Установку делаю с флешки sysinstall не видет HDD подскажите как можно это исправить.
Ниже вывод dmesg и pciconf -lv
dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-STABLE #0: Mon May 5 01:13:06 UTC 2008
technix@amateria:/Frenzy/frenzybuild/build/Frenzy/frenzybuild/src/sys/FRENZY
WARNING: debug.mpsafenet forced to 0 as ng_h4 requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
ACPI APIC Table: <HPQOEM SLIC-MPC>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1600.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106c2 Stepping = 2
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40c39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,<b22>>
AMD Features=0x100000<NX>
AMD Features2=0x1<LAHF>
Logical CPUs per core: 2
real memory = 938397696 (894 MB)
avail memory = 900096000 (858 MB)
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
wlan: mac acl policy registered
netsmb_dev: loaded
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1608-0x160b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x27> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
cpu0: <ACPI CPU> on acpi0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_button1: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xfff00000-0xffffffff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 3.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory, RAM> at device 3.1 (no driver attached)
ichsmb0: <SMBus controller> port 0x3080-0x30bf,0x3040-0x307f,0x3000-0x303f irq 16 at device 3.2 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pci0: <memory, RAM> at device 3.3 (no driver attached)
pci0: <processor> at device 3.5 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0x53108000-0x53108fff irq 21 at device 4.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 5 ports with 5 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0x53109200-0x531092ff irq 22 at device 4.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: waiting for BIOS to give up control
usb1: EHCI version 1.0
usb1: companion controller, 12 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 5 ports with 5 removable, self powered
umass0: Kingston DataTraveler 2.0, rev 2.00/1.10, addr 2
ohci1: <OHCI (generic) USB controller> mem 0x53107000-0x53107fff irq 23 at device 6.0 on pci0
ohci1: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci1
usb2: USB revision 1.0
uhub2: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0x53109100-0x531091ff irq 20 at device 6.1 on pci0
ehci1: [GIANT-LOCKED]
usb3: waiting for BIOS to give up control
usb3: EHCI version 1.0
usb3: companion controller, 12 ports each: usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci1
usb3: USB revision 2.0
uhub3: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
ugen0: Bison HP Webcam-50, rev 2.00/0.03, addr 2
pci0: <multimedia> at device 8.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci0: <network, ethernet> at device 10.0 (no driver attached)
atapci0: <nVidia AHCI controller> port 0x30d8-0x30df,0x30ec-0x30ef,0x30d0-0x30d7,0x30e8-0x30eb,0x30c0-0x30cf mem 0x53104000-0x53105fff irq 23 at device 11.0 on pci0
atapci0: AHCI Version 01.20 controller with 6 ports detected
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ata3: port not implemented
ata4: <ATA channel 2> on atapci0
ata4: port not implemented
ata5: <ATA channel 3> on atapci0
ata5: port not implemented
ata6: <ATA channel 4> on atapci0
ata6: port not implemented
ata7: <ATA channel 5> on atapci0
ata7: port not implemented
pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pci4: <ACPI PCI bus> on pcib4
acpi_tz0: <Thermal Zone> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1600006560 Hz quality 800
Timecounters tick every 1.000 msec
IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry
IPsec: Initialized Security Association Processing.
IP Filter: v4.1.28 initialized. Default = pass all, Logging = enabled
ncp_load: loaded
ipfw2 (+ipv6) initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
md0: Preloaded image </boot/frenzyroot> 2097152 bytes at 0xc0df422c
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 3936MB (8060928 512 byte sectors: 255H 63S/T 501C)
Trying to mount root from ufs:/dev/md0
md1.uzip: 4483 x 130560 blocks
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
