDIA(1): Detected PCI Express Link width: 16X (--) Feb 12 21:40:54 NVIDIA(1): Interlaced video modes are supported on this GPU (--) Feb 12 21:40:54 NVIDIA(1): Connected display device(s) on GeForce GTX 260 at PCI:4:0:0 (--) Feb 12 21:40:54 NVIDIA(1): SONY TV (DFP-0) (--) Feb 12 21:40:54 NVIDIA(1): Samsung SyncMaster (DFP-1) (--) Feb 12 21:40:54 NVIDIA(1): SONY TV (DFP-0): 330.0 MHz maximum pixel clock (--) Feb 12 21:40:54 NVIDIA(1): SONY TV (DFP-0): Internal Dual Link TMDS (--) Feb 12 21:40:54 NVIDIA(1): Samsung SyncMaster (DFP-1): 330.0 MHz maximum pixel clock (--) Feb 12 21:40:54 NVIDIA(1): Samsung SyncMaster (DFP-1): Internal Dual Link TMDS (II) Feb 12 21:40:54 NVIDIA(1): Display Device found referenced in MetaMode: DFP-0 (II) Feb 12 21:40:54 NVIDIA(1): Assigned Display Device: DFP-0 (II) Feb 12 21:40:54 NVIDIA(1): Validated modes: (II) Feb 12 21:40:54 NVIDIA(1): "DFP-0:nvidia-auto-select+0+0" (II) Feb 12 21:40:54 NVIDIA(1): Virtual screen size determined to be 1360 x 768 (--) Feb 12 21:40:54 NVIDIA(1): DPI set to (21, 21); computed from "UseEdidDpi" X config (--) Feb 12 21:40:54 NVIDIA(1): option (==) Feb 12 21:40:54 NVIDIA(1): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) Feb 12 21:40:54 NVIDIA: Using 768.00 MB of virtual memory for indirect memory access. (II) Feb 12 21:40:54 NVIDIA(0): Initialized GPU GART. (II) Feb 12 21:40:54 NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select+0+0" (II) Loading extension NV-GLX (II) Feb 12 21:40:54 NVIDIA(0): Initialized OpenGL Acceleration (==) NVIDIA(0): Disabling shared memory pixmaps (II) Feb 12 21:40:54 NVIDIA(0): Initialized X Rendering Acceleration (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (==) RandR enabled (II) Feb 12 21:40:54 NVIDIA(1): Initialized GPU GART. (II) Feb 12 21:40:54 NVIDIA(1): Setting mode "DFP-0:nvidia-auto-select+0+0" (II) Feb 12 21:40:54 NVIDIA(1): Initialized OpenGL Acceleration (==) NVIDIA(1): Disabling shared memory pixmaps (II) Feb 12 21:40:54 NVIDIA(1): Initialized X Rendering Acceleration (==) NVIDIA(1): Backing store disabled (==) NVIDIA(1): Silken mouse enabled (==) NVIDIA(1): DPMS enabled (==) RandR enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) Initializing extension GLX (II) config/udev: Adding input device Power Button (/dev/input/event4) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.6.901, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event4" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Power Button (/dev/input/event3) (**) Power Button: Applying InputClass "evdev keyboard catchall" (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event3" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Jess Tech Dual Analog Rumble Pad (/dev/input/event0) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Jess Tech Dual Analog Rumble Pad (/dev/input/js0) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device MOSART Semi. Input Device (/dev/input/event1) (**) MOSART Semi. Input Device: Applying InputClass "evdev keyboard catchall" (**) MOSART Semi. Input Device: always reports core events (**) MOSART Semi. Input Device: Device: "/dev/input/event1" (II) MOSART Semi. Input Device: Found keys (II) MOSART Semi. Input Device: Configuring as keyboard (II) XINPUT: Adding extended input device "MOSART Semi. Input Device" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device MOSART Semi. Input Device (/dev/input/event2) (**) MOSART Semi. Input Device: Applying InputClass "evdev pointer catchall" (**) MOSART Semi. Input Device: Applying InputClass "evdev keyboard catchall" (**) MOSART Semi. Input Device: always reports core events (**) MOSART Semi. Input Device: Device: "/dev/input/event2" (II) MOSART Semi. Input Device: Found 9 mouse buttons (II) MOSART Semi. Input Device: Found scroll wheel(s) (II) MOSART Semi. Input Device: Found relative axes (II) MOSART Semi. Input Device: Found x and y relative axes (II) MOSART Semi. Input Device: Found absolute axes (II) MOSART Semi. Input Device: Found keys (II) MOSART Semi. Input Device: Configuring as mouse (II) MOSART Semi. Input Device: Configuring as keyboard (**) MOSART Semi. Input Device: YAxisMapping: buttons 4 and 5 (**) MOSART Semi. Input Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "MOSART Semi. Input Device" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) MOSART Semi. Input Device: initialized for relative axes. (WW) MOSART Semi. Input Device: ignoring absolute axes. (II) config/udev: Adding input device MOSART Semi. Input Device (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device USB2.0 Camera (/dev/input/event6) (**) USB2.0 Camera: Applying InputClass "evdev keyboard catchall" (**) USB2.0 Camera: always reports core events (**) USB2.0 Camera: Device: "/dev/input/event6" (II) USB2.0 Camera: Found keys (II) USB2.0 Camera: Configuring as keyboard (II) XINPUT: Adding extended input device "USB2.0 Camera" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device PC Speaker (/dev/input/event5) (II) No input driver/identifier specified (ignoring) (II) Feb 12 22:03:17 NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select+0+0"

#128622
text

eselect opengl list

должен выдать вот так:


Available OpenGL implementations:
[1] nvidia *
[2] xorg-x11

Если звездочка стоит не на nvidia, сделай вот так:

text

eselect opengl set nvidia
#128625

mycetophylax, eselect: command not found
У меня же не Gentoo smile

if you use gentoo just install eselect and then do "eselect opengl list" to see what is instaled and then do "eselect opengl set 1 or 2" ...
#128629
phant0m написал:

У меня же не Gentoo smile

Извиняюсь за невнимательность wink
Тогда надо проверить, что движок выбран OpenGL, а не Xrender

#128631

mycetophylax, Не могу. На пункте Desktop Effects вкладки неактивны - не открываются.

#128636

Похоже с Xinerama эффекты не работают.
Так и есть, отключил - появились прозрачности и в Desktop Effects всё активировалось. Теперь другая проблема: Как при этом еще и телек подключить.

#128649
phant0m написал:
Теперь другая проблема: Как при этом еще и телек подключить.

Советуют TwinView без Xinerama.

#128651

Только на TwinView полноэкранные приложения оказываются посередине двух мониторов.

Войдите или зарегистрируйтесь, чтобы ответить.